Indexable & Solid Carbide Mills

Home > Milling

Filter Your Results

Applications

Balanced (212)
Chamfering (1200)
Channeling (4033)
Contouring (1346)
Coolant Thru (2134)
Corner Rounding (40)
Countersinking (434)
Drilling (520)
Facing (3384)
Flat Bottom (18)
Groove (17)
Helical / Corkscrew (5661)
Lead Angle (774)
OD (17)
Plunging (1218)
Pocketing (2685)
Profile (17)
Ramping (5693)
Shoulder (6079)
Slabbing (1869)
Slotting (446)
Spot Drilling (39)
T-Slotting (196)
Turn (17)

Workpiece Material

Aluminum (910)
Cast Iron (5313)
Hardened Steel (4839)
Heat Resistant Alloys (5570)
Stainless Steel (5642)
Steel (5667)

Grade

IN04S (1)
IN0560 (1)
IN05S (461)
IN1005 (14)
IN1030 (85)
IN1040 (1)
IN10K (80)
IN1530 (6)
IN1540 (4)
IN15K (41)
IN2003 (55)
IN2004 (2)
IN2005 (1382)
IN2006 (224)
IN2010 (8)
IN2015 (24)
IN2030 (49)
IN2035 (65)
IN2036 (37)
IN2040 (30)
IN2203 (80)
IN2205 (2545)
IN2504 (84)
IN2505 (420)
IN2510 (93)
IN2515 (27)
IN2530 (344)
IN2535 (57)
IN2536 (15)
IN2537 (5)
IN2540 (59)
IN3005 (1)
IN30M (49)
IN4005 (97)
IN4010 (7)
IN4015 (66)
IN4030 (170)
IN4035 (56)
IN4040 (19)
IN40P (13)
IN5015 (10)
IN62C (1)
IN6510 (1)
IN6515 (15)
IN6535 (1)
IN6537 (57)
IN7035 (34)
IN7036 (8)
IN70N (7)
IN71N (4)
IN72N (1)
IN76N (10)
IN80B (5)
IN90D (7)
K10 (26)
TT5100 (27)
TT6030 (25)
TT6080 (1)
TT7220 (4)
TT8020 (18)
TT9030 (5)
UF10 (1)

Coating

CVD, Tin-TiCn (10)
MT -CVD, TiCN/Al2O3/TiN (116)
MT-CVD, TiN/TiCN/AI2O3/TiN (27)
None (707)
PVD, AlTiCrSiN (2625)
PVD, AlTiN/TiN (6)
PVD, TiAlN (1906)
PVD, TiAlN/AlCrO (415)
PVD, TiAlN/TiN (1099)
PVD, TiCN (122)
PVD, TiCN-TiN (10)
PVD, TiN (1)
Thin Film Diamond (1)

Cutting Dia.

0.008 [0.20mm] (2)
0.012 [0.30mm] (1)
0.016 [0.40mm] (1)
0.020 [0.50mm] (3)
0.024 [0.60mm] (3)
0.032 [0.80mm] (3)
0.039 [1.00mm] (16)
0.047 [1.20mm] (3)
0.059 [1.50mm] (5)
0.059 [1.50mm] (22)
0.062 [1.57mm] (1)
0.063 [1.59mm] (1)
0.063 [1.60mm] (1)
0.077 [1.95mm] (3)
0.078 [1.98mm] (1)
0.079 [2.00mm] (23)
0.079 [2.01mm] (5)
0.094 [2.38mm] (1)
0.094 [2.39mm] (1)
0.098 [2.50mm] (3)
0.118 [3.00mm] (1)
0.118 [3.00mm] (28)
0.122 [3.10mm] (1)
0.125 [3.18mm] (30)
0.129 [3.28mm] (1)
0.150 [3.81mm] (2)
0.156 [3.96mm] (2)
0.156 [3.97mm] (2)
0.158 [4.00mm] (31)
0.162 [4.12mm] (1)
0.167 [4.24mm] (2)
0.185 [4.70mm] (1)
0.187 [4.75mm] (2)
0.188 [4.76mm] (26)
0.190 [4.83mm] (1)
0.197 [5.00mm] (24)
0.200 [5.08mm] (1)
0.201 [5.10mm] (1)
0.202 [5.13mm] (1)
0.207 [5.26mm] (1)
0.209 [5.30mm] (1)
0.218 [5.54mm] (1)
0.219 [5.55mm] (1)
0.219 [5.56mm] (1)
0.219 [5.56mm] (2)
0.222 [5.65mm] (2)
0.224 [5.69mm] (2)
0.224 [5.70mm] (1)
0.228 [5.80mm] (1)
0.234 [5.94mm] (1)
0.236 [5.99mm] (2)
0.236 [6.00mm] (70)
0.242 [6.15mm] (1)
0.250 [6.35mm] (263)
0.252 [6.40mm] (1)
0.254 [6.46mm] (1)
0.256 [6.50mm] (2)
0.266 [6.76mm] (3)
0.268 [6.80mm] (2)
0.276 [7.00mm] (3)
0.291 [7.39mm] (3)
0.295 [7.49mm] (1)
0.298 [7.57mm] (1)
0.299 [7.60mm] (3)
0.303 [7.70mm] (7)
0.307 [7.80mm] (1)
0.312 [7.92mm] (43)
0.313 [7.94mm] (193)
0.314 [7.98mm] (3)
0.315 [8.00mm] (119)
0.320 [8.13mm] (2)
0.327 [8.31mm] (3)
0.330 [8.38mm] (1)
0.333 [8.46mm] (3)
0.335 [8.50mm] (1)
0.343 [8.71mm] (1)
0.351 [8.92mm] (1)
0.354 [8.99mm] (5)
0.354 [9.00mm] (1)
0.358 [9.09mm] (1)
0.365 [9.27mm] (4)
0.370 [9.40mm] (3)
0.374 [9.50mm] (2)
0.375 [9.53mm] (409)
0.382 [9.70mm] (1)
0.386 [9.80mm] (1)
0.394 [10.00mm] (143)
0.394 [10.01mm] (6)
0.415 [10.54mm] (3)
0.423 [10.74mm] (3)
0.428 [10.87mm] (1)
0.431 [10.94mm] (1)
0.431 [10.95mm] (2)
0.433 [11.00mm] (4)
0.436 [11.07mm] (6)
0.437 [11.10mm] (4)
0.438 [11.11mm] (71)
0.438 [11.13mm] (7)
0.445 [11.30mm] (1)
0.450 [11.43mm] (3)
0.453 [11.50mm] (1)
0.455 [11.56mm] (2)
0.457 [11.60mm] (3)
0.461 [11.70mm] (2)
0.471 [11.96mm] (1)
0.472 [11.99mm] (4)
0.472 [12.00mm] (161)
0.476 [12.09mm] (6)
0.481 [12.21mm] (1)
0.481 [12.22mm] (1)
0.488 [12.40mm] (3)
0.490 [12.45mm] (1)
0.497 [12.62mm] (3)
0.500 [12.70mm] (766)
0.510 [12.95mm] (3)
0.512 [13.00mm] (5)
0.524 [13.31mm] (3)
0.528 [13.41mm] (2)
0.532 [13.50mm] (7)
0.533 [13.54mm] (1)
0.534 [13.56mm] (3)
0.540 [13.72mm] (3)
0.549 [13.94mm] (1)
0.551 [14.00mm] (15)
0.561 [14.25mm] (1)
0.562 [14.27mm] (4)
0.571 [14.50mm] (1)
0.573 [14.55mm] (2)
0.575 [14.61mm] (3)
0.579 [14.70mm] (6)
0.586 [14.88mm] (1)
0.588 [14.94mm] (1)
0.591 [15.00mm] (8)
0.594 [15.09mm] (3)
0.600 [15.24mm] (2)
0.602 [15.29mm] (1)
0.606 [15.39mm] (1)
0.607 [15.42mm] (2)
0.610 [15.50mm] (4)
0.618 [15.70mm] (2)
0.618 [15.70mm] (13)
0.620 [15.75mm] (4)
0.623 [15.82mm] (2)
0.625 [15.88mm] (567)
0.628 [15.95mm] (1)
0.630 [16.00mm] (166)
0.630 [16.00mm] (7)
0.650 [16.50mm] (4)
0.650 [16.51mm] (3)
0.654 [16.60mm] (1)
0.673 [17.09mm] (2)
0.677 [17.20mm] (2)
0.681 [17.30mm] (3)
0.683 [17.35mm] (1)
0.684 [17.37mm] (4)
0.686 [17.42mm] (6)
0.696 [17.68mm] (5)
0.697 [17.70mm] (14)
0.699 [17.75mm] (2)
0.700 [17.78mm] (4)
0.706 [17.93mm] (1)
0.709 [18.00mm] (1)
0.720 [18.29mm] (3)
0.725 [18.42mm] (1)
0.744 [18.90mm] (1)
0.748 [19.00mm] (3)
0.750 [19.05mm] (714)
0.755 [19.18mm] (4)
0.768 [19.50mm] (6)
0.773 [19.63mm] (8)
0.775 [19.69mm] (1)
0.776 [19.70mm] (2)
0.778 [19.76mm] (1)
0.779 [19.77mm] (3)
0.779 [19.79mm] (1)
0.780 [19.81mm] (3)
0.787 [19.99mm] (2)
0.787 [20.00mm] (152)
0.808 [20.52mm] (1)
0.811 [20.60mm] (2)
0.824 [20.93mm] (3)
0.831 [21.10mm] (1)
0.838 [21.29mm] (1)
0.841 [21.36mm] (4)
0.843 [21.40mm] (1)
0.850 [21.59mm] (2)
0.850 [21.60mm] (6)
0.854 [21.69mm] (2)
0.854 [21.70mm] (29)
0.858 [21.79mm] (1)
0.866 [22.00mm] (3)
0.870 [22.10mm] (1)
0.875 [22.23mm] (12)
0.878 [22.30mm] (1)
0.886 [22.50mm] (5)
0.900 [22.86mm] (7)
0.902 [22.90mm] (1)
0.910 [23.11mm] (4)
0.927 [23.55mm] (2)
0.929 [23.60mm] (6)
0.930 [23.62mm] (2)
0.933 [23.70mm] (1)
0.935 [23.75mm] (1)
0.936 [23.77mm] (2)
0.946 [24.03mm] (3)
0.948 [24.08mm] (1)
0.950 [24.13mm] (5)
0.953 [24.21mm] (1)
0.955 [24.25mm] (1)
0.957 [24.30mm] (5)
0.961 [24.40mm] (1)
0.969 [24.60mm] (1)
0.970 [24.64mm] (7)
0.972 [24.70mm] (7)
0.976 [24.80mm] (1)
0.984 [24.99mm] (1)
0.984 [25.00mm] (111)
0.998 [25.35mm] (2)
1.000 [25.40mm] (705)
1.022 [25.96mm] (5)
1.028 [26.11mm] (6)
1.029 [26.12mm] (3)
1.029 [26.14mm] (1)
1.039 [26.40mm] (1)
1.070 [27.18mm] (1)
1.074 [27.28mm] (1)
1.075 [27.30mm] (1)
1.083 [27.50mm] (1)
1.084 [27.53mm] (1)
1.090 [27.69mm] (7)
1.091 [27.70mm] (4)
1.102 [28.00mm] (2)
1.138 [28.90mm] (2)
1.170 [29.72mm] (4)
1.177 [29.90mm] (3)
1.180 [29.97mm] (2)
1.181 [30.00mm] (8)
1.183 [30.05mm] (2)
1.185 [30.10mm] (1)
1.186 [30.12mm] (3)
1.196 [30.38mm] (3)
1.200 [30.48mm] (3)
1.205 [30.60mm] (5)
1.217 [30.90mm] (2)
1.218 [30.94mm] (2)
1.230 [31.25mm] (1)
1.233 [31.32mm] (2)
1.243 [31.57mm] (1)
1.248 [31.70mm] (7)
1.250 [31.75mm] (189)
1.252 [31.80mm] (1)
1.260 [32.00mm] (61)
1.268 [32.20mm] (2)
1.300 [33.02mm] (1)
1.324 [33.63mm] (2)
1.339 [34.00mm] (1)
1.347 [34.20mm] (2)
1.350 [34.29mm] (1)
1.354 [34.40mm] (2)
1.370 [34.80mm] (1)
1.378 [35.00mm] (13)
1.384 [35.15mm] (2)
1.408 [35.76mm] (2)
1.417 [36.00mm] (1)
1.433 [36.40mm] (1)
1.440 [36.58mm] (2)
1.450 [36.83mm] (5)
1.464 [37.19mm] (1)
1.496 [38.00mm] (2)
1.500 [38.10mm] (166)
1.506 [38.25mm] (1)
1.520 [38.60mm] (7)
1.521 [38.63mm] (2)
1.528 [38.81mm] (2)
1.533 [38.94mm] (1)
1.545 [39.25mm] (1)
1.559 [39.60mm] (1)
1.561 [39.65mm] (3)
1.562 [39.67mm] (14)
1.563 [39.70mm] (9)
1.575 [40.00mm] (77)
1.583 [40.21mm] (2)
1.592 [40.44mm] (1)
1.593 [40.46mm] (2)
1.645 [41.78mm] (3)
1.650 [41.90mm] (2)
1.654 [42.00mm] (6)
1.670 [42.42mm] (2)
1.677 [42.60mm] (1)
1.683 [42.75mm] (1)
1.686 [42.82mm] (2)
1.691 [42.95mm] (2)
1.696 [43.08mm] (1)
1.717 [43.61mm] (1)
1.723 [43.76mm] (3)
1.732 [44.00mm] (1)
1.749 [44.42mm] (1)
1.750 [44.45mm] (6)
1.755 [44.58mm] (1)
1.766 [44.86mm] (1)
1.768 [44.90mm] (2)
1.772 [45.00mm] (10)
1.795 [45.59mm] (1)
1.820 [46.23mm] (2)
1.850 [46.99mm] (1)
1.850 [47.00mm] (1)
1.870 [47.50mm] (1)
1.878 [47.70mm] (1)
1.884 [47.85mm] (2)
1.901 [48.29mm] (1)
1.902 [48.31mm] (1)
1.906 [48.40mm] (2)
1.912 [48.57mm] (1)
1.913 [48.60mm] (5)
1.940 [49.28mm] (2)
1.950 [49.53mm] (4)
1.969 [50.00mm] (73)
1.980 [50.30mm] (1)
2.000 [50.80mm] (194)
2.008 [51.00mm] (2)
2.020 [51.31mm] (1)
2.024 [51.41mm] (1)
2.028 [51.51mm] (1)
2.031 [51.59mm] (1)
2.047 [52.00mm] (4)
2.090 [53.09mm] (2)
2.093 [53.16mm] (2)
2.126 [54.00mm] (2)
2.144 [54.46mm] (3)
2.161 [54.89mm] (1)
2.170 [55.12mm] (4)
2.175 [55.25mm] (1)
2.177 [55.30mm] (1)
2.183 [55.45mm] (1)
2.185 [55.50mm] (1)
2.217 [56.31mm] (2)
2.218 [56.34mm] (3)
2.220 [56.39mm] (1)
2.243 [56.97mm] (1)
2.252 [57.20mm] (1)
2.257 [57.33mm] (1)
2.291 [58.20mm] (1)
2.315 [58.80mm] (2)
2.319 [58.90mm] (2)
2.350 [59.69mm] (1)
2.362 [60.00mm] (1)
2.370 [60.20mm] (1)
2.373 [60.27mm] (1)
2.384 [60.55mm] (2)
2.399 [60.93mm] (2)
2.425 [61.60mm] (4)
2.440 [61.98mm] (1)
2.450 [62.23mm] (5)
2.480 [63.00mm] (79)
2.484 [63.09mm] (1)
2.500 [63.50mm] (119)
2.502 [63.55mm] (1)
2.520 [64.00mm] (1)
2.520 [64.01mm] (2)
2.529 [64.22mm] (1)
2.530 [64.26mm] (1)
2.532 [64.30mm] (2)
2.566 [65.18mm] (2)
2.598 [66.00mm] (2)
2.677 [68.00mm] (1)
2.696 [68.48mm] (1)
2.701 [68.60mm] (1)
2.750 [69.85mm] (1)
2.755 [69.98mm] (1)
2.769 [70.33mm] (1)
2.842 [72.20mm] (1)
2.885 [73.28mm] (2)
2.940 [74.68mm] (2)
2.950 [74.93mm] (4)
2.953 [75.00mm] (4)
3.000 [76.20mm] (156)
3.039 [77.20mm] (1)
3.071 [78.00mm] (1)
3.092 [78.54mm] (2)
3.095 [78.60mm] (4)
3.106 [78.90mm] (1)
3.144 [79.86mm] (3)
3.150 [80.00mm] (71)
3.159 [80.24mm] (2)
3.170 [80.52mm] (2)
3.212 [81.58mm] (2)
3.217 [81.71mm] (1)
3.234 [82.14mm] (1)
3.250 [82.55mm] (2)
3.252 [82.60mm] (1)
3.254 [82.65mm] (1)
3.307 [84.00mm] (1)
3.319 [84.30mm] (2)
3.370 [85.60mm] (1)
3.384 [85.95mm] (2)
3.398 [86.31mm] (2)
3.484 [88.49mm] (1)
3.500 [88.90mm] (2)
3.501 [88.93mm] (1)
3.529 [89.64mm] (1)
3.588 [91.14mm] (1)
3.673 [93.30mm] (1)
3.730 [94.74mm] (1)
3.750 [95.25mm] (1)
3.755 [95.38mm] (1)
3.759 [95.48mm] (1)
3.882 [98.60mm] (4)
3.885 [98.68mm] (2)
3.937 [100.00mm] (71)
3.940 [100.08mm] (2)
3.950 [100.33mm] (6)
4.000 [101.60mm] (142)
4.092 [103.94mm] (2)
4.144 [105.26mm] (1)
4.170 [105.92mm] (2)
4.223 [107.26mm] (1)
4.237 [107.62mm] (1)
4.254 [108.05mm] (1)
4.372 [111.05mm] (1)
4.444 [112.88mm] (1)
4.528 [115.01mm] (1)
4.755 [120.78mm] (1)
4.757 [120.83mm] (1)
4.866 [123.60mm] (6)
4.885 [124.08mm] (2)
4.921 [125.00mm] (61)
4.940 [125.48mm] (2)
4.950 [125.73mm] (6)
5.000 [127.00mm] (71)
5.063 [128.60mm] (2)
5.092 [129.34mm] (2)
5.144 [130.66mm] (1)
5.159 [131.04mm] (1)
5.209 [132.31mm] (1)
5.215 [132.46mm] (1)
5.234 [132.94mm] (1)
5.252 [133.40mm] (1)
5.253 [133.43mm] (1)
5.370 [136.40mm] (1)
5.372 [136.45mm] (1)
5.444 [138.28mm] (1)
5.528 [140.41mm] (1)
5.669 [144.00mm] (1)
5.755 [146.18mm] (1)
5.950 [151.13mm] (4)
6.000 [152.40mm] (92)
6.244 [158.60mm] (4)
6.299 [160.00mm] (43)
6.500 [165.10mm] (1)
7.000 [177.80mm] (2)
7.144 [181.46mm] (1)
7.159 [181.84mm] (1)
7.235 [183.77mm] (1)
7.470 [189.74mm] (1)
7.750 [196.85mm] (1)
7.819 [198.60mm] (2)
7.874 [200.00mm] (20)
7.950 [201.93mm] (4)
8.000 [203.20mm] (55)
8.030 [203.96mm] (1)
9.144 [232.26mm] (1)
9.470 [240.54mm] (1)
9.750 [247.65mm] (1)
9.787 [248.60mm] (4)
9.843 [250.00mm] (15)
9.950 [252.73mm] (4)
10.000 [254.00mm] (32)
10.030 [254.76mm] (1)
11.470 [291.34mm] (1)
11.750 [298.45mm] (1)
12.000 [304.80mm] (20)
12.030 [305.56mm] (1)
12.402 [315.00mm] (8)
14.000 [355.60mm] (5)
15.748 [400.00mm] (4)
20.787 [528.00mm] (1)
84.000 [2133.60mm] (1)
109.000 [2768.60mm] (1)
144.000 [3657.60mm] (1)
198.600 [5044.44mm] (2)

0.153 [3.89mm] (4)
0.157 [3.99mm] (2)
0.157 [4.00mm] (6)
0.200 [5.08mm] (4)
0.203 [5.16mm] (20)
0.236 [5.99mm] (1)
0.236 [6.00mm] (20)
0.243 [6.17mm] (3)
0.246 [6.25mm] (10)
0.248 [6.30mm] (1)
0.250 [6.35mm] (8)
0.260 [6.60mm] (4)
0.272 [6.91mm] (25)
0.275 [6.99mm] (7)
0.279 [7.09mm] (5)
0.287 [7.30mm] (4)
0.311 [7.90mm] (2)
0.315 [8.00mm] (10)
0.315 [8.00mm] (8)
0.319 [8.10mm] (2)
0.338 [8.59mm] (2)
0.354 [8.99mm] (1)
0.354 [9.00mm] (21)
0.365 [9.27mm] (27)
0.370 [9.40mm] (15)
0.372 [9.45mm] (5)
0.375 [9.53mm] (4)
0.380 [9.65mm] (6)
0.386 [9.80mm] (3)
0.394 [10.00mm] (16)
0.394 [10.01mm] (12)
0.417 [10.60mm] (4)
0.421 [10.69mm] (24)
0.433 [11.00mm] (14)
0.434 [11.02mm] (8)
0.435 [11.05mm] (1)
0.441 [11.20mm] (3)
0.450 [11.43mm] (17)
0.453 [11.51mm] (4)
0.472 [11.99mm] (1)
0.472 [12.00mm] (44)
0.480 [12.19mm] (6)
0.496 [12.60mm] (3)
0.500 [12.70mm] (67)
0.512 [13.00mm] (104)
0.514 [13.06mm] (25)
0.520 [13.21mm] (6)
0.521 [13.23mm] (18)
0.530 [13.46mm] (28)
0.531 [13.49mm] (22)
0.539 [13.69mm] (4)
0.550 [13.97mm] (1)
0.551 [14.00mm] (10)
0.551 [14.00mm] (1)
0.559 [14.20mm] (8)
0.560 [14.22mm] (16)
0.570 [14.48mm] (6)
0.623 [15.81mm] (1)
0.625 [15.88mm] (7)
0.629 [15.98mm] (2)
0.630 [16.00mm] (53)
0.638 [16.21mm] (2)
0.690 [17.52mm] (2)
0.695 [17.65mm] (1)
0.706 [17.93mm] (7)
0.708 [17.98mm] (9)
0.748 [19.00mm] (31)
0.750 [19.05mm] (10)
0.752 [19.10mm] (8)
0.787 [20.00mm] (39)
0.842 [21.39mm] (26)
0.925 [23.50mm] (11)
1.000 [25.40mm] (3)

Adaption Workpiece Side

3/8" Square (1)
9 x 12 mm (1)
Chip Surfer T05 (50)
Chip Surfer T05 - T15 (1)
Chip Surfer T06 (77)
Chip Surfer T08 (84)
Chip Surfer T10 (77)
Chip Surfer T12 (70)
Chip Surfer T15 (56)
Chip Surfer T21 (20)
Multi-Surfer LP (8)
Multi-Surfer LQ (11)
Multi-Surfer LR (7)
T20 Torx (1)
T25 Torx (1)
T30 Torx (1)
T40 Torx (1)
T50 Torx (1)

Corner Radius

0.000 [0.00mm] (1618)
0.001 [0.02mm] (1)
0.002 [0.05mm] (7)
0.004 [0.10mm] (11)
0.004 [0.10mm] (2)
0.005 [0.13mm] (3)
0.006 [0.15mm] (4)
0.006 [0.15mm] (5)
0.007 [0.18mm] (15)
0.008 [0.20mm] (133)
0.008 [0.20mm] (1)
0.008 [0.20mm] (62)
0.010 [0.25mm] (3)
0.010 [0.25mm] (64)
0.011 [0.28mm] (4)
0.012 [0.30mm] (9)
0.012 [0.30mm] (2)
0.013 [0.33mm] (2)
0.015 [0.38mm] (715)
0.016 [0.40mm] (109)
0.016 [0.41mm] (41)
0.020 [0.50mm] (57)
0.020 [0.50mm] (7)
0.020 [0.51mm] (72)
0.021 [0.53mm] (6)
0.022 [0.56mm] (2)
0.023 [0.58mm] (4)
0.024 [0.60mm] (6)
0.024 [0.61mm] (10)
0.025 [0.64mm] (3)
0.028 [0.70mm] (3)
0.028 [0.71mm] (8)
0.030 [0.75mm] (5)
0.030 [0.76mm] (5)
0.030 [0.76mm] (500)
0.031 [0.79mm] (658)
0.031 [0.79mm] (13)
0.032 [0.80mm] (32)
0.032 [0.81mm] (11)
0.034 [0.86mm] (20)
0.039 [0.99mm] (4)
0.039 [1.00mm] (49)
0.039 [1.00mm] (12)
0.040 [1.02mm] (18)
0.043 [1.09mm] (4)
0.043 [1.10mm] (2)
0.047 [1.19mm] (47)
0.047 [1.20mm] (3)
0.050 [1.27mm] (13)
0.051 [1.30mm] (1)
0.059 [1.50mm] (22)
0.059 [1.50mm] (9)
0.060 [1.52mm] (539)
0.062 [1.57mm] (275)
0.063 [1.59mm] (6)
0.063 [1.60mm] (8)
0.063 [1.60mm] (38)
0.065 [1.65mm] (3)
0.074 [1.88mm] (1)
0.078 [1.98mm] (10)
0.079 [2.00mm] (68)
0.079 [2.01mm] (2)
0.080 [2.03mm] (2)
0.085 [2.16mm] (2)
0.090 [2.29mm] (333)
0.093 [2.36mm] (37)
0.094 [2.37mm] (2)
0.094 [2.39mm] (8)
0.096 [2.44mm] (1)
0.098 [2.50mm] (14)
0.105 [2.67mm] (2)
0.118 [3.00mm] (11)
0.118 [3.00mm] (33)
0.120 [3.05mm] (17)
0.123 [3.12mm] (7)
0.125 [3.18mm] (438)
0.126 [3.20mm] (6)
0.127 [3.23mm] (3)
0.138 [3.50mm] (3)
0.150 [3.81mm] (2)
0.156 [3.96mm] (10)
0.157 [3.98mm] (1)
0.157 [3.99mm] (9)
0.157 [4.00mm] (21)
0.158 [4.00mm] (11)
0.167 [4.24mm] (22)
0.178 [4.52mm] (7)
0.187 [4.75mm] (20)
0.188 [4.78mm] (9)
0.190 [4.83mm] (5)
0.196 [4.98mm] (2)
0.196 [4.98mm] (1)
0.197 [5.00mm] (11)
0.197 [5.00mm] (8)
0.197 [5.00mm] (4)
0.200 [5.08mm] (2)
0.210 [5.33mm] (20)
0.218 [5.53mm] (1)
0.235 [5.98mm] (1)
0.236 [6.00mm] (9)
0.250 [6.35mm] (70)
0.311 [7.90mm] (1)
0.312 [7.92mm] (21)
0.314 [7.98mm] (1)
0.315 [8.00mm] (1)
0.315 [8.00mm] (7)
0.375 [9.53mm] (25)
0.393 [9.97mm] (1)
0.394 [10.00mm] (4)
0.400 [10.16mm] (2)
0.492 [12.50mm] (2)
0.500 [12.70mm] (23)
0.591 [15.00mm] (1)
0.600 [15.24mm] (2)
0.625 [15.88mm] (14)
0.630 [16.00mm] (1)
0.750 [19.05mm] (8)
0.787 [20.00mm] (2)
0.806 [20.47mm] (2)
0.945 [24.00mm] (1)
0.984 [25.00mm] (1)
1.000 [25.40mm] (8)
1.260 [32.00mm] (1)
1.378 [35.00mm] (1)
1.772 [45.00mm] (1)

Cutting Dia. Max.

0.001 [0.03mm] (1)
0.236 [6.00mm] (4)
0.312 [7.92mm] (1)
0.315 [8.00mm] (4)
0.375 [9.53mm] (3)
0.394 [10.00mm] (3)
0.394 [10.01mm] (2)
0.438 [11.13mm] (3)
0.472 [12.00mm] (3)
0.490 [12.45mm] (1)
0.500 [12.70mm] (7)
0.516 [13.10mm] (1)
0.520 [13.21mm] (1)
0.531 [13.49mm] (1)
0.539 [13.70mm] (1)
0.555 [14.10mm] (1)
0.618 [15.70mm] (1)
0.625 [15.88mm] (23)
0.630 [16.00mm] (8)
0.642 [16.30mm] (1)
0.655 [16.64mm] (1)
0.670 [17.02mm] (1)
0.690 [17.52mm] (1)
0.697 [17.70mm] (1)
0.732 [18.60mm] (1)
0.750 [19.05mm] (31)
0.784 [19.90mm] (1)
0.787 [20.00mm] (9)
0.843 [21.40mm] (1)
0.875 [22.23mm] (8)
0.941 [23.90mm] (1)
0.945 [24.00mm] (2)
0.950 [24.13mm] (1)
0.984 [25.00mm] (24)
1.000 [25.40mm] (56)
1.032 [26.20mm] (1)
1.039 [26.40mm] (1)
1.042 [26.47mm] (1)
1.123 [28.52mm] (1)
1.130 [28.70mm] (1)
1.138 [28.90mm] (1)
1.181 [30.00mm] (5)
1.184 [30.07mm] (1)
1.189 [30.20mm] (1)
1.220 [30.99mm] (1)
1.221 [31.00mm] (1)
1.250 [31.75mm] (60)
1.256 [31.90mm] (1)
1.260 [32.00mm] (23)
1.297 [32.94mm] (1)
1.378 [35.00mm] (6)
1.380 [35.05mm] (1)
1.408 [35.76mm] (1)
1.413 [35.90mm] (3)
1.417 [36.00mm] (1)
1.453 [36.90mm] (1)
1.500 [38.10mm] (65)
1.546 [39.27mm] (1)
1.560 [39.62mm] (1)
1.575 [40.00mm] (15)
1.591 [40.40mm] (1)
1.614 [41.00mm] (1)
1.630 [41.40mm] (3)
1.641 [41.68mm] (1)
1.645 [41.78mm] (1)
1.650 [41.91mm] (1)
1.654 [42.00mm] (7)
1.658 [42.10mm] (1)
1.693 [43.00mm] (1)
1.710 [43.43mm] (1)
1.728 [43.90mm] (3)
1.787 [45.40mm] (1)
1.827 [46.41mm] (1)
1.882 [47.80mm] (1)
1.900 [48.26mm] (1)
1.902 [48.30mm] (1)
1.930 [49.02mm] (2)
1.969 [50.00mm] (18)
2.000 [50.80mm] (46)
2.004 [50.90mm] (1)
2.008 [51.00mm] (4)
2.015 [51.18mm] (1)
2.016 [51.20mm] (1)
2.024 [51.40mm] (5)
2.025 [51.44mm] (1)
2.047 [52.00mm] (11)
2.055 [52.20mm] (6)
2.058 [52.27mm] (2)
2.109 [53.57mm] (1)
2.118 [53.80mm] (1)
2.120 [53.85mm] (1)
2.122 [53.90mm] (2)
2.130 [54.10mm] (1)
2.145 [54.48mm] (1)
2.170 [55.12mm] (1)
2.181 [55.40mm] (2)
2.210 [56.13mm] (2)
2.270 [57.66mm] (1)
2.284 [58.01mm] (1)
2.287 [58.10mm] (1)
2.290 [58.17mm] (1)
2.295 [58.30mm] (2)
2.300 [58.42mm] (3)
2.327 [59.11mm] (2)
2.383 [60.53mm] (2)
2.398 [60.90mm] (2)
2.400 [60.96mm] (2)
2.402 [61.00mm] (2)
2.430 [61.72mm] (2)
2.441 [62.00mm] (2)
2.445 [62.10mm] (1)
2.480 [63.00mm] (16)
2.488 [63.20mm] (1)
2.490 [63.25mm] (1)
2.500 [63.50mm] (38)
2.520 [64.00mm] (2)
2.523 [64.08mm] (1)
2.528 [64.20mm] (1)
2.530 [64.26mm] (1)
2.535 [64.40mm] (3)
2.539 [64.50mm] (2)
2.555 [64.90mm] (6)
2.558 [64.97mm] (1)
2.570 [65.28mm] (2)
2.579 [65.50mm] (2)
2.598 [66.00mm] (7)
2.607 [66.22mm] (1)
2.610 [66.29mm] (2)
2.634 [66.90mm] (2)
2.640 [67.06mm] (1)
2.642 [67.11mm] (3)
2.645 [67.18mm] (1)
2.693 [68.40mm] (2)
2.710 [68.83mm] (2)
2.750 [69.85mm] (1)
2.768 [70.30mm] (1)
2.783 [70.69mm] (1)
2.790 [70.87mm] (1)
2.800 [71.12mm] (2)
2.807 [71.30mm] (2)
2.827 [71.81mm] (1)
2.886 [73.30mm] (2)
2.900 [73.66mm] (1)
2.909 [73.90mm] (2)
2.913 [74.00mm] (2)
2.930 [74.42mm] (2)
2.953 [75.00mm] (2)
3.000 [76.20mm] (50)
3.012 [76.50mm] (1)
3.016 [76.60mm] (1)
3.021 [76.73mm] (2)
3.025 [76.84mm] (2)
3.030 [76.96mm] (1)
3.040 [77.22mm] (2)
3.051 [77.50mm] (2)
3.051 [77.50mm] (4)
3.055 [77.60mm] (6)
3.070 [77.98mm] (1)
3.082 [78.28mm] (1)
3.091 [78.50mm] (2)
3.100 [78.74mm] (1)
3.110 [78.99mm] (3)
3.140 [79.76mm] (1)
3.145 [79.88mm] (1)
3.150 [80.00mm] (22)
3.173 [80.60mm] (1)
3.177 [80.70mm] (1)
3.189 [81.00mm] (2)
3.190 [81.03mm] (1)
3.197 [81.20mm] (2)
3.205 [81.40mm] (9)
3.210 [81.53mm] (2)
3.283 [83.39mm] (1)
3.290 [83.57mm] (1)
3.300 [83.82mm] (2)
3.303 [83.90mm] (2)
3.327 [84.51mm] (2)
3.347 [85.00mm] (1)
3.362 [85.40mm] (2)
3.388 [86.06mm] (2)
3.400 [86.36mm] (1)
3.430 [87.12mm] (2)
3.440 [87.38mm] (1)
3.476 [88.30mm] (2)
3.484 [88.50mm] (1)
3.490 [88.65mm] (1)
3.530 [89.66mm] (4)
3.540 [89.92mm] (1)
3.543 [90.00mm] (1)
3.570 [90.68mm] (2)
3.579 [90.90mm] (2)
3.583 [91.00mm] (2)
3.610 [91.69mm] (2)
3.621 [91.97mm] (1)
3.622 [92.00mm] (2)
3.639 [92.43mm] (1)
3.660 [92.96mm] (2)
3.677 [93.40mm] (1)
3.680 [93.47mm] (2)
3.681 [93.50mm] (1)
3.685 [93.60mm] (1)
3.690 [93.73mm] (1)
3.693 [93.80mm] (1)
3.717 [94.40mm] (1)
3.721 [94.50mm] (4)
3.730 [94.74mm] (3)
3.750 [95.25mm] (2)
3.760 [95.50mm] (2)
3.843 [97.60mm] (1)
3.937 [100.00mm] (10)
3.976 [101.00mm] (2)
3.984 [101.20mm] (2)
3.992 [101.40mm] (5)
4.000 [101.60mm] (47)
4.020 [102.11mm] (2)
4.034 [102.46mm] (1)
4.035 [102.49mm] (1)
4.051 [102.90mm] (2)
4.055 [103.00mm] (4)
4.100 [104.14mm] (1)
4.110 [104.39mm] (1)
4.150 [105.40mm] (3)
4.210 [106.93mm] (2)
4.213 [107.00mm] (1)
4.264 [108.30mm] (2)
4.283 [108.79mm] (1)
4.290 [108.97mm] (1)
4.300 [109.22mm] (2)
4.305 [109.35mm] (1)
4.327 [109.91mm] (2)
4.331 [110.00mm] (1)
4.350 [110.49mm] (1)
4.366 [110.90mm] (2)
4.367 [110.92mm] (1)
4.370 [111.00mm] (2)
4.389 [111.48mm] (2)
4.409 [112.00mm] (2)
4.429 [112.50mm] (1)
4.430 [112.52mm] (2)
4.440 [112.78mm] (2)
4.469 [113.50mm] (1)
4.472 [113.60mm] (1)
4.476 [113.70mm] (1)
4.480 [113.79mm] (1)
4.508 [114.50mm] (4)
4.527 [114.99mm] (2)
4.530 [115.06mm] (2)
4.540 [115.32mm] (1)
4.547 [115.50mm] (2)
4.570 [116.08mm] (2)
4.610 [117.09mm] (2)
4.626 [117.50mm] (1)
4.644 [117.96mm] (1)
4.670 [118.62mm] (2)
4.680 [118.87mm] (2)
4.690 [119.13mm] (4)
4.730 [120.14mm] (3)
4.750 [120.65mm] (2)
4.900 [124.46mm] (1)
4.921 [125.00mm] (8)
4.961 [126.00mm] (2)
4.969 [126.20mm] (2)
4.972 [126.30mm] (1)
4.976 [126.40mm] (6)
5.000 [127.00mm] (25)
5.018 [127.46mm] (2)
5.052 [128.32mm] (2)
5.055 [128.40mm] (4)
5.070 [128.78mm] (1)
5.110 [129.79mm] (1)
5.134 [130.40mm] (2)
5.197 [132.00mm] (1)
5.210 [132.33mm] (1)
5.248 [133.30mm] (2)
5.250 [133.35mm] (1)
5.305 [134.75mm] (1)
5.327 [135.31mm] (1)
5.350 [135.90mm] (2)
5.354 [136.00mm] (2)
5.390 [136.91mm] (2)
5.394 [137.00mm] (2)
5.430 [137.92mm] (2)
5.440 [138.18mm] (1)
5.457 [138.60mm] (2)
5.492 [139.50mm] (4)
5.524 [140.31mm] (2)
5.530 [140.46mm] (1)
5.532 [140.50mm] (2)
5.540 [140.72mm] (1)
5.570 [141.48mm] (1)
5.610 [142.49mm] (2)
5.610 [142.50mm] (1)
5.636 [143.15mm] (1)
5.690 [144.53mm] (3)
5.720 [145.29mm] (2)
5.730 [145.54mm] (1)
6.000 [152.40mm] (26)
6.016 [152.81mm] (2)
6.051 [153.70mm] (2)
6.055 [153.80mm] (4)
6.110 [155.19mm] (1)
6.210 [157.73mm] (1)
6.260 [159.00mm] (1)
6.299 [160.00mm] (8)
6.300 [160.02mm] (2)
6.327 [160.71mm] (2)
6.343 [161.10mm] (2)
6.350 [161.30mm] (1)
6.354 [161.40mm] (6)
6.390 [162.31mm] (2)
6.430 [163.32mm] (2)
6.440 [163.58mm] (3)
6.480 [164.59mm] (1)
6.516 [165.50mm] (2)
6.522 [165.66mm] (2)
6.530 [165.86mm] (1)
6.540 [166.12mm] (1)
6.570 [166.88mm] (2)
6.575 [167.00mm] (1)
6.610 [167.89mm] (2)
6.626 [168.30mm] (2)
6.635 [168.53mm] (1)
6.652 [168.96mm] (1)
6.670 [169.42mm] (2)
6.678 [169.62mm] (1)
6.680 [169.67mm] (2)
6.681 [169.70mm] (1)
6.690 [169.93mm] (1)
6.700 [170.18mm] (5)
6.728 [170.90mm] (2)
6.732 [171.00mm] (2)
6.740 [171.20mm] (1)
6.772 [172.00mm] (2)
6.835 [173.60mm] (2)
6.870 [174.50mm] (3)
6.900 [175.26mm] (1)
6.909 [175.50mm] (2)
7.000 [177.80mm] (1)
7.055 [179.20mm] (2)
7.070 [179.58mm] (1)
7.874 [200.00mm] (3)
7.917 [201.10mm] (2)
7.925 [201.30mm] (1)
7.929 [201.40mm] (6)
8.000 [203.20mm] (10)
8.016 [203.61mm] (2)
8.055 [204.60mm] (4)
8.150 [207.00mm] (1)
8.210 [208.53mm] (1)
8.250 [209.55mm] (1)
8.268 [210.00mm] (1)
8.268 [210.01mm] (1)
8.409 [213.60mm] (2)
8.440 [214.38mm] (3)
8.445 [214.50mm] (2)
8.449 [214.60mm] (2)
8.484 [215.50mm] (2)
8.500 [215.90mm] (1)
8.519 [216.38mm] (2)
8.530 [216.66mm] (2)
8.540 [216.91mm] (1)
8.610 [218.69mm] (2)
8.659 [219.93mm] (1)
8.670 [220.22mm] (3)
8.700 [220.98mm] (3)
8.740 [222.00mm] (2)
8.825 [224.16mm] (2)
8.900 [226.06mm] (1)
9.070 [230.38mm] (1)
9.843 [250.00mm] (4)
9.894 [251.30mm] (1)
9.898 [251.40mm] (6)
10.000 [254.00mm] (7)
10.055 [255.40mm] (4)
10.118 [257.00mm] (1)
10.236 [260.00mm] (1)
10.250 [260.35mm] (1)
10.268 [260.81mm] (1)
10.370 [263.40mm] (1)
10.378 [263.60mm] (1)
10.413 [264.50mm] (2)
10.417 [264.60mm] (1)
10.440 [265.18mm] (2)
10.500 [266.70mm] (1)
10.525 [267.34mm] (2)
10.530 [267.46mm] (2)
10.540 [267.71mm] (1)
10.661 [270.79mm] (2)
10.670 [271.02mm] (4)
10.700 [271.78mm] (3)
10.740 [272.80mm] (1)
10.900 [276.86mm] (1)
11.070 [281.18mm] (1)
12.000 [304.80mm] (2)
12.250 [311.15mm] (1)
12.267 [311.58mm] (1)
12.440 [315.98mm] (1)
12.453 [316.30mm] (1)
12.457 [316.40mm] (4)
12.530 [318.26mm] (2)
12.540 [318.51mm] (1)
12.663 [321.64mm] (2)
12.670 [321.82mm] (4)
12.700 [322.58mm] (3)
12.740 [323.60mm] (1)
12.750 [323.85mm] (1)
12.795 [325.00mm] (1)
12.900 [327.66mm] (1)
12.933 [328.50mm] (1)
12.937 [328.60mm] (1)
13.070 [331.98mm] (1)
14.663 [372.44mm] (2)
14.670 [372.62mm] (3)
15.803 [401.40mm] (4)
25.000 [635.00mm] (1)
200.000 [5080.00mm] (1)

Depth of Cut Max.

0.002 [0.05mm] (1)
0.005 [0.13mm] (1)
0.008 [0.20mm] (4)
0.011 [0.28mm] (1)
0.012 [0.30mm] (23)
0.015 [0.38mm] (1)
0.016 [0.41mm] (8)
0.018 [0.46mm] (2)
0.020 [0.51mm] (57)
0.023 [0.58mm] (11)
0.024 [0.61mm] (11)
0.026 [0.66mm] (2)
0.027 [0.69mm] (3)
0.028 [0.71mm] (13)
0.031 [0.79mm] (12)
0.032 [0.81mm] (6)
0.033 [0.84mm] (1)
0.035 [0.89mm] (2)
0.037 [0.94mm] (1)
0.039 [0.99mm] (63)
0.040 [1.02mm] (34)
0.041 [1.04mm] (1)
0.043 [1.09mm] (18)
0.047 [1.19mm] (7)
0.047 [1.20mm] (6)
0.049 [1.24mm] (1)
0.050 [1.27mm] (1)
0.055 [1.40mm] (1)
0.056 [1.42mm] (1)
0.058 [1.47mm] (8)
0.059 [1.50mm] (23)
0.059 [1.50mm] (1)
0.060 [1.52mm] (61)
0.061 [1.55mm] (1)
0.063 [1.60mm] (8)
0.065 [1.65mm] (6)
0.067 [1.70mm] (1)
0.068 [1.73mm] (1)
0.069 [1.75mm] (2)
0.070 [1.78mm] (5)
0.071 [1.80mm] (4)
0.075 [1.90mm] (1)
0.075 [1.91mm] (7)
0.078 [1.98mm] (27)
0.079 [2.00mm] (2)
0.079 [2.01mm] (37)
0.087 [2.21mm] (4)
0.088 [2.24mm] (20)
0.090 [2.29mm] (7)
0.091 [2.31mm] (2)
0.094 [2.39mm] (4)
0.098 [2.49mm] (13)
0.100 [2.54mm] (5)
0.104 [2.65mm] (5)
0.106 [2.69mm] (6)
0.107 [2.72mm] (8)
0.110 [2.79mm] (13)
0.110 [2.80mm] (11)
0.114 [2.90mm] (1)
0.115 [2.92mm] (1)
0.118 [3.00mm] (28)
0.118 [3.00mm] (3)
0.120 [3.05mm] (30)
0.125 [3.18mm] (14)
0.126 [3.20mm] (3)
0.128 [3.25mm] (7)
0.130 [3.30mm] (19)
0.134 [3.40mm] (2)
0.138 [3.51mm] (27)
0.140 [3.56mm] (17)
0.142 [3.60mm] (1)
0.146 [3.71mm] (1)
0.147 [3.73mm] (14)
0.148 [3.76mm] (5)
0.150 [3.80mm] (14)
0.150 [3.81mm] (56)
0.154 [3.91mm] (1)
0.157 [3.99mm] (37)
0.160 [4.06mm] (14)
0.161 [4.09mm] (1)
0.165 [4.19mm] (28)
0.169 [4.29mm] (1)
0.169 [4.30mm] (3)
0.175 [4.45mm] (2)
0.177 [4.50mm] (6)
0.177 [4.50mm] (24)
0.180 [4.57mm] (41)
0.181 [4.60mm] (1)
0.185 [4.70mm] (26)
0.187 [4.75mm] (5)
0.188 [4.78mm] (4)
0.189 [4.80mm] (14)
0.190 [4.83mm] (33)
0.197 [5.00mm] (105)
0.200 [5.08mm] (72)
0.201 [5.11mm] (3)
0.210 [5.33mm] (9)
0.213 [5.41mm] (2)
0.217 [5.50mm] (6)
0.217 [5.51mm] (3)
0.220 [5.59mm] (46)
0.224 [5.69mm] (32)
0.224 [5.70mm] (1)
0.227 [5.77mm] (1)
0.228 [5.79mm] (17)
0.230 [5.84mm] (45)
0.232 [5.89mm] (2)
0.232 [5.90mm] (3)
0.235 [5.97mm] (24)
0.236 [5.99mm] (201)
0.236 [6.00mm] (4)
0.240 [6.10mm] (31)
0.244 [6.20mm] (24)
0.250 [6.35mm] (47)
0.252 [6.40mm] (1)
0.256 [6.50mm] (1)
0.260 [6.60mm] (1)
0.270 [6.86mm] (54)
0.272 [6.91mm] (1)
0.275 [6.99mm] (22)
0.276 [7.01mm] (72)
0.280 [7.11mm] (4)
0.283 [7.19mm] (2)
0.285 [7.24mm] (1)
0.291 [7.39mm] (3)
0.295 [7.49mm] (6)
0.295 [7.50mm] (1)
0.300 [7.62mm] (1)
0.306 [7.77mm] (6)
0.307 [7.80mm] (1)
0.310 [7.87mm] (54)
0.311 [7.90mm] (1)
0.312 [7.92mm] (1)
0.313 [7.95mm] (3)
0.315 [8.00mm] (71)
0.317 [8.05mm] (27)
0.320 [8.13mm] (23)
0.327 [8.31mm] (10)
0.330 [8.38mm] (19)
0.331 [8.41mm] (5)
0.335 [8.51mm] (6)
0.338 [8.59mm] (1)
0.340 [8.64mm] (3)
0.350 [8.89mm] (46)
0.354 [8.99mm] (85)
0.362 [9.19mm] (19)
0.365 [9.27mm] (1)
0.366 [9.30mm] (1)
0.370 [9.40mm] (37)
0.374 [9.50mm] (3)
0.375 [9.53mm] (49)
0.380 [9.65mm] (3)
0.385 [9.78mm] (22)
0.390 [9.91mm] (57)
0.394 [10.00mm] (4)
0.394 [10.01mm] (31)
0.400 [10.16mm] (8)
0.406 [10.31mm] (1)
0.410 [10.41mm] (55)
0.413 [10.49mm] (14)
0.414 [10.52mm] (1)
0.420 [10.67mm] (21)
0.421 [10.69mm] (1)
0.425 [10.80mm] (2)
0.429 [10.90mm] (1)
0.430 [10.92mm] (72)
0.433 [11.00mm] (52)
0.433 [11.00mm] (7)
0.437 [11.10mm] (18)
0.440 [11.18mm] (6)
0.445 [11.30mm] (1)
0.449 [11.40mm] (12)
0.450 [11.43mm] (12)
0.453 [11.50mm] (1)
0.457 [11.61mm] (1)
0.460 [11.68mm] (5)
0.469 [11.91mm] (4)
0.470 [11.94mm] (69)
0.472 [11.99mm] (103)
0.479 [12.17mm] (12)
0.480 [12.19mm] (3)
0.484 [12.29mm] (9)
0.487 [12.37mm] (1)
0.488 [12.40mm] (2)
0.492 [12.50mm] (1)
0.500 [12.70mm] (244)
0.507 [12.88mm] (1)
0.510 [12.95mm] (23)
0.512 [13.00mm] (5)
0.530 [13.46mm] (7)
0.531 [13.49mm] (4)
0.540 [13.72mm] (22)
0.543 [13.79mm] (9)
0.550 [13.97mm] (4)
0.551 [14.00mm] (14)
0.559 [14.20mm] (2)
0.561 [14.25mm] (2)
0.562 [14.27mm] (6)
0.563 [14.30mm] (5)
0.566 [14.37mm] (1)
0.570 [14.48mm] (14)
0.575 [14.61mm] (2)
0.587 [14.91mm] (2)
0.590 [14.99mm] (23)
0.591 [15.00mm] (11)
0.591 [15.01mm] (57)
0.599 [15.21mm] (3)
0.600 [15.24mm] (7)
0.610 [15.49mm] (23)
0.620 [15.75mm] (22)
0.625 [15.88mm] (108)
0.630 [16.00mm] (114)
0.650 [16.51mm] (4)
0.656 [16.66mm] (1)
0.660 [16.76mm] (7)
0.665 [16.89mm] (4)
0.669 [16.99mm] (2)
0.675 [17.15mm] (1)
0.680 [17.27mm] (21)
0.681 [17.30mm] (1)
0.687 [17.45mm] (4)
0.690 [17.52mm] (3)
0.701 [17.81mm] (1)
0.709 [18.00mm] (4)
0.709 [18.01mm] (32)
0.710 [18.03mm] (2)
0.720 [18.29mm] (1)
0.740 [18.80mm] (1)
0.748 [19.00mm] (3)
0.750 [19.05mm] (225)
0.758 [19.25mm] (1)
0.761 [19.33mm] (5)
0.762 [19.35mm] (1)
0.770 [19.56mm] (1)
0.778 [19.76mm] (1)
0.780 [19.81mm] (2)
0.787 [19.99mm] (21)
0.810 [20.57mm] (7)
0.813 [20.65mm] (4)
0.815 [20.70mm] (1)
0.816 [20.72mm] (4)
0.820 [20.83mm] (14)
0.827 [21.01mm] (2)
0.830 [21.08mm] (15)
0.839 [21.31mm] (2)
0.847 [21.50mm] (11)
0.850 [21.59mm] (1)
0.858 [21.79mm] (1)
0.860 [21.84mm] (4)
0.866 [22.00mm] (34)
0.870 [22.10mm] (9)
0.875 [22.23mm] (268)
0.880 [22.35mm] (8)
0.900 [22.86mm] (6)
0.915 [23.24mm] (1)
0.920 [23.37mm] (2)
0.930 [23.62mm] (1)
0.933 [23.70mm] (1)
0.938 [23.83mm] (8)
0.940 [23.88mm] (5)
0.945 [24.00mm] (43)
0.961 [24.41mm] (1)
0.969 [24.61mm] (1)
0.970 [24.64mm] (3)
0.984 [24.99mm] (7)
0.990 [25.15mm] (5)
1.000 [25.40mm] (496)
1.010 [25.65mm] (1)
1.015 [25.78mm] (1)
1.020 [25.91mm] (2)
1.024 [26.01mm] (16)
1.040 [26.42mm] (7)
1.041 [26.44mm] (1)
1.063 [27.00mm] (11)
1.070 [27.18mm] (4)
1.080 [27.43mm] (4)
1.100 [27.94mm] (4)
1.102 [27.99mm] (3)
1.120 [28.45mm] (3)
1.125 [28.58mm] (8)
1.140 [28.95mm] (3)
1.150 [29.21mm] (1)
1.181 [30.00mm] (30)
1.181 [30.00mm] (5)
1.189 [30.20mm] (1)
1.190 [30.23mm] (1)
1.200 [30.48mm] (12)
1.210 [30.73mm] (1)
1.250 [31.75mm] (333)
1.260 [32.00mm] (15)
1.270 [32.26mm] (1)
1.280 [32.51mm] (1)
1.290 [32.77mm] (4)
1.300 [33.02mm] (1)
1.335 [33.91mm] (1)
1.339 [34.01mm] (13)
1.350 [34.29mm] (5)
1.368 [34.75mm] (1)
1.369 [34.77mm] (1)
1.375 [34.93mm] (5)
1.378 [35.00mm] (11)
1.380 [35.05mm] (5)
1.400 [35.56mm] (3)
1.410 [35.81mm] (3)
1.417 [35.99mm] (2)
1.457 [37.01mm] (4)
1.496 [38.00mm] (22)
1.500 [38.10mm] (365)
1.506 [38.25mm] (1)
1.510 [38.35mm] (3)
1.512 [38.40mm] (2)
1.515 [38.48mm] (1)
1.530 [38.86mm] (4)
1.535 [38.99mm] (8)
1.540 [39.12mm] (1)
1.555 [39.50mm] (5)
1.560 [39.62mm] (6)
1.575 [40.01mm] (14)
1.580 [40.13mm] (1)
1.600 [40.64mm] (3)
1.625 [41.28mm] (148)
1.654 [42.01mm] (9)
1.670 [42.42mm] (3)
1.673 [42.49mm] (1)
1.680 [42.67mm] (2)
1.690 [42.93mm] (1)
1.696 [43.08mm] (1)
1.700 [43.18mm] (3)
1.710 [43.43mm] (1)
1.730 [43.94mm] (1)
1.750 [44.45mm] (28)
1.760 [44.70mm] (1)
1.772 [45.01mm] (2)
1.811 [46.00mm] (7)
1.870 [47.50mm] (8)
1.880 [47.75mm] (1)
1.890 [48.01mm] (1)
1.900 [48.26mm] (6)
1.969 [50.01mm] (6)
1.971 [50.06mm] (2)
2.000 [50.80mm] (152)
2.010 [51.05mm] (4)
2.015 [51.18mm] (2)
2.019 [51.28mm] (2)
2.020 [51.31mm] (2)
2.047 [51.99mm] (2)
2.060 [52.32mm] (5)
2.062 [52.37mm] (1)
2.067 [52.50mm] (3)
2.100 [53.34mm] (4)
2.110 [53.59mm] (1)
2.125 [53.98mm] (4)
2.160 [54.86mm] (3)
2.200 [55.88mm] (5)
2.205 [56.01mm] (2)
2.250 [57.15mm] (126)
2.260 [57.40mm] (1)
2.270 [57.66mm] (2)
2.290 [58.17mm] (2)
2.323 [59.00mm] (2)
2.350 [59.69mm] (1)
2.410 [61.21mm] (3)
2.430 [61.72mm] (2)
2.431 [61.75mm] (1)
2.440 [61.98mm] (1)
2.450 [62.23mm] (5)
2.500 [63.50mm] (119)
2.520 [64.01mm] (1)
2.530 [64.26mm] (3)
2.570 [65.28mm] (1)
2.580 [65.53mm] (2)
2.598 [65.99mm] (1)
2.600 [66.04mm] (3)
2.620 [66.55mm] (6)
2.625 [66.68mm] (12)
2.650 [67.31mm] (1)
2.660 [67.56mm] (1)
2.670 [67.82mm] (1)
2.672 [67.87mm] (1)
2.700 [68.58mm] (2)
2.800 [71.12mm] (2)
2.820 [71.63mm] (1)
2.840 [72.14mm] (3)
2.886 [73.30mm] (2)
2.889 [73.38mm] (1)
2.890 [73.41mm] (2)
2.913 [73.99mm] (2)
2.920 [74.17mm] (1)
2.992 [76.00mm] (2)
2.997 [76.12mm] (1)
3.000 [76.20mm] (125)
3.020 [76.71mm] (1)
3.040 [77.22mm] (1)
3.060 [77.72mm] (1)
3.125 [79.38mm] (44)
3.150 [80.01mm] (1)
3.230 [82.04mm] (1)
3.232 [82.09mm] (1)
3.250 [82.55mm] (84)
3.290 [83.57mm] (1)
3.325 [84.46mm] (1)
3.340 [84.84mm] (2)
3.348 [85.04mm] (3)
3.350 [85.09mm] (2)
3.465 [88.01mm] (3)
3.466 [88.04mm] (2)
3.470 [88.14mm] (2)
3.490 [88.65mm] (2)
3.620 [91.95mm] (2)
3.622 [92.00mm] (1)
3.800 [96.52mm] (1)
3.806 [96.67mm] (1)
3.807 [96.70mm] (2)
3.900 [99.06mm] (2)
4.000 [101.60mm] (44)
4.010 [101.85mm] (2)
4.013 [101.93mm] (1)
4.015 [101.98mm] (2)
4.030 [102.36mm] (2)
4.040 [102.62mm] (1)
4.080 [103.63mm] (6)
4.125 [104.78mm] (68)
4.160 [105.66mm] (2)
4.262 [108.25mm] (4)
4.300 [109.22mm] (1)
4.390 [111.51mm] (1)
4.400 [111.76mm] (2)
5.000 [127.00mm] (10)
5.965 [151.51mm] (1)
6.099 [154.91mm] (1)
6.100 [154.94mm] (1)
11.000 [279.40mm] (1)
12.480 [316.99mm] (17)
12.520 [318.01mm] (1)

Overall Length

0.375 [9.53mm] (1)
0.661 [16.80mm] (1)
0.892 [22.66mm] (1)
0.898 [22.80mm] (2)
0.931 [23.65mm] (1)
0.963 [24.46mm] (4)
0.976 [24.80mm] (2)
1.061 [26.95mm] (1)
1.217 [30.90mm] (1)
1.240 [31.50mm] (2)
1.260 [32.00mm] (1)
1.289 [32.74mm] (1)
1.290 [32.77mm] (3)
1.321 [33.55mm] (1)
1.417 [36.00mm] (1)
1.476 [37.50mm] (1)
1.492 [37.90mm] (2)
1.500 [38.10mm] (23)
1.543 [39.19mm] (8)
1.567 [39.80mm] (1)
1.571 [39.90mm] (1)
1.575 [40.00mm] (3)
1.595 [40.50mm] (2)
1.606 [40.80mm] (1)
1.693 [43.00mm] (1)
1.693 [43.00mm] (2)
1.701 [43.21mm] (2)
1.750 [44.45mm] (9)
1.772 [45.00mm] (38)
1.780 [45.21mm] (3)
1.850 [47.00mm] (1)
1.929 [49.00mm] (2)
1.933 [49.10mm] (2)
1.943 [49.35mm] (1)
1.953 [49.61mm] (1)
1.961 [49.80mm] (1)
1.969 [50.00mm] (24)
2.000 [50.80mm] (153)
2.047 [52.00mm] (3)
2.100 [53.34mm] (3)
2.158 [54.80mm] (1)
2.165 [55.00mm] (13)
2.200 [55.88mm] (1)
2.241 [56.92mm] (1)
2.244 [57.00mm] (66)
2.250 [57.15mm] (6)
2.280 [57.91mm] (5)
2.284 [58.00mm] (1)
2.350 [59.69mm] (6)
2.360 [59.94mm] (1)
2.362 [60.00mm] (17)
2.366 [60.10mm] (5)
2.436 [61.87mm] (1)
2.445 [62.10mm] (2)
2.480 [63.00mm] (34)
2.500 [63.50mm] (291)
2.515 [63.88mm] (1)
2.520 [64.00mm] (1)
2.559 [65.00mm] (12)
2.595 [65.90mm] (2)
2.598 [66.00mm] (5)
2.638 [67.00mm] (17)
2.640 [67.06mm] (1)
2.660 [67.56mm] (3)
2.677 [68.00mm] (11)
2.690 [68.33mm] (2)
2.695 [68.45mm] (9)
2.700 [68.58mm] (5)
2.750 [69.85mm] (46)
2.756 [70.00mm] (12)
2.780 [70.61mm] (2)
2.835 [72.00mm] (31)
2.872 [72.95mm] (5)
2.874 [73.00mm] (7)
2.920 [74.17mm] (1)
2.953 [75.00mm] (5)
2.992 [76.00mm] (3)
3.000 [76.20mm] (525)
3.071 [78.00mm] (1)
3.110 [79.00mm] (2)
3.150 [80.00mm] (31)
3.228 [82.00mm] (4)
3.250 [82.55mm] (23)
3.268 [83.00mm] (38)
3.280 [83.31mm] (1)
3.347 [85.00mm] (10)
3.375 [85.73mm] (3)
3.410 [86.61mm] (1)
3.500 [88.90mm] (166)
3.543 [90.00mm] (20)
3.622 [92.00mm] (37)
3.661 [93.00mm] (2)
3.740 [95.00mm] (4)
3.750 [95.25mm] (41)
3.840 [97.54mm] (2)
3.937 [100.00mm] (68)
3.940 [100.08mm] (2)
4.000 [101.60mm] (790)
4.095 [104.00mm] (13)
4.134 [105.00mm] (3)
4.170 [105.92mm] (1)
4.190 [106.43mm] (1)
4.213 [107.00mm] (3)
4.250 [107.95mm] (11)
4.270 [108.46mm] (1)
4.291 [109.00mm] (1)
4.331 [110.00mm] (38)
4.410 [112.01mm] (2)
4.500 [114.30mm] (144)
4.528 [115.00mm] (8)
4.560 [115.82mm] (1)
4.700 [119.38mm] (2)
4.720 [119.89mm] (1)
4.724 [120.00mm] (1)
4.750 [120.65mm] (10)
4.764 [121.00mm] (5)
4.910 [124.71mm] (1)
4.921 [125.00mm] (6)
5.000 [127.00mm] (559)
5.039 [128.00mm] (13)
5.050 [128.27mm] (1)
5.118 [130.00mm] (13)
5.120 [130.05mm] (1)
5.158 [131.00mm] (1)
5.250 [133.35mm] (7)
5.410 [137.41mm] (2)
5.500 [139.70mm] (21)
5.512 [140.00mm] (8)
5.512 [140.00mm] (1)
5.562 [141.27mm] (2)
5.570 [141.48mm] (3)
5.620 [142.75mm] (1)
5.709 [145.00mm] (3)
5.750 [146.05mm] (5)
5.866 [149.00mm] (1)
5.900 [149.86mm] (3)
5.906 [150.00mm] (15)
6.000 [152.40mm] (540)
6.142 [156.00mm] (1)
6.226 [158.14mm] (1)
6.250 [158.75mm] (3)
6.299 [160.00mm] (3)
6.375 [161.93mm] (1)
6.500 [165.10mm] (17)
6.610 [167.89mm] (1)
6.750 [171.45mm] (6)
7.000 [177.80mm] (188)
7.087 [180.00mm] (1)
7.130 [181.10mm] (1)
7.200 [182.88mm] (6)
7.205 [183.00mm] (1)
7.284 [185.00mm] (8)
7.500 [190.50mm] (4)
7.677 [195.00mm] (1)
7.750 [196.85mm] (7)
7.874 [200.00mm] (4)
8.000 [203.20mm] (46)
8.250 [209.55mm] (3)
8.500 [215.90mm] (9)
8.660 [219.96mm] (1)
8.661 [220.00mm] (3)
9.000 [228.60mm] (5)
9.500 [241.30mm] (1)
10.000 [254.00mm] (27)
10.120 [257.05mm] (1)
10.250 [260.35mm] (2)
11.000 [279.40mm] (3)
11.810 [299.97mm] (1)
12.000 [304.80mm] (3)
57.000 [1447.80mm] (1)
100.000 [2540.00mm] (1)

Thread Pitch

550 (1)
560 (1)
570 (2)
610 (1)
650 (1)
750 (2)
770 (1)
830 (2)
869 (2)
930 (3)
960 (2)
980 (1)
1000 (3)
1220 (3)
1260 (5)
1380 (1)
1419 (2)
1460 (3)
1500 (2)
1570 (1)
1574 (2)
1600 (1)
1770 (2)
1830 (2)
1831 (1)
1850 (1)
1870 (3)
1968 (2)
1970 (6)
2340 (2)
2360 (5)
2500 (4)
2600 (2)
2640 (2)
2755 (1)
2760 (4)
2800 (1)
3030 (1)
3110 (1)
3120 (2)
3130 (1)
3149 (1)
3150 (1)
3540 (2)
3620 (3)
3700 (2)
3750 (3)
4130 (1)
4490 (1)
4720 (3)
5000 (3)
5910 (2)
6250 (6)
7500 (3)

Adaption Machine Side

3/8" Square (5)
9 x 12 mm (12)
BT40 Face Contact (1)
Bore .5000", KW .250" (29)
Bore .7500", Axial (3)
Bore .7500", KW .312" (223)
Bore 1.000", Axial (17)
Bore 1.000", Axial, 4 Pin BC (3)
Bore 1.000", KW .375" (232)
Bore 1.250", Axial (12)
Bore 1.250", Axial, 4 Pin BC (3)
Bore 1.250", KW .500" (33)
Bore 1.500", Axial (12)
Bore 1.500", Axial, 4 Pin BC (6)
Bore 1.500", KW .625" (299)
Bore 16 mm, KW 8.4 mm (51)
Bore 2.000", Axial (7)
Bore 2.000", KW .750" (6)
Bore 2.500", KW 1.000" (98)
Bore 22 mm, Axial (8)
Bore 22 mm, Axial, 4 Pin BC (8)
Bore 22 mm, KW 10.4 mm (160)
Bore 27 mm, Axial (1)
Bore 27 mm, KW 12.4 mm (95)
Bore 32 mm, KW 14.4 mm (61)
Bore 32 mm, Axial. 4 Pin BC (11)
Bore 40 mm, Axial, 4 Pin BC (5)
Bore 40 mm, KW 16.4 mm (75)
Bore 40 mm, KW 16.4 mm, BC (6)
Bore 60 mm, KW 25.7 mm, 101.6 BC (25)
Bridgeport R8 (3)
C3 (8)
C4 (12)
C5 (6)
C6 (4)
C8 (2)
CAT40 (3)
CAT50 (3)
Chip Surfer T05 (160)
Chip Surfer T06 (228)
Chip Surfer T08 (269)
Chip Surfer T10 (186)
Chip Surfer T12 (140)
Chip Surfer T15 (85)
Chip Surfer T21 (15)
Cylindrical .0625" (3)
Cylindrical .1250" (26)
Cylindrical .1563" (2)
Cylindrical .1875" (21)
Cylindrical .2188" (4)
Cylindrical .2500" (211)
Cylindrical .3125" (143)
Cylindrical .3750" (224)
Cylindrical .4375" (42)
Cylindrical .5000" (390)
Cylindrical .6250" (305)
Cylindrical .7500" (362)
Cylindrical .8750" (3)
Cylindrical 1.000" (340)
Cylindrical 1.250" (64)
Cylindrical 1.500" (17)
Cylindrical 10 mm (84)
Cylindrical 12 mm (102)
Cylindrical 14 mm (8)
Cylindrical 15.5 mm (2)
Cylindrical 16 mm (100)
Cylindrical 18 mm (1)
Cylindrical 18.5 mm (4)
Cylindrical 2.000" (1)
Cylindrical 20 mm (99)
Cylindrical 21.5 mm (2)
Cylindrical 25 mm (67)
Cylindrical 3 mm (3)
Cylindrical 32 mm (26)
Cylindrical 4 mm (63)
Cylindrical 40 mm (4)
Cylindrical 5 mm (6)
Cylindrical 6 mm (123)
Cylindrical 8 mm (70)
DIN69871-40 (5)
ER11 (2)
ER16 (7)
ER20 (10)
ER25 (13)
ER32 (21)
ER40 (1)
HSK A40 (10)
HSK A63 (22)
HSK A80 (3)
HSK F80/FM80 (4)
Hi-Tork 1.25" (1)
ICTC #40 (1)
ICTC #50 .125 Draw (15)
ICTC #50 Simo-Fit (1)
IT.TE.DI. 16 mm Bore (8)
IT.TE.DI. 22 mm Bore (34)
IT.TE.DI. 27 mm Bore (24)
IT.TE.DI. 32 mm Bore (21)
IT.TE.DI. 40 mm Bore (46)
IT.TE.DI. 60 mm Bore (46)
Multi-Surfer LP (17)
Multi-Surfer LQ (17)
Multi-Surfer LR (27)
TopOn M06 (28)
TopOn M08 (45)
TopOn M10 (73)
TopOn M12 (108)
TopOn M16 (218)
TopOn M20 (22)
TriLink PA14 (3)
TriLink PA19 (9)
TriLink PA24 (14)
Weldon .1250" (4)
Weldon .1875" (4)
Weldon .2500" (99)
Weldon .3125" (73)
Weldon .3750" (142)
Weldon .4375" (28)
Weldon .5000" (294)
Weldon .6250" (229)
Weldon .7500" (304)
Weldon 1.000" (308)
Weldon 1.000" w/ Flange (7)
Weldon 1.250" (149)
Weldon 1.250" w/ Flange (28)
Weldon 1.500" (19)
Weldon 1.500" w/ Flange (1)
Weldon 10 mm (9)
Weldon 12 mm (10)
Weldon 14 mm (3)
Weldon 16 mm (30)
Weldon 2.000" (10)
Weldon 20 mm (25)
Weldon 25 mm (34)
Weldon 32 mm (23)
Weldon 40 mm (1)
Weldon 6 mm (11)
Weldon 8 mm (9)
Z4 (12)
Z5 (8)

Corner Chamfer

0.002 [0.04mm] (3)
0.002 [0.05mm] (1)
0.003 [0.08mm] (1)
0.004 [0.10mm] (4)
0.006 [0.15mm] (4)
0.006 [0.15mm] (10)
0.007 [0.18mm] (5)
0.008 [0.20mm] (3)
0.008 [0.20mm] (3)
0.010 [0.25mm] (13)
0.010 [0.25mm] (22)
0.011 [0.28mm] (2)
0.012 [0.30mm] (26)
0.012 [0.30mm] (19)
0.013 [0.33mm] (1)
0.014 [0.35mm] (4)
0.014 [0.36mm] (4)
0.015 [0.38mm] (10)
0.016 [0.40mm] (33)
0.016 [0.41mm] (40)
0.020 [0.50mm] (18)
0.020 [0.51mm] (24)
0.023 [0.58mm] (10)
0.024 [0.60mm] (34)
0.024 [0.61mm] (30)
0.030 [0.76mm] (26)
0.031 [0.79mm] (8)
0.033 [0.84mm] (4)
0.039 [0.99mm] (2)
0.040 [1.02mm] (12)
0.060 [1.52mm] (1)
0.062 [1.57mm] (1)
0.070 [1.78mm] (1)
0.078 [1.98mm] (1)
0.100 [2.54mm] (2)

Cutting Edge Angle

5.000 (1)
10.000 (1)
15.000 (8)
18.000 (1)
20.000 (20)
25.000 (5)
26.000 (11)
27.500 (1)
30.000 (41)
40.000 (4)
41.000 (12)
42.000 (42)
42.500 (1)
42.900 (1)
43.000 (24)
43.300 (1)
44.100 (3)
45.000 (262)
45.100 (1)
47.800 (1)
49.000 (1)
50.000 (4)
60.000 (55)
65.000 (8)
66.000 (15)
70.000 (42)
75.000 (18)
82.000 (2)
85.000 (6)
85.500 (10)
88.000 (12)
90.000 (865)
110.000 (14)
120.000 (7)

Eff. Teeth / Flutes

1 (29)
2 (673)
3 (814)
4 (1793)
5 (1120)
6 (1075)
7 (803)
8 (189)
9 (99)
10 (141)
11 (28)
12 (99)
13 (15)
14 (44)
15 (5)
16 (49)
17 (2)
18 (15)
19 (2)
20 (31)
21 (3)
22 (7)
23 (1)
24 (17)
26 (13)
28 (4)
30 (16)
31 (1)
34 (8)
38 (2)
39 (1)
40 (1)
50 (2)
51 (1)
63 (1)

Hand of Rotation

Left (15)
Neutral (105)
Right (2834)

UNC

1 (2)
1/2 (4)
1/4 (6)
10, 12 (1)
11/8-11/4 (1)
2 (1)
3 (2)
3/4 (1)
3/8 (3)
4 (2)
5 (3)
5/16 (4)
5/8 (2)
6 (2)
7/16 (2)
7/8 (1)
8 (5)
9/16 (2)

Back Angle

1.000 (1)
2.500 (1)
3.000 (2)
15.000 (1)
30.000 (1)
45.000 (17)
90.000 (12)

Coolant

No (1701)
Yes (2595)

Coolant Entry

0 - Without Coolant (3204912) (218)
1 - Axial Concentric (3204915) (225)

Number of Indexes

1 (203)
2 (580)
3 (88)
4 (1122)
5 (5)
6 (96)
8 (185)
10 (38)
12 (18)
16 (49)

UNF

1 (2)
1-11/2 (1)
1/4 (3)
10 (4)
2 (1)
3 (1)
3/4 (1)
4 (2)
5/16 (2)
5/16-3/8 (1)
6 (3)
7/16-1/2 (1)
7/8 (1)
9/16-5/8 (1)

Coolant Exit

0 - No Coolant (3205489) (218)
1 - Axial Concentic (3205490) (84)
1, 3 - Axial Concentic & Inclined (3214561) (103)
4 - Axial Concentric on Circle (3205496) (25)
7 - Decentral over Slots on the Shank (3344087) (13)

Flute Helix Angle

0 (42)
10 (31)
15 (12)
20-30 (2)
30 (197)
35 (9)
35-37 (124)
35-41 (6)
35/38 (14)
36 (14)
36-38 (17)
36-40 (1)
37 (20)
37-39 (12)
38 (2249)
39-41 (195)
40 (580)
43 (82)
45 (371)
46 (2)
46. (1)
46.5 (29)
47 (1)
47. (1)
50 (23)
55 (6)

Included Angle

10.000 (1)
20.000 (1)
30.000 (9)
40.000 (1)
55.000 (1)
60.000 (25)
80.000 (4)
82.000 (1)
90.000 (42)
100.000 (4)
120.000 (19)
144.000 (1)
150.000 (4)

Insert Hand

Left (62)
Neutral (685)
Right (1670)

Slot Width

0.028 [0.70mm] (1)
0.030 [0.76mm] (1)
0.032 [0.80mm] (1)
0.034 [0.86mm] (1)
0.035 [0.90mm] (1)
0.038 [0.96mm] (1)
0.039 [1.00mm] (3)
0.047 [1.20mm] (3)
0.055 [1.40mm] (2)
0.056 [1.42mm] (2)
0.059 [1.50mm] (4)
0.062 [1.57mm] (3)
0.062 [1.57mm] (5)
0.063 [1.60mm] (8)
0.067 [1.70mm] (3)
0.068 [1.73mm] (1)
0.077 [1.95mm] (1)
0.078 [1.98mm] (2)
0.079 [2.00mm] (12)
0.086 [2.18mm] (2)
0.087 [2.20mm] (7)
0.089 [2.25mm] (1)
0.094 [2.38mm] (3)
0.094 [2.39mm] (4)
0.094 [2.39mm] (3)
0.095 [2.40mm] (3)
0.097 [2.46mm] (11)
0.098 [2.50mm] (6)
0.105 [2.67mm] (2)
0.108 [2.75mm] (1)
0.118 [3.00mm] (17)
0.122 [3.10mm] (5)
0.125 [3.17mm] (3)
0.125 [3.18mm] (23)
0.128 [3.25mm] (1)
0.140 [3.56mm] (1)
0.154 [3.91mm] (1)
0.156 [3.96mm] (21)
0.158 [4.00mm] (16)
0.161 [4.09mm] (2)
0.161 [4.10mm] (5)
0.167 [4.25mm] (1)
0.187 [4.75mm] (21)
0.189 [4.80mm] (9)
0.197 [5.00mm] (7)
0.197 [5.00mm] (1)
0.207 [5.25mm] (2)
0.218 [5.54mm] (3)
0.236 [6.00mm] (11)
0.250 [6.35mm] (19)
0.270 [6.86mm] (1)
0.275 [6.99mm] (3)
0.276 [7.00mm] (4)
0.276 [7.01mm] (1)
0.281 [7.14mm] (3)
0.307 [7.80mm] (1)
0.312 [7.92mm] (13)
0.315 [8.00mm] (14)
0.354 [9.00mm] (1)
0.375 [9.53mm] (10)
0.376 [9.55mm] (3)
0.385 [9.78mm] (1)
0.394 [10.00mm] (11)
0.398 [10.11mm] (2)
0.400 [10.16mm] (1)
0.430 [10.92mm] (1)
0.433 [11.00mm] (1)
0.472 [12.00mm] (7)
0.480 [12.19mm] (1)
0.500 [12.70mm] (8)
0.551 [14.00mm] (1)
0.620 [15.75mm] (1)
0.625 [15.88mm] (10)
0.750 [19.05mm] (11)
0.827 [21.00mm] (2)
0.828 [21.03mm] (1)
1.000 [25.40mm] (10)
1.094 [27.79mm] (1)

UNEF

11/8-15/8 (1)
12 (1)
3/4-1 (1)
9/16-5/8 (1)

Usable Length Max

0.354 [9.00mm] (3)
0.472 [12.00mm] (3)
0.591 [15.00mm] (6)
0.787 [20.00mm] (3)
0.827 [21.00mm] (3)

Cutting Width

0.063 [1.60mm] (5)
0.078 [1.98mm] (3)
0.079 [2.00mm] (2)
0.087 [2.21mm] (5)
0.094 [2.39mm] (9)
0.097 [2.46mm] (2)
0.118 [3.00mm] (9)
0.122 [3.10mm] (6)
0.125 [3.18mm] (4)
0.156 [3.96mm] (2)
0.158 [4.00mm] (9)
0.161 [4.09mm] (6)
0.189 [4.80mm] (6)
0.197 [5.00mm] (6)
0.200 [5.08mm] (2)
0.203 [5.15mm] (3)
0.236 [5.99mm] (2)

Helix Hand

Left (5)
Right (151)

MFine

M06 (1)
n>=.16 (3)
n>=.24 (7)
n>=.28 (1)
n>=.39 (4)
n>=.47 (2)
n>=.55 (2)
n>=.98 (2)

Body Material

Carbide (128)
Heavy Metal (49)
Steel (145)

Insert Seat Size

1 (5)
2 (21)
4 (53)

Holder Shape

A (96)
B (16)
C (67)

Button Insert IC

0.236 [5.99mm] (2)
0.315 [8.00mm] (12)
0.394 [10.01mm] (20)
0.472 [11.99mm] (67)
0.500 [12.70mm] (18)
0.630 [16.00mm] (25)
0.750 [19.05mm] (6)
0.787 [19.99mm] (6)
1.000 [25.40mm] (5)

Product Family

3n1-Rounds (18)
Aluminator (28)
Black-Max (10)
CeraSFeed (26)
Chip-Surfer (1411)
Cougar-Mill (33)
Cougar-Mill-HSHR (21)
DiFeed-Deka (4)
DiFeedWinV (38)
DiPos-Deka (86)
DiPos-Hexa (70)
DiPos-Tetra (151)
DiPos-Trio (186)
DiPosDuo (240)
DiPosFeed (216)
DiPosFinishT (13)
DiPosPenta (34)
DiPosProB (18)
DiPosQuad (98)
DiPosQuadF (81)
Fast-Break (19)
Feed-Rounds (26)
FineMold+ (12)
Finish-Ball Plus (93)
Form-Master (8)
Form-Master Cera (1)
Form-Master Cera Plus (12)
Form-Master Plus (19)
Form-Master Pro (46)
Form-Master R (50)
Form-Master Shear (180)
Form-Master V (6)
Form-Master Wave (7)
Gold-Max 4 (272)
Gold-Max 4 FFIN (16)
Gold-Max 8 (10)
Gold-Quad (88)
Gold-Quad Extcut (4)
Gold-Quad XXX (20)
Gold-Slot (161)
GoldSFeed (244)
HE-Rounds (82)
HiPos (84)
HiPos-Alu (72)
HiPos-Micro (116)
HiPos-Plus (483)
HiPos-Quad (84)
HiPos-Trio (210)
HiPosProB (16)
HiPosSFeedV (40)
HiPosWinV (68)
Holder Family (10)
Hyper-Rounds (187)
ISO Negative Hex Inserts (2)
ISO Positive Octagonal Inserts (17)
ISO Positive Square Inserts (33)
ISO Positive Triangular Inserts (5)
ISO-Plus (126)
IT.TE.DI. (11)
ITTEDI Micro Line (18)
Iron-Eater (10)
MaxSFeed (252)
Micro-Mill (22)
MultiSurfer (82)
NanoFeed (10)
NuMaxHF (18)
NuMaxHFA (13)
NuMaxILOCK (124)
Octo-Plus (108)
Power-Feed 13 Plus (37)
Power-Max (12)
Power-Rounds (278)
Pro-Ball (38)
Pro-Duo (31)
Pro-Rounds (100)
Pro-Trio (29)
Punch-In Quad (16)
Quad-Bore (36)
Quad-Plus Finish (24)
Rapid-Thread (142)
RhinoRounds (2520)
Roto-Mill (41)
Rough-Air (90)
RoughFin-Rounds (40)
S-Max (90)
Stedi-Rounds (263)
Super-Max (10)
T-Clamp Ultra (153)
T-Clamp Ultra Inserts (17)
TediBrazed (35)
TediFeed (168)
TediMill (90)
TediOctoCut (5)
TediSFeed (30)
Tek-Rounds (43)
V-Max (55)

Product Categories

Indexable Milling

Solid Mills

Product Categories

Indexable Milling

Solid Mills

3n1-Rounds
45D_RP - Hi-Feed End Mill

Ø.250-.750"
Cylindrical Shank
4 or 5 flutes, 38° Helix
Large corner radii
Chatter-free combo hi-feed variable pitch & chip splitter
Serrated cutting edge features flat peaks which leave a better surface finish when compared to competitors' roughing end mills
Provides the greatest advantage in cavity milling and heavy roughing cuts

3n1-Rounds
47DRP - Hi-Feed End Mill

Ø6-20 mm
Cylindrical Shank (Metric)
4 or 5 flutes, 38° Helix, large corner radii
Chatter-free combo high-feed variable pitch chipsplitter
Serrated cutting edge features flat peaks which leave a better surface finish when compared to competitors' roughing end mills
Provides the greatest advantage in cavity milling and heavy roughing cuts

Aluminator
15U1G - 90° Rough & Finish End Mill

Ø1.000-2.000"
Weldon Shank
11 mm Insert with 4 indexes
15-32 Ra surface finishes when engaging wiper (WEP)
Insert corners: .008" .020" .031" .062" .093", .125" R
.41" Depth of cut

Aluminator
15U1G - 90° Rough & Finish End Mill

Ø1.000-1.500"
TopOn Connection
11 mm Insert with 4 indexes
Insert corners: .008" .020" .031" .062" .093", .125" R
15-32 Ra surface finishes when engaging wiper (WEP)
.41" Depth of cut

Aluminator
15U1G - 90° Rough & Finish End Mill (Metric)

Ø25.00 - 40.00 mm
TopOn Connection
11 mm Insert with 4 indexes
Insert corners: .008" .020" .031" .062" .093", .125" R
15-32 Ra surface finishes when engaging wiper (WEP)
8.4 mm Depth of cut

Aluminator
5H6G - 90° Rough & Finish Face Mill

Ø2.000-6.000"
11 mm Insert with 4 indexes
.41" Depth of Cut
15-32 Ra surface finishes when engaging wiper (WEP)
Insert corners: .008", .020", .031", .062", .093", .125" R

Aluminator
5H6G - 90° Rough & Finish Face Mill (Metric)

Ø50.00 - 100.00 mm
11 mm Insert with 4 indexes
8.4 mm Depth of Cut
15-32 Ra surface finishes when engaging wiper (WEP)
Insert corners: .008", .020", .031", .062", .093", .125" R

Aluminator
SHET11 - Insert for Non-Ferrous

Sharp edge & polished rake face for non-ferrous materials
Wiper flats on face for producing 15-25 Ra surface finishes
4 Indexes

Black-Max
19N1A - 45° End Mill

Ø1.000-2.000"
Weldon Shank
Insert with 4 indexes
Power Shear geometry ideally suited for hard materials, weld & interruptions
.31" Max. depth of cut

Black-Max
9N6A - 45° Face Mill

Ø2.00- 6.00"
Insert with 4 indexes
.31" Max depth of cut
Power shear geometry ideally suited for hard materials, weld & interruptions

Black-Max
LSE324R045-S

Milling Insert

CeraSFeed
1ZG3D - Hi-Feed Ceramic End Mill

Ø.625-1.250
Cylindrical Shank
6 mm IC Insert, double sided inserts
4 Cutting edge insert, 4 indexes
.039" Max. depth of cut
Strong secure clamping
Excellent high-feed performance & economy!

CeraSFeed
1ZG3D - Hi-Feed Ceramic End Mill - ChipSurfer

Ø.625-1.000”
Chip Surfer Connection
6 mm IC Insert, double sided
4 Cutting edge insert, 4 indexes
.039" Max. depth of cut
Strong secure clamping
Excellent hi-feed performance & economy!

CeraSFeed
1ZG3D - Hi-Feed Ceramic End Mill - Top On

Ø.625-1.250”
TopOn Connection
6 mm IC Insert, double sided
4 Cutting edge insert, 4 indexes
.039" Max. depth of cut
Strong secure clamping
Excellent hi-feed performance & economy!

CeraSFeed
1ZG3F - Hi-Feed Ceramic End Mill

Ø1.000-1.500
Cylindrical Shank
9 mm IC Insert, double sided inserts
4 Cutting edge insert, 4 indexes
.060" Max. depth of cut
Strong secure clamping
Excellent high-feed performance & economy!

CeraSFeed
DG1H*R01, DG2H*R01 - Hi-Feed Face Mill

Ø2.000-3.000"
12 mm IC insert with 6 indexes
.098” Max. depth of cut
Strong secure wedge clamp system
Excellent hi-feed performance & economy!

CeraSFeed
LNXF0603R01, 6 mm IC Ceramic Hi-Feed Insert

Ceramic Hi-Feed Insert
Ideal for high feed milling of difficult-to-cut materials
4 Indexes

CeraSFeed
TG1Q*R01, TG2Q*R01 - Ceramic Hi-Feed Face Mill

Ø2.000"
9 mm IC Insert with 4 indexes
.060” Max. depth of cut
Strong secure dimple clamp system
Excellent Hi-Feed performance & economy!

CeraSFeed
TNXN1207N0104, 12 mm IC Ceramic Hi-Feed Insert

Ceramic Hi-Feed Insert
Ideal for high feed milling of difficult-to-cut materials
6 Indexes

Chip-Surfer
16N_K - Front & Back Chamfer Tip

Ø.697"
Chip Surfer Connection
3 Flute
45° Front & Back Chamfer

Chip-Surfer
16N_P - Front/Back Chamfer, Keen Edge

Ø.697"
Chip Surfer Connection
3 Flute
45° Front & Back Chamfer
For soft and gummy materials

Chip-Surfer
16R - Full Radius T-Slitter

Ø15.7-17.7 mm
Chip Surfer Connection
2.2-3.00 mm width of slot range
3 Flute
Positive radial and neutral axial rake geometry
Ideal for O-Ring grooves

Chip-Surfer
16T_K - Multi-Purpose T-Slitter

Ø15.7-17.7 mm
Chip Surfer Connection
3 Flute Slitter
1.5-3.17 mm width of slot range
Positive radial and neutral axial rake geometry
Ideal for steels & iron

Chip-Surfer
16T_P - T-Slitter w/ Keen Edge

Ø15.7 mm
Chip Surfer Connection
3 Flute Slitter
1.5-3.00 mm width of slot range
Positive radial and neutral axial rake geometry
Ideal for soft & gummy materials

Chip-Surfer
17N - Extended Neck Front & Back Chamfer Tip

Ø7.7mm
Chip Surfer Connection
4 Flute
45° Front & Back Chamfer

Chip-Surfer
17N_K - Front & Back Chamfer Tip

Ø.854"
Chip Surfer Connection
4 Flute
45° Front & Back Chamfer

Chip-Surfer
17N_P - Front/Back Chamfer, Keen Edge

Ø.854"
Chip Surfer Connection
4 Flute
45° Front & Back Chamfer
For soft and gummy materials

Chip-Surfer
17R - Full Radius T-Slitter

Ø21.7 mm
Chip Surfer Connection
4.0-6.0 mm width of slot range
4 Flute
Positive radial and neutral axial rake geometry
Ideal for O-ring grooves

Chip-Surfer
17T - Extended Neck T-Slitter

Ø7.7 mm
Chip Surfer Connection
4 Flute Slitter
0.70-2.00 mm width of slot range
Positive radial & neutral axial rake geometry

Chip-Surfer
17T_K - Multi-Purpose T-Slotter

Ø21.7 mm
Chip Surfer Connection
4 Flute Stagger Tooth Slotter
0.76-5.25 mm width of slot range
Positive radial and positive axial rake geometry
Ideal for steels & iron

Chip-Surfer
17T_P - T-Slotter w/ Keen Edge

Ø21.7 mm
Chip Surfer Connection
4 Flute Stagger Tooth Slotter
1.00-4.00 mm width of slot range
Positive radial and positive axial rake geometry
Ideal for soft & gummy materials

Chip-Surfer
18F - 90° Face Mill Tip

Ø12-25 mm
Chip Surfer Connection
6 Flute
.3xD Flute Length
Non-Center Cutting
Corner: 0.2 & 0.4 mm R
20-32 Ra surface finishes
Ideal for facing and shouldering in narrow confined areas.
Well suited for milling flats on bar stock with Mill-Turn machines.

Chip-Surfer
18N - Front & Back Chamfer Tip

Ø.625-1.090"
Chip Surfer Connection
6 Flute
45° Front & Back Chamfer

Chip-Surfer
18R - Full Radius T-Slitter

Ø.500"-.900"
Chip Surfer Connection
.062"-.187" Slot Width
6 Flute, Full Eff
Positive radial and neutral axial rake geometry

Chip-Surfer
18R - Full Radius T-Slot

Ø27.7 mm
Chip Surfer Connection
7.0 mm width
6 Flute, Stagger Tooth
Positive radial and positive axial rake geometry

Chip-Surfer
18R - Full Radius T-Slotter

Ø.910"
Chip Surfer Connection
.250"-.375" Slot Width
6 Flute, Stagger Tooth
Positive radial and positive axial rake geometry

Chip-Surfer
18S - Front Back Corner Round

Ø27.7 mm
Chip Surfer Connection
Corner: 1.0, 2.0, 3.0 & 4.0 mm R
6 Flute

Chip-Surfer
18T - T-Slot Tip

Ø.500-1.000"
Chip Surfer Connection
6 Flute stagger tooth
.056-.375" Width of slot range
Positive axial & positive radial rake geometry

Chip-Surfer
18T - T-Slot Tip

Ø13.5-27.7 mm
Chip Surfer Connection
6 Flute stagger tooth
2.0-10.0 mm width of slot range
Positive axial & positive radial rake geometry

Chip-Surfer
18V - Dovetail Tip

Ø.500-1.090"
Chip Surfer Connection
6 Flute
Back-Angle: 5°, 10°, 15°, 20°, 27.5°, 30°, 45° & 60°
Included Angle: 10°, 20°, 30°, 40°, 55°, 60°, 90° & 120°

Chip-Surfer
45A - Hi-Feed, Neutral

Ø.375-.750"
Chip Surfer Connection
2 Flute, neutral geometry
Ideal for tight corners, long reach and other abusive conditions

Chip-Surfer
45A - Hi-Feed, Neutral

Ø10-20 mm
Chip Surfer Connection
2 Flute, neutral geometry
Ideal for tight corners, long reach and other abusive conditions

Chip-Surfer
45B_T_P - Ball Nose for Aluminum

Ø.312-1.000"
Chip Surfer Connection
2 Flute, 45° Helix
.7xD Flute Length
Sharp & uncoated for nonferrous materials

Chip-Surfer
45B_T_P - Ball Nose for Aluminum

Ø8-25 mm
Chip Surfer Connection
2 Flute, 45° Helix
.7xD Flute Length
Sharp and uncoated for nonferrous materials

Chip-Surfer
45B_T_RA - Positive Ball Nose

Ø.312-.625"
Chip Surfer Connection
2 Flute, 0° Helix
1.0xD Flute Length
Positive radial rake
Ideal for soft materials and finishing in stable conditions
Pressed flute geometry offers economical benefit

Chip-Surfer
45B_T_RA - Positive Ball Nose

Ø8-16 mm
Chip Surfer Connection
2 Flute, 0° Helix
1.0xD Flute Length
Positive radial rake
Ideal for soft materials and finishing in stable conditions
Pressed flute geometry offers economical benefit

Chip-Surfer
45B_T_RB - Helical Ball Nose

Ø.312-.750"
Chip Surfer Connection
2 Flute, 30° Helix
.7xD Flute Length
2 Center-cutting flutes

Chip-Surfer
45B_T_RB - Helical Ball Nose

Ø8-16 mm
Chip Surfer Connection
2 Flute, 30° Helix
.7xD Flute Length
2 Center-cutting flutes

Chip-Surfer
45B_T_RW - Neutral Ball Nose

Ø.312-.625"
Chip Surfer Connection
2 Flute, 0° Helix
1.0xD Flute Length
Neutral radial rake for edge strength & durability
Ideal for hard steel and finishing irregular stock conditions
Pressed flute geometry offers economical benefit

Chip-Surfer
45B_T_RW - Neutral Ball Nose

Ø8-16 mm
Chip Surfer Connection
2 Flute, 0° Helix
1.0xD Flute Length
Neutral radial rake for edge strength & durability
Ideal for hard steel and finishing irregular stock conditions
Pressed flute geometry offers economical benefit

Chip-Surfer
45D - 90° Drill-Mill Tip

Ø7.8-16 mm
Chip Surfer Connection
2 Flute, 10° Helix
1.0xD Flute Length
Center-cutting
Corner: 0.2, 0.4, 0.3, 0.8, 1.0 & 2.0 mm R
Ideal for milling blind key-slots
Economical solution for 90° shoulders

Chip-Surfer
45D - 90° Drill-Mill Tip

Ø.312-.625"
Chip Surfer Connection
2 Flute, 10° Helix
1.0xD Flute Length
Center-cutting
Corner: .015" R
Ideal for milling blind key-slots
Economical solution for 90° shoulders

Chip-Surfer
45D - 90° End Mill for Aluminum

Ø8-12 mm
Chip Surfer Connection
2 Flute, 45° Helix
.7xD Flute Length
Center-cutting
Corner: 0.5 & 1.0 mm R
Sharp and uncoated for nonferrous materials

Chip-Surfer
45D-P - 90° End Mill Tip for Aluminum

Ø.375-.750"
Chip Surfer Connection
2 Flute, 35°or 45° Helix
.7xD Flute Length
Center-cutting
Corner: Sharp, .020" .062" & .125" R
Sharp and uncoated for nonferrous materials

Chip-Surfer
45N_RA - Front-Back Chamfer & C'Sink

Ø1.20 mm Min.
Chip Surfer Connection
45° Cutting Edge Angle (front & back)
90° Included Angle
2 flute

Chip-Surfer
45NMP_RA - Chamfer & Spotting Tip

Ø8-20 mm
Chip Surfer Connection
Cutting Edge Angle options: 18° 30° 40° 45° 50° & 60°
Included Angle options: 144° 120° 100° 90° 80° & 60°
80° Incl. for countersink according to ANSI B18.3 Flat Head Cap Screw (up to 82°)
2 Flute

Chip-Surfer
45Q - Engraving Tip

90° Included Angle
Chip Surfer Connection
1 Flute, R .010" Point

Chip-Surfer
45Q_RA - Engraving Tip

Ø8 mm
Chip Surfer Connection
Cutting Edge Angle: 22.5° 30° & 45°
Included Angle : 45° 60° & 90°
1 Flute, R 0.2 mm Point

Chip-Surfer
45R - Corner Round

Ø4.7 mm Min.
Chip Surfer Connection
Corner: 1.0, 1.6, 2.0 ,2.5, 3.0, 4.0, 5.0 & 6.0 mm R
2 Flute

Chip-Surfer
45U - Backdraft Toroid

Ø10-20 mm
Chip Surfer Connection
2 Flute, 0° Helix
Center-cutting
Corners: 0.5, 1.0, 1.6, 2.0, 2.5, 3.0, 4.0, 5.0, 6.0 & 8.0 mm R

Chip-Surfer
45U - Backdraft Toroid Tip

Ø.625-.750"
Chip Surfer Connection
2 Flute, 0° Helix
Center-cutting
Corners: .187" .250" & .312" R

Chip-Surfer
45V - Flat Bottom Plunge & Spotface

Ø.312-.625"
Chip Surfer Connection
2 Flute, Center-Cutting
Corner: .031" R
Ideal for long reach Z-Axis plunge roughing, spotfacing, shallow counterboring & creating flat bottom in holes

Chip-Surfer
45V - Flat Bottom Plunge/Spot

Ø8-16 mm
Chip Surfer Connection
2 Flute, Center-Cutting
Corner: 0.4 & 0.8 mm R
Ideal for long reach Z-Axis plunge roughing, spotfacing, shallow counterboring & creating flat bottom in holes

Chip-Surfer
45V-P - Flat Bottom Plunge/Spot Aluminum

Ø8-16 mm
Chip Surfer Connection
2 Flute, Center-Cutting, Sharp & Polished
Corner: 0.4 mm R
Ideal for long reach Z-Axis plunge roughing, spotfacing, shallow counterboring & creating flat bottom in holes

Chip-Surfer
45V-P - Flat Bottom Plunge/Spot for Aluminum

Ø.312-.625"
Chip Surfer Connection
2 Flute, Center-Cutting, Sharp & Polished
Corner: .015" R
Ideal for long reach Z-Axis plunge roughing, spotfacing, shallow counterboring & creating flat bottom in holes

Chip-Surfer
45X - Spherical Ball Nose

Ø.375-1.00"
Chip Surfer Connection
2 Flute, 0° Helix
.7xD Flute Length
120° Radius Wrap

Chip-Surfer
45X - Spherical Ball Nose

Ø10-20 mm
Chip Surfer Connection
2 Flute, 0° Helix
.7xD Flute Length
120° Radius Wrap

Chip-Surfer
45Z - Center Drill Tip

Ø3.2-6.4 mm
Chip Surfer Connection
DIN 332

Chip-Surfer
45Z - Center Drill Tip

Ø.12-.25"
Chip Surfer Connection
ANSI B94 #4, #5, #6 & #7

Chip-Surfer
45Z_RA - NC Spot Drill

Ø8-16 mm
Chip Surfer Connection
90° & 145° Incl. Angle
Thin web thickness at the point prevents "tool walking"
Accurate hole locating without use of guide bushing

Chip-Surfer
45Z_RA - NC Spot Drill

Ø.312-.625
Chip Surfer Connection
145° Incl. Angle
Thin web thickness at the point prevents "tool walking"
Accurate hole locating without use of guide bushing

Chip-Surfer
46B_T_RB - Helical Ball Nose

Ø8-20 mm
Chip Surfer Connection
3 Flute, 30° Helix
.7xD Flute Length
1 Center-cutting flute

Chip-Surfer
46B-P - Ball Nose for Aluminum

Ø.312-.750"
Chip Surfer Connection
3 Flute, 38° Helix
.7xD Flute Length
Sharp and uncoated for nonferrous materials

Chip-Surfer
46D & 46J - 90° End Mill

Ø7.7-19.7 mm
Chip Surfer Connection
3 Flute, 38° & 45° Helix
.7xD Flute Length
Center-cutting
Corner: Sharp, 0.2, 0.3 & 0.4 R

Chip-Surfer
46D & 46J - 90° End Mill Tip

Ø.312-.500"
Chip Surfer Connection
3 Flute, 45° Helix
.7xD Flute Length
Center-cutting
Corner: Sharp .015" .031" & .062 R

Chip-Surfer
46D_RB - Lens Form Finisher (Metric)

Ø8.0-20.0 mm (T-Adaption)
3 Flute, 30° helix, center-cutting, with coolant
0.02 mm profile tolerance
Precise lens-shape face geometry for finishing decks using 3-Axis Machine
Improved surface finish with 2x productivity when compared to a ballnose

Chip-Surfer
46D_RN - 90° End Mill for Aluminum

Ø8-20 mm
Chip Surfer Connection
3 Flute, 45° Helix
.7xD Flute Length
Center-cutting
Serrated edge
Corner: 0.2mm R
Sharp and uncoated for nonferrous materials

Chip-Surfer
46D_RN - 90° End Mill Tip for Aluminum

Ø.312-.750"
Chip Surfer Connection
3 Flute, 45° Helix
.7xD Flute Length
Center-cutting
Serrated edge
Corner: .008" R
Sharp and uncoated for nonferrous materials

Chip-Surfer
46D-P - 90° End Mill for Aluminum

Ø8-20 mm
Chip Surfer Connection
3 Flute, 45° Helix
.7xD Flute Length
Center-cutting
Corners: SC, 0.5, 1.0, 2.0, 3.0, 4.0 R
Sharp and uncoated for nonferrous materials

Chip-Surfer
46D-P - 90° End Mill Tip for Aluminum

Ø.312-1.000"
Chip Surfer Connection
3 Flute, 45° Helix
.7xD Flute Length
Center-cutting
Corners: SC, .020", .031", .062", .094", .125" R
Sharp and uncoated for nonferrous materials

Chip-Surfer
46D-P & 46J-P - 90° End Mill Tip for Aluminum

Ø.375 - 1.250"
Chip Surfer Connection
3 Flute, 45° Helix
1.0XD Flute Length
Center-cutting
Corners: SC, .030", .060", .090", .123", .190", .250", .375" R
Sharp and uncoated for nonferrous materials

Chip-Surfer
46N_RA - Front-Back Chamfer & C'Sink

Ø11.6 mm
Chip Surfer Connection
45° Cutting Edge Angle (front & back)
90° Included Angle
3 flute

Chip-Surfer
46Q - Fine Engraving Tip

60° Included Angle
Chip Surfer Connection
3 Flute, Sharp Point

Chip-Surfer
46W_0 - Taper Form Finisher

Ø8.0-16.0 mm
Chip Surfer Connection
3 Flute, 30° helix, 0.02 mm profile tolerance
Non-center cutting ball tip
1.5, 2.0, 3.0 & 4.0 R nose
Ideal for finishing blisks, impellers & turbine rotors

Chip-Surfer
46W_1 - Taper Form Finisher for Aluminum

Ø8.0-16.0 mm
Chip Surfer Connection
3 Flute, 30° helix, 0.02 mm profile tolerance
Non-center cutting ball tip
1.5, 2.0, 3.0 & 4.0 R nose
Sharp & uncoated for nonferrous materials
Ideal for finishing blisks, impellers & turbine rotors

Chip-Surfer
47_RN & 48_RN - 90° Rough End Mill

Ø8-25 mm
Chip Surfer Connection
4, 5, & 6 Flute, 45° Helix
.7xD Flute Length
4 Flute Center-cutting
5 & 6 Flute Non-Center-Cutting
Serrated edges aid with chip evacuation and accelerated feed rates
Corner: chamfer options

Chip-Surfer
47_RN & 48_RN - 90° Rough End Mill Tip

Ø.312-1.000"
Chip Surfer Connection
4, 5, & 6 Flute, 45° Helix
.7xD Flute Length
4 Flute Center-cutting
5 & 6 Flute Non-Center-Cutting
Serrated edges aids with chip evacuation and accelerated feed rates
Corner: chamfer & radius options

Chip-Surfer
47_RQ - 90° Variable Pitch End Mill

Ø8-32 mm
Chip Surfer Connection
4 Flute, 38° Helix
.7xD Flute Length
Center-cutting
Unequal spacing between flutes to diffuse vibration
Corner: Sharp, Chamfer & Radius options

Chip-Surfer
47_RQ - 90° Variable Pitch End Mill Tip

Ø.312-1.000"
Chip Surfer Connection
4 & 5 Flute, 38° Helix
.7xD Flute Length
Center-cutting
Unequal spacing between flutes to diffuse vibration
Corner: Sharp, Chamfer & Radius options

Chip-Surfer
47_RU - 90° Rough-Fin End Mill

Ø8-25 mm
Chip Surfer Connection
4 Flute, 45° Helix
.7xD Flute Length
Center-cutting
2 serrated edges & 2 smooth edges to diffuse vibration
Corner: chamfers

Chip-Surfer
47_RU - 90° Rough-Fin End Mill Tip

Ø.312-1.000"
Chip Surfer Connection
4 Flute, 45° Helix
.7xD Flute Length
Center-cutting
2 serrated edges & 2 smooth edges to diffuse vibration
Corner: chamfer & radius options

Chip-Surfer
47A_T_RA - Hi-Feed, Positive

Ø.50-75"
Chip Surfer Connection
4 Flute, positive geometry
Ideal for hard steel, SS & high-temp alloys

Chip-Surfer
47A_T_RA - Hi-Feed, Positive

Ø8-20 mm
Chip Surfer Connection
4 Flute, positive geometry
Ideal for hard steel, SS & high-temp alloys

Chip-Surfer
47B_T_RB - Helical Ball Nose

Ø.312-1.000"
Chip Surfer Connection
4 Flute, 30° Helix
.7xD Flute Length
2 Center-cutting flutes

Chip-Surfer
47B_T_RB - Helical Ball Nose

Ø8-25 mm
Chip Surfer Connection
4 Flute, 30° Helix
.7xD Flute Length
2 Center-cutting flutes

Chip-Surfer
47B_T_RB - Helical Ball Nose (1.3xD Flute)

Ø.312-1.000"
Chip Surfer Connection
4 Flute, 30° Helix
1.3xD Flute Length
2 Center-cutting flutes

Chip-Surfer
47B_T_RM - Helical Roughing Ball Nose

Ø.500-1.000"
Chip Surfer Connection
4 Flute, 35° Helix
.7xD Flute Length
Variable Pitch, Progressive Chip Splitters
2 Center-cutting flutes

Chip-Surfer
47B_T_RQ - Variable Pitch Helical Ball Nose

Ø8-20 mm
Chip Surfer Connection
4 Flute, 45° Helix
.7xD Flute Length
4 Center-cutting flutes
Ideal for hard steel
Well suited for finishing on 5 axis machines

Chip-Surfer
47B_T_RQ - Variable Pitch Helical Ball Nose

Ø.312-.750"
Chip Surfer Connection
4 Flute, 45° Helix
.7xD Flute Length
4 Center-cutting flutes
Ideal for hard steel
Well suited for finishing on 5 axis machines

Chip-Surfer
47B_TQ - Helical Ball Nose

Ø.187-.250"
Chip Surfer Connection
4 Flute, 38° Helix
2 Center-cutting flutes

Chip-Surfer
47B_TQ - Helical Ball Nose

Ø5-6 mm
Chip Surfer Connection
4 Flute, 38° Helix
2 Center-cutting flutes

Chip-Surfer
47C 48C - 90° End Mill (1.5xD Flute)

Ø8-25 mm
Chip Surfer Connection
4, 5 & 6 Flute
4 Flute Center Cutting
5 & 6 Flute Non-Center-Cutting
1.5xD Flute Length
Serrated edges aids with chip evacuation and accelerated feed rates
Chamfered Corners

Chip-Surfer
47C 48C - 90° Roughing End Mill (1.5xD Flute)

Ø.312-1.000"
Chip Surfer Connection
4, 5 & 6 Flute
4 Flute Center Cutting
5 & 6 Flute Non-Center-Cutting
1.5xD Flute Length
Serrated edges aids with chip evacuation and accelerated feed rates
Chamfered Corners

Chip-Surfer
47C_RQ1 - 90° Variable Pitch EM for Hi-Temps

Ø8-25 mm
Chip Surfer Connection
5 Flute, 35°-41° Helix
.7xD Flute Length
Unequal spacing between flutes to diffuse vibration
Corner: Chamfer options
Ideal for Inconel & Hi-Temp Alloys

Chip-Surfer
47D & 47J - 90° End Mill Tip

Ø8-20 mm
Chip Surfer Connection
4 Flute, 30° & 45° Helix
.7xD Flute Length
Center-cutting
Corners: sharp, 0.5, 1.0, 1.5, 2.0, 3.0 & 4.0 R

Chip-Surfer
47D & 47J - 90° End Mill Tip

Ø.312-.750"
Chip Surfer Connection
4 Flute, 30° & 45° Helix
.7xD Flute Length
Center-cutting
Corners: sharp, .015", .031", .062" R

Chip-Surfer
47D_RB - Lens Form Finisher

Ø.312-.500 (T-Adaption)
4 Flute, 30° helix, center-cutting
.00078 profile tolerance
Precise lens-shape face geometry for finishing decks using 3-Axis Machine
Improved surface finish with 2x productivity when compared to a ballnose

Chip-Surfer
47D_RB - Lens Form Finisher (Metric)

Ø8.0-16.0 mm (T-Adaption)
4 Flute, 30° helix, center-cutting
0.02 mm profile tolerance
Precise lens-shape face geometry for finishing decks using 3-Axis Machine
Improved surface finish with 2x productivity when compared to a ballnose

Chip-Surfer
47D_RQ - 90° Variable Pitch End Mill (1.5xD Flute)

Ø8-25 mm
Chip Surfer Connection
4 Flute, 1.5xD Flute Length
Variable Pitch
Center Cutting
Corner: 0.5 R

Chip-Surfer
47D_RQ - 90° Variable Pitch End Mill (1.5xD Flute)

Ø.312-1.000"
Chip Surfer Connection
4 Flute, 1.5xD Flute Length
Variable Pitch
Center Cutting
Corner: sharp, .015" & .031"R

Chip-Surfer
47D_RQ - 90° Variable Pitch End Mill Tip for SS & Hi-Temps

Ø32.00 mm (Metric)
Chip Surfer Connection
5 Flute, 35°/38° Helix
Variable Pitch
Center Cutting
Corner: .157", .197" R

Chip-Surfer
47D_RQ - 90° Variable Pitch Tip for SS & Hi-Temps

Ø.750-1.250"
Chip Surfer Connection
5 Flute, 36°-38° Helix
1.0xD Flute Length
Center-cutting
Corners: .030" .060" .090" .120" .190" .250" .375" R

Chip-Surfer
47J - 90° Small Dia. End Mill

Ø5-6 mm
Chip Surfer Connection
4 Flute, 45° Helix
Center-cutting
Sharp corner

Chip-Surfer
47J & 45J - 90° Small Dia. End Mill Tip

Ø.062-.250"
Chip Surfer Connection
2 or 4 Flutes, 38° Helix
Center-cutting
Sharp corner

Chip-Surfer
47N & 48N - Chamfer & Countersink Tip

Ø1.95 mm Min.
Chip Surfer Connection
4 & 6 Flute
Cutting Edge Angle options: 30°, 45°, 49° & 60°
Included Angle options: 120°, 90°, 82° & 60°
Non-center cutting

Chip-Surfer
47R - Corner Round Tip

Ø.12" Min.
Chip Surfer Connection
Corners: .031" .062" .093" .125" .187" .250" .312" & .375" R
4 Flute

Chip-Surfer
47R - Corner Round Tip

Ø5.1 mm Min.
Chip Surfer Connection
Corners: 1.0, 1.6, 2.0, 2.5, & 3.0 mm R
4 Flute

Chip-Surfer
47W - Taper Form Finisher

Ø.312-.500
Chip Surfer Connection
4 Flute, 30° helix, 0.02 mm profile tolerance
Center cutting ball tip
.060" .123" & .157" R nose
Ideal for finishing blisks, impellers & turbine rotors

Chip-Surfer
47W - Taper Form Finisher

Ø8.0-16.0 mm
Chip Surfer Connection
4 Flute, 30° helix, 0.02 mm profile tolerance
Center cutting ball tip
1.5, 2.0, 3.0 & 4.0 R nose
Ideal for finishing blisks, impellers & turbine rotors

Chip-Surfer
47W_1 - Non-Ferrous Taper Form Finisher

Ø.312-.500
Chip Surfer Connection
4 Flute, 30° helix, 0.02 mm profile tolerance
Center cutting ball tip
.060" .123" & .157" R nose
Ideal for finishing blisks, impellers & turbine rotors

Chip-Surfer
47W_1 - Non-Ferrous Taper Form Finisher (Metric)

Ø8.0-16.0 mm
Chip Surfer Connection
4 Flute, 30° helix, 0.02 mm profile tolerance
Center cutting ball tip
1.5, 2.0, 3.0 & 4.0 R nose
Ideal for finishing blisks, impellers & turbine rotors

Chip-Surfer
47Z - Double Groove Tip for Tube Sheets

Ø.437-.625"
Chip Surfer Connection
4 Flute, 2x .125" wide grooves
Ideal for heat exchange tube sheet grooves

Chip-Surfer
48_ & 49_ - 90° End Mill Tip

Ø8-20 mm
Chip Surfer Connection
6, 8, & 10 Flute, 30 or 45° Helix
.7xD Flute Length
Non-Center Cutting
Corner: Sharp, 0.5, 1.0, 1.5 & 2.0 R

Chip-Surfer
48_ & 49_ - 90° End Mill Tip

Ø.312-1.000"
Chip Surfer Connection
6, 8, & 10 Flute, 30 or 45° Helix
.7xD Flute Length
Non-Center Cutting
Corner: Sharp, .015", .031", .062", .125"R

Chip-Surfer
48A_T_RA - Hi-Feed, Positive

.500-1.000"
Chip Surfer Connection
6 Flute, positive geometry, non-center-cutting
Ideal for hard steel, SS & high-temp alloys

Chip-Surfer
48A_T_RA - Hi-Feed, Positive

Ø10-25 mm
Chip Surfer Connection
6 Flute, positive geometry, non-center-cutting
Ideal for hard steel, SS & high-temp alloys

Chip-Surfer
48A_T_RX - Hi-Feed, Neutral

Ø8.00 - 25.00mm
Chip Surfer Connection
6 Flute, neutral geometry
Two flutes center cut for higher ramp capability

Chip-Surfer
48A_T_RX - Hi-Feed, Neutral

Ø0.500"
Chip Surfer Connection
6 Flute, neutral geometry
Two flutes center cut for higher ramp capability

Chip-Surfer
48D 49D - 90° Finish End Mill (1.5xD Flute)

Ø8-25 mm
Chip Surfer Connection
7 & 9 Flute, Different Helix & Variable Pitch
1.5xD Flute Length
Non-Center Cutting
Corner: 0.5 0.8 & 1.0 mm R
Ideal for finishing!

Chip-Surfer
48D 49D - 90° Finishing End Mill (1.5xD Flute)

Ø.312-1.000"
Chip Surfer Connection
7 & 9 Flute, Different Helix & Variable Pitch
1.5xD Flute Length
Non-Center Cutting
Corner: .015" & .031"R
Ideal for finishing!

Chip-Surfer
48D_RQ - 90° Variable Pitch End Mill Tip for SS & Hi-Temps

Ø8.00 - 25.00 mm (Metric)
Chip Surfer Connection
6 Flute, 35°/38° Helix
Variable Pitch
Center Cutting
Corner: .015", .020", .031", .039", .118", .157" R

Chip-Surfer
48E_RB - Barrel Form Finisher

Ø12.0-16.0 mm (T-Adaption)
6 Flute, 30° helix, Center-Cutting
Precise barrel-shape geometry for finishing 90° and drafted shoulders using 3-Axis and 5-Axis Machines.
Improved surface finish with 3x productivity when compared to a ballnose

Chip-Surfer
48U - Backdraft Toroidal Tip

Ø.375-.625"
Chip Surfer Connection
6 Flute, 30° Helix
Corners: .031", .062", .125", .200" R

Chip-Surfer
48U - Backdraft Toroidal Tip (Metric)

Ø8.00 - 16.00mm
Chip Surfer Connection
6 Flute, 30° Helix
Corners: .031", .062", .125", .200" R

Chip-Surfer
49L - Face & Countour Tip

Ø11-15 mm
Chip Surfer Connection
8 & 12 Flute, Variable Pitch & Helix
82° Cutting Edge Angle
1 mm Corner Radius
Non-center cutting
Finishes 50 - 70 Ra
Ideal for finish milling titanium & hi-temp alloy turbine blades on 5-Axis machines

Chip-Surfer
4RJ - End Mill Rod

Ø.315-1.001"
Chip Surfer Connection
Grades: IN04S, IN05S & IN06S

Chip-Surfer
4RJ - T-Slot Rod

Ø.543-1.401"
Chip Surfer Connection
Grade: IN30M

Chip-Surfer
C*T

C-Adapter (ISO 26623-1)
Chip Surfer Connection
Neck Relief
Quick Change Holder
AD Style with Ported Coolant delivery
Do not apply lubricant to the threaded connection.
*See Notes below

Chip-Surfer
C*T (Metric)

C-Adapter (ISO 26623-1)
Chip Surfer Connection
Neck Relief
Quick Change Holder
AD Style with Ported Coolant delivery
Do not apply lubricant to the threaded connection
*See Notes below

Chip-Surfer
CND - Flat Bot Drill/C'Bore

Ø.312-.750"
Chip Surfer Connection
1.2xD Drill Depth
2 Flute, Center-Cutting
Ideal for shallow drilling, counterboring & creating flat bottom in holes, even on inclined or uneven surfaces

Chip-Surfer
CND - Flat Bottom Drill/C'Bore

Ø8-20 mm
Chip Surfer Connection
1.2xD Drill Depth
2 Flute, Center-Cutting
Ideal for shallow drilling, counterboring & creating flat bottom in holes, even on inclined or uneven surfaces

Chip-Surfer
DIN69871*T (Metric)

DIN69871 V-Flange
Chip Surfer Connection
AD Style Coolant (coolant through the center)
Balanced G2.5@20,000 RPM
Do not apply lubricant to the threaded connection

Chip-Surfer
ER*T - Solid ER, Neck Relief

Solid ER in sizes 11, 16, 20, 25 & 32
Chip Surfer Connection
Neck Relief
Coolant Options

Chip-Surfer
HSKA*T

HSK-A (DIN 69893/A)
Chip Surfer Connection
Balanced G2.5@20,000 RPM
AD Style Coolant
Do not apply lubricant to the threaded connection
*See Notes below

Chip-Surfer
HSKA*T (Metric)

HSK-A (DIN 69893/A)
Chip Surfer Connection
Balanced G2.5@20,000 RPM
AD Style Coolant
Do not apply lubricant to threaded connection
*See Notes below

Chip-Surfer
Locking Keys CHIP SURFER

Locking Keys for series 16T & 17T T-Slot Tips

Chip-Surfer
S*T*CA - Carbide Shank, Necked

Cylindrical Shank (Metric)
Chip Surfer Connection
Neck Relief
Coolant options
Shank modifications can be made by cutting off the back to desired length or turning back neck for more usable length

Chip-Surfer
S*T*CA - Carbide Shank, Necked

Cylindrical Shank
Chip Surfer Connection
Neck Relief
Shank modifications can be made by cutting off the back to desired length or turning back neck for more usable length

Chip-Surfer
S*T*CA - Carbide Shank, No Neck

Cylindrical Shank
Chip Surfer Connection
No Neck Relief
Due to tolerance, shank diameter will be slightly larger than tip diameter. .010" per side neck modification required for clearance when milling 90° shoulder

Chip-Surfer
S*T*CA - Carbide Shank, No Neck

Cylindrical Shank (Metric)
Chip Surfer Connection
No Neck Relief
Coolant options
Due to tolerance, shank diameter will be slightly larger than tip diameter. .010" per side neck modification required for clearance when milling 90° shoulder

Chip-Surfer
S*T*CK - Carbide Shank, Cone Neck

Cylindrical Shank (Metric)
Chip Surfer Connection
Conical Neck

Chip-Surfer
S*T*CK - Carbide Shank, Cone Neck

Cylindrical Shank
Chip Surfer Connection
Conical Neck

Chip-Surfer
S*T*HA - Heavy Metal Shank, Necked

Cylindrical Shank (Metric)
Chip Surfer Connection
Neck Relief
Coolant options
Shank modifications can be made by cutting off the back to desired length or turning back neck for more usable length

Chip-Surfer
S*T*HA - Heavy Metal Shank, No Neck

Cylindrical Shank
Chip Surfer Connection
No Neck Relief
Due to tolerance, shank diameter will be slightly larger than tip diameter. .010" per side neck modification required for clearance when milling 90° shoulder

Chip-Surfer
S*T*HK - Heavy Metal, Cone Neck

Cylindrical Shank (Metric)
Chip Surfer Connection
Conical Neck
Coolant options

Chip-Surfer
S*T*HK - Heavy Metal, Cone Neck

Cylindrical Shank (Inch)
Chip Surfer Connection
Conical Neck
Coolant options

Chip-Surfer
S*T*NA - Steel Shank, Thrust Cool

Cylindrical Shank (Metric)
Chip Surfer Connection
Neck Relief
Thrust Cool System equipped with brazed Coolant Collar and Coolant Grooves for precise delivery down the Neck OD to the tip's cutting edges
Thrust Cool Shanks are ideal for use with carbide tips that do not have coolant holes

Chip-Surfer
S*T*NA - Steel Shank, Thrust Cool

Cylindrical Shank
Chip Surfer Connection
Neck Relief
Thrust Cool System equipped with brazed Coolant Collar and Coolant Grooves for precise delivery down the Neck OD to the tip's cutting edges
Thrust Cool Shanks are ideal for use with carbide tips that do not have coolant holes

Chip-Surfer
S*T*SA - Steel Shank, Necked

Cylindrical Shank
Chip Surfer Connection
Neck Relief
Shank modifications can be made by cutting off the back to desired length or turning back neck for more usable length

Chip-Surfer
S*T*SA - Steel Shank, Necked

Cylindrical Shank (Metric)
Chip Surfer Connection
Neck Relief
Coolant options
Shank modifications can be made by cutting off the back to desired length or turning back neck for more usable length

Chip-Surfer
S*T*SA - Steel Shank, No Neck

Cylindrical Shank (Metric)
Chip Surfer Connection
No Neck Relief
Coolant options
Due to tolerance, shank diameter will be slightly larger than tip diameter. .010" per side neck modification required for clearance when milling 90° shoulder

Chip-Surfer
S*T*SA - Steel Shank, No Neck

Cylindrical Shank
Chip Surfer Connection
No Neck Relief
Due to tolerance, shank diameter will be slightly larger than tip diameter. .010" per side neck modification required for clearance when milling 90° shoulder

Chip-Surfer
S*T*SA - Steel Weldon, Chamfered Neck

Weldon Shank (Metric)
Chip Surfer Connection
Neck Relief is either a Radius or Chamfer
Chamfer: 30°
Radius: 5.0 mm R

Chip-Surfer
S*T*SK - Steel Shank, Chamfered Neck

Cylindrical Shank (Metric)
Chip Surfer Connection
30° Chamfer Neck
Due to tolerance, shank diameter will be slightly larger than tip diameter. .010" per side neck modification required for clearance when milling 90° shoulder

Chip-Surfer
S*T*SK - Steel Shank, Cone Neck

Cylindrical Shank
Chip Surfer Connection
Conical Neck

Chip-Surfer
S*T*SK - Steel Shank, Cone Neck

Cylindrical Shank (Metric)
Chip Surfer Connection
Conical Neck

Chip-Surfer
S*T*VA - Anti Vibe Shank, Necked

Cylindrical Shank (Metric)
Chip Surfer Connection
Necked
Enables machining with larger overhang
Useful in deep cavity machining applications
Carbide body with built-in vibration-damping mechanism

Chip-Surfer
S*T*VA - Anti Vibe Shank, Necked

Cylindrical Shank
Chip Surfer Connection
Neck Relief
Enables machining with larger overhang
Useful in deep cavity machining applications
Carbide body with built-in vibration-damping mechanism

Chip-Surfer
S_T_K - Steel Weldon, Cone Neck

Flatted Cylindrical Shank (Metric)
Chip Surfer Connection
Conical Neck

Chip-Surfer
T_T_SA - Extension

Chip Surfer to Chip Surfer
Neck Relief

Chip-Surfer
T_T_SK - Reducer

Chip Surfer to Chip Surfer
Neck Relief

Chip-Surfer
Torque Wrench (Adjustable) CHIP SURFER

Adjustable Torque Handle, Wrench Heads, and Drivers for secure & accurate tightening of Chip Surfer Tips
Components are sold individually, and are not available as an assembly or a set

Chip-Surfer
Torque Wrench (Pre-Set) CHIP SURFER

Pre-Set Torque Wrench Handle with Replaceable Thin Open End Wrench Head that fits Chip Surfer tip wrench flats
No lubricant on adaption
Optional Accessory Item

Chip-Surfer
W*T*SA - Steel Weldon, Chamfered Neck

Weldon Shank
Chip Surfer Connection
Neck Relief is either a Radius or Chamfer
Chamfer: 30°
Radius: 0.197 - 0.236" R

Chip-Surfer
WB_T_K - Steel Weldon, Cone Neck

Cylindrical Shank with Flat
Chip Surfer Connection
Conical Neck

Chip-Surfer
Wrench CHIP SURFER

Thin Open End Wrenches for use with Chip Surfer tips
Do not use lubricant on adaption
When assembling, be sure tip is seated firmly on shank with no
Optional Accessory Item
Tip should seat firmly on shank with no gap when assembling

Cougar-Mill
5C2M - 60° Heavy Duty Face Mill

Ø4.00-14.00" (RH rotation)
.51" Depth of cut
20 mm Insert with 4 indexes
Finishes as good as 63 Ra
Wedge-held inserts with pocket protection
Power shear geometry ideally suited for hard materials, weld & interruptions

Cougar-Mill
5C2M_L - 60° Heavy Duty Face Mill

Ø8.00-14.00" (LH rotation)
.51" Depth of cut
20 mm Insert with 4 indexes
Finishes as good as 63 Ra
Wedge-held inserts with pocket protection
Power Shear geometry ideally suited for hard materials, weld & interruptions

Cougar-Mill
SPEN20_MR General Purpose

Milling Insert

Cougar-Mill
SPKN20_HD Heavy Duty

Milling Insert

Cougar-Mill
ZPKN20_HD Heavy Duty

Serrated Milling Insert

Cougar-Mill-HSHR
5C4M_L - 60° Heavy Duty HSHR Face Mill

Ø10.00-14.00" (LH rotation)
.484" Depth of cut
20 mm Insert with 4 indexes
Finishes as good as 63 Ra
Wedge-held inserts with pocket protection
Power shear geometry ideally suited for hard materials, weld & interruptions

Cougar-Mill-HSHR
5C4M_R - 60° Heavy Duty HSHR Face Mill

Ø4.00-14.00" (RH rotation)
.484" Depth of cut
20 mm Insert with 4 indexes
Finishes as good as 63 Ra
Wedge-held inserts with pocket protection
Power shear geometry ideally suited for hard materials, weld & interruptions

Cougar-Mill-HSHR
SEXN_L

Milling Insert

Cougar-Mill-HSHR
SEXN_R

Milling Insert

DiFeed-Deka
PNCQ08_ZNTN - Flat Top Hi-Feed Insert

Flat Top with strong edge
Ideal for interrupted cuts, mateirals with hard crust and vibration prone conditions
10 indexes

DiFeed-Deka
PNCT08 - Positive Hi-Feed Insert

Pressed rake face for efficient chip formation
5 indexes

DiFeedWinV
1TG1V - Hi-Feed End Mill

Ø1.250-1.500”
Weldon Shank
06 mm IC Insert with 4 indexes
1.0 mm (.040") Max. depth of cut
Double-Sided 4-corner Insert
Higher Ramp Down Angle with Secure 'V' Clamping for Improved Productivity

DiFeedWinV
1TG1V - Hi-Feed End Mill

Ø.625-1.500”
TopOn Connection
06 mm IC Insert with 4 indexes
1.0 mm (.040") Max. depth of cut
Double-Sided 4-corner Insert
Higher Ramp Down Angle with Secure 'V' Clamping for Improved Productivity

DiFeedWinV
1TG1V - Hi-Feed End Mill

Ø.625-1.000”
Chip Surfer Connection
06 mm IC Insert with 4 indexes
1.0 mm (.040") Max. depth of cut
Double-Sided 4-corner Insert
Higher Ramp Down Angle with Secure 'V' Clamping for Improved Productivity

DiFeedWinV
1TG1V - Hi-Feed End Mill

Ø.625-1.000”
Cylindrical Shank
06 mm IC Insert with 4 indexes
1.0 mm (.040") Max. depth of cut
Double-Sided 4-corner Insert
Higher Ramp Down Angle with Secure 'V' Clamping for Improved Productivity

DiFeedWinV
TG1V - Hi-Feed Face Mill

Ø2.000-2.500”
06 mm IC Insert with 4 indexes
1.0 mm (.040") Max. depth of cut
Double-Sided 4-corner Insert
Higher Ramp Down Angle with Secure 'V' Clamping for Improved Productivity

DiFeedWinV
UNLV0603M0TR, 06 mm IC Hi-Feed Insert

V-Shaped Contact Face
Multi-Purpose
4 Indexes

DiFeedWinV
UNLV0603M0TR-ML, 06 mm IC Hi-Feed Insert

V-Shaped Contact Face
High Positive, Keen Edge
4 Indexes

DiFeedWinV
UNLV0603M0TR-MM, 06 mm IC Hi-Feed Insert

V-Shaped Contact Face
Multi-Purpose, Keen Edge
4 Indexes

DiPos-Deka
1DM1E - Lead Angle End Mill

Ø16.00 - 40.00mm
TopOn Connection
3.8mm Depth of cut
5 mm Insert with 10 indexes
32-63 Ra surface finishes when engaging the wiper (WEP)
Insert corners: 0.50mm

DiPos-Deka
4W2A - 70° Cartridge Face Mill

Ø8.00-12.00"
.23" Depth of cut
Finishes as good as 20 Ra when using wiper in one pocket
8 mm Insert with 10 indexes
Cartridge pocket protection (sold separatly)
Great price-per-edge economy!

DiPos-Deka
DM2Q - 70° Heavy Duty Face Mill

Ø6.00-12.00"
.50" Depth of cut
17 mm Insert with 10 indexes
Pocket protection with screw-held seat
32-63 Ra surface finishes when engaging the wiper (WEP)
Great Price-per-Edge economy!

DiPos-Deka
DM5E / DM6E - 66° Lead Angle Face Mill

Ø32.00 - 80.00mm
3.8mm Depth of cut
5 mm Insert with 10 indexes
32-63 Ra surface finishes when engaging the wiper (WEP)
Insert corners: 0.50mm

DiPos-Deka
DM5G, DM6G - 70° Face Mill

Ø1.50-8.00"
.23" Depth of cut
8 mm Insert with 10 indexes
Finishes as good as 20 Ra when using wiper in one pocket
Carbide & SiN options
Great price-per-edge economy!

DiPos-Deka
DM5G, DM6G - 70° Face Mill (Metric)

Ø40.00 - 160.00mm
6.00mm Depth of cut
8 mm Insert with 10 indexes
Finishes as good as 20 Ra when using wiper in one pocket
Carbide & SiN options
Great price-per-edge economy!

DiPos-Deka
DM5Q, DM6Q - 70° Heavy Duty Face Mill

Ø3.00-12.00"
.50" Depth of cut
17 mm Insert with 10 indexes
32-63 Ra surface finishes when engaging the wiper (WEP)
Great price-per-edge economy!

DiPos-Deka
PNCQ17 - Flat Top Insert

Flat Top with strong edge
Ideal for interrupted cuts, mateirals with hard crust and vibration prone conditions
10 indexes

DiPos-Deka
PNCU05_FR-P - Non-Ferrous Insert

Pressed rake face geometry promotes efficient chip formation
Integrated wiper flat produces surface finishes as good as 32 Ra
Designed for multiple materials and facing applications
Carbide and SiN options
10 indexes

DiPos-Deka
PNCU08 - Multi-Purpose Insert

Pressed rake face geometry promotes efficient chip formation
Integrated wiper flat produces surface finishes as good as 32 Ra
Designed for multiple materials and facing applications
Carbide and SiN options
10 indexes

DiPos-Deka
PNCU08_GNR - SiN Insert

Pressed rake face geometry promotes efficient chip formation
Integrated wiper flat produces surface finishes as good as 32 Ra
Designed for iron on facing applications
10 indexes

DiPos-Deka
PNCU08_HS - Insert for SS/Hi-Temps

Keen Edge for SS / Hi-Temp / Ti
Integrated wiper flat produces surface finishes as good as 32 Ra
Pressed rake face geometry promotes efficient chip formation
10 indexes

DiPos-Deka
PNCU08-W - Wiper Insert

Long wiper flat produces surface finishes as good as 20 Ra when placed in one pocket
Remaining pockets to be loaded with _GNTR or -HS
Pressed rake face geometry promotes efficient chip formation
Designed for utmost surface finishes on Steel, Iron, SS & Hi-Temps
2 indexes

DiPos-Deka
PNCU17 - Multi-Purpose Insert

Pressed rake face geometry promotes efficient chip formation
Integrated wiper flat produces surface finishes as good as 20 Ra
Designed for multiple materials and facing applications
J hone for light duty cuts
E hone for high horse power cuts
10 indexes

DiPos-Deka
PNMU05 - Multi-Purpose Insert

Pressed rake face geometry promotes efficient chip formation
Integrated wiper flat produces surface finishes as good as 32 Ra
Designed for multiple materials and facing applications
Carbide and SiN options
10 indexes

DiPosDuo
1TJ1B - 90° & Hi-Feed End Mill

Ø10-25 mm
TopOn Connection
4 mm Insert with 4 indexes
90°: 3.5 mm DOC, Hi-Feed: 0.5 mm DOC
32-63 Ra surface finishes when engaging the wiper (WEP)
Insert corners: 0.2, 0.4, 0.8mm R & Hi-Feed

DiPosDuo
1TJ1B - 90° & Hi-Feed End Mill

Ø.500-1.000"
Chip Surfer Connection
4mm Insert with 4 indexes
90°: .14" DOC, Hi-Feed: .019" DOC
32-63 Ra surface finishes when engaging the wiper (WEP)
Insert corners: .008" .015" .031" R & Hi-Feed

DiPosDuo
1TJ1B - 90° & Hi-Feed End Mill

Ø.500-1.000"
TopOn Connection
4 mm Insert with 4 indexes
90° DOC: 0.14" , Hi-Feed DOC: 0.019"
32-63 Ra surface finishes when engaging the wiper (WEP)
Insert corners: .008" .015" .031" R & Hi-Feed

DiPosDuo
1TJ1B - 90° & Hi-Feed End Mill

Ø.750-1.500"
Weldon Shank
4 mm Insert with 4 indexes
90°: .14" DOC, Hi-Feed: .019" DOC
32-63 Ra surface finishes when engaging the wiper (WEP)
Insert corner: .008" .015" .031" R & Hi-Feed

DiPosDuo
1TJ1B - 90° & Hi-Feed End Mill

Ø.500-1.000"
Cylindrical Shank
4 mm Insert with 4 indexes
90°: .14" DOC, Hi-Feed: .019" DOC
32-63 Ra surface finishes when engaging the wiper (WEP)
Insert corners: .008" .015" .031" R & Hi-Feed

DiPosDuo
1TJ1D - 90° Backdraft & Hi-Feed End Mill

Ø.625-1.500"
Weldon Shank
6 mm Insert with 4 indexes
Insert corners: .015" .031" .039" .047" .059" .062".079" R & Hi-Feed
32-63 Ra finish w/ integrated wiper (WEP)
63-125 Ra finish w/o wiper
Backdraft insert option to reduce vibration for long reach applications
.24" Depth of cut

DiPosDuo
1TJ1D - 90° Backdraft & Hi-Feed End Mill

Ø.625-1.000"
Chip Surfer Connection
6 mm Insert with 4 indexes
Insert corners: .015" .031" .039" .047" .059" .062".079" R & Hi-Feed
32-63 Ra finishes when using insert with integrated wiper (WEP). 63-125 Ra finishes when using insert with no integrated wiper
Backdraft insert option to reduce vibration for long reach applications
.24" Depth of cut

DiPosDuo
1TJ1D - 90° Backdraft & Hi-Feed End Mill

Ø.625-1.500"
Cylindrical Shank
6 mm Insert with 4 indexes
Insert corners: .015" .031" .039" .047" .059" .062".079" R & Hi-Feed
32-63 Ra finishes when using insert with integrated wiper (WEP). 63-125 Ra finishes when using insert with no integrated wiper
Backdraft insert option to reduce vibration for long reach applications
.24" Depth of cut

DiPosDuo
1TJ1D - 90° Backdraft & Hi-Feed End Mill

Ø.750-1.500"
TopOn Connection
6 mm Insert with 4 indexes
Insert corners: .015" .031" .039" .047" .059" .062".079" R & Hi-Feed
32-63 Ra finishes when using insert with integrated wiper (WEP). 63-125 Ra finishes when using insert with no integrated wiper
Backdraft insert option to reduce vibration for long reach applications
.24" Depth of cut

DiPosDuo
1TJ1D - 90° B-Draft & Hi-Feed

Ø16-25 mm
Chip Surfer Connection
6 mm Insert with 4 indexes
6 mm Depth of cut
Insert corners: 0.4, 0.8, 1.0, 1.2, 1.5, 1.6, 2.0 mm R & Hi-Feed
32-63 Ra finishes when using insert with integrated wiper (WEP). 63-125 Ra finishes when using insert without wiper
Backdraft insert option to reduce vibration for long reach applications

DiPosDuo
1TJ1D - 90° B-Draft & Hi-Feed End Mill

Ø16-40 mm
TopOn Connection
6 mm Insert with 4 indexes
Insert corners: 0.4, 0.8, 1.0, 1.2, 1.5, 1.6, 2.0mm R & Hi-Feed
32-63 Ra finish w/ integrated wiper (WEP)
63-125 Ra finish w/o wiper
Backdraft insert option to reduce vibration for long reach applications
6mm Depth of Cut

DiPosDuo
1TJ1D - 90° B-Draft & Hi-Feed End Mill

Ø16-32 mm
Weldon Shank (Metric)
6 mm Insert with 4 indexes
Insert corners: 0.4, 0.8, 1.0, 1.2, 1.5, 1.6, 2.0mm R & Hi-Feed
32-63 Ra finish w/ wiper (WEP)
63-125 Ra finish w/o wiper
Backdraft insert option to reduce vibration for long reach applications
6mm Depth of Cut

DiPosDuo
1TJ1D - 90° End Mill for Knee Mills

Ø2.50-3.00"
Bridgeport Connection
6 mm Insert with 4 indexes
.24" Depth of cut
Insert corners: .015" .031" .039" .047" .059" .062".079" R & Hi-Feed
32-63 Ra finishes when using insert with integrated wiper (WEP). 63-125 Ra finishes when using insert with no integrated wiper

DiPosDuo
1TJ1D - 90° End Mill for Knee Mills

Ø1.00-2.00"
Cylindrical Shank
6 mm Insert with 4 indexes
Insert corners: .015" .031" .039" .047" .059" .062".079" R & Hi-Feed
32-63 Ra finish w/ integrated wiper (WEP)
63-125 Ra finish w/o wiper
.24" Depth of cut

DiPosDuo
1TJ1F - 90° & Hi-Feed End Mill

Ø1.000-1.500"
Cylindrical Shank
9 mm Insert with 4 indexes
90°: .32" DOC, Hi-Feed: .059" DOC
Insert corners: .015" .031" .062" R & Hi-Feed
32-63 Ra finishes when using insert with integrated wiper (WEP).
63-125 Ra finishes when using insert with no integrated wiper

DiPosDuo
1TJ1F - 90° & Hi-Feed End Mill

Ø1.000-1.500"
TopOn Connection
9 mm Insert with 4 indexes
90°: .32" DOC, Hi-Feed: .059" DOC
Insert corners: .015" .031" .062" R & Hi-Feed
32-63 Ra finishes when using insert with integrated wiper (WEP).
63-125 Ra finishes when using insert with no integrated wiper

DiPosDuo
1TJ1F - 90° & Hi-Feed End Mill

Ø20-40 mm
TopOn Connection
9 mm Insert with 4 indexes
90°: 8mm DOC, Hi-Feed: 1.5 mm DOC
Insert corners: 0.4, 0.8, 1.6 mm R & Hi-Feed
32-63 Ra finishes when using insert with integrated wiper (WEP).
63-125 Ra finishes when using insert with no integrated wiper

DiPosDuo
1TJ1F - 90° & Hi-Feed End Mill

Ø20-32 mm
Weldon Shank (Metric)
9 mm Insert with 4 indexes
90°: 8 mm DOC, Hi-Feed: 1.5 mm DOC
Insert corners: 0.4, 0.8, 1.6 mm R & Hi-Feed
32-63 Ra finishes when using insert with integrated wiper (WEP)
63-125 Ra finishes when using insert with no integrated wiper

DiPosDuo
1TJ1F - 90° & Hi-Feed End Mill

Ø1.000-1.500"
Weldon Shank
9 mm Insert with 4 indexes
90°: .32" DOC, Hi-Feed: .059" DOC
Insert corners: .015", .031", .062" R & Hi-Feed
32-63 Ra finishes when using insert with integrated wiper (WEP)
63-125 Ra finishes when using insert with no integrated wiper

DiPosDuo
1TJ1G - 90° & Hi-Feed End Mill

Ø1.000-1.500"
TopOn Connection
11 mm Insert with 4 indexes
90°: .41" DOC, Hi-Feed: .078" DOC
Insert corners: .031" .062" .094" R & Hi-Feed
32-63 Ra finishes when using insert with integrated wiper (WEP)
63-125 Ra finishes when using insert with no integrated wiper

DiPosDuo
1TJ1G - 90° & Hi-Feed End Mill

Ø1.000-1.500"
Weldon Shank
11 mm Insert with 4 indexes
90°: .41" DOC, Hi-Feed: .078" DOC
Insert corners: .031" .062" .094" R & Hi-Feed
32-63 Ra finishes when using insert with integrated wiper (WEP)
63-125 Ra finishes when using insert with no integrated wiper

DiPosDuo
1TJ1G - 90° & Hi-Feed End Mill

Ø25-40 mm
TopOn Connection
11 mm Insert with 4 indexes
90°: 10.5 mm DOC, Hi-Feed: 2.0 mm DOC
Insert corners: 0.8mm, 1.6mm 2.4mm R & Hi-Feed
32-63 Ra finishes when using insert with integrated wiper (WEP)
63-125 Ra finishes when using insert with no integrated wiper

DiPosDuo
1TJ1G - 90° & Hi-Feed End Mill

Ø25-32 mm
Weldon Shank (Metric)
11 mm Insert with 4 indexes
90°: 10.5 mm DOC, Hi-Feed: 2 mm DOC
Insert corners: 0.8mm, 1.6mm 2.4mm R & Hi-Feed
32-63 Ra finishes when using insert with integrated wiper (WEP)
63-125 Ra finishes when using insert with no integrated wiper

DiPosDuo
1TJ1J - 90° & Hi-Feed End Mill

Ø1.250-1.500"
TopOn Connection
14 mm Insert with 4 indexes
90°: .54" DOC, Hi-Feed: .118" DOC
Insert corners: .031" R & Hi-Feed
32-63 Ra finishes when using insert with integrated wiper (WEP)
63-125 Ra finishes when using insert with no integrated wiper

DiPosDuo
1TJ1J - 90° & Hi-Feed End Mill

Ø1.250-1.500"
Weldon Shank
14 mm Insert with 4 indexes
90°: .54" DOC, Hi-Feed: .118" DOC
Insert corners: .031" R & Hi-Feed
32-63 Ra finishes when using insert with integrated wiper (WEP)
63-125 Ra finishes when using insert with no integrated wiper

DiPosDuo
1TV1D - Backdraft End Mill

Ø.625-1.000"
Chip Surfer Connection
6 mm Insert with 4 indexes
Backdraft with single point diameter contact lowers radial forces, ideal for long reach side wall finishing
Insert corners: .015", .031", .047", .062" & .079" R

DiPosDuo
MNCU06_P - Insert for Alum, Face Wiper

Pressed rake face geometry promotes efficient chip formation
Sharp edge & polished rake face for non-ferrous materials
Integrated wiper flat on face for producing 32-63 Ra surface finishes
To be loaded in all pockets of the cutter
4 Indexes

DiPosDuo
MNCU09_AL - Insert for Alum, Face Wiper

Pressed rake face geometry promotes efficient chip formation
Sharp edge & polished rake face for non-ferrous materials
Integrated wiper flat on face for producing 32-63 Ra surface finishes
4 Indexes

DiPosDuo
MNCU11_AL - Insert for Alum, Face Wiper

Pressed rake face geometry promotes efficient chip formation
Sharp edge & polished rake face for non-ferrous materials
Integrated wiper flat on face for producing 32-63 Ra surface finishes
4 Indexes

DiPosDuo
MNCU14_AL - Insert for Alum, Face Wiper

Pressed rake face geometry promotes efficient chip formation
Sharp edge & polished rake face for non-ferrous materials
Integrated wiper flat on face for producing 32-63 Ra surface finishes
4 Indexes

DiPosDuo
MNHU04_M - Multi-Purpose Insert

Pressed rake face geometry promotes efficient chip formation
Designed for multiple materials and applications
4 Indexes

DiPosDuo
MNHU06 - Multi-Purpose Insert

Pressed rake face geometry promotes efficient chip formation
Designed for multiple materials and applications
4 Indexes

DiPosDuo
MNHU06_HW - SS/Hi-Temp/Ti, Face Wiper

Pressed rake face geometry promotes efficient chip formation
Integrated wiper flat on face for producing 32-63 Ra surface finishes
To be loaded in all pockets of the cutter
4 Indexes

DiPosDuo
MNHU06_PH - Insert for SS/Hi-Temp/Ti

Keen edge for SS/Hi-Temp/Ti
Pressed rake face geometry promotes efficient chip formation
4 Indexes

DiPosDuo
MNHU06_SW - Backdraft, OD Wiper

Pressed rake face geometry promotes efficient chip formation.
Integrated wiper flat on OD for producing superior surface finishes.
Backdrafted to minimize radial forces in long reach applications
Ideal for finishing hardened steel > Rc 50
4 Indexes

DiPosDuo
MNHU09_M - Multi-Purpose Insert

Pressed rake face geometry promotes efficient chip formation
Designed for multiple materials and applications
4 Indexes

DiPosDuo
MNHU09_ML - SS/Hi-Temp/Ti, Face Wiper

Keen edge for SS/Hi-Temp/Ti
Pressed rake face geometry promotes efficient chip formation
Integrated wiper flat on face for producing surface finishes as good as 40 Ra
4 Indexes

DiPosDuo
MNHU11_M - Multi-Purpose Insert

Pressed rake face geometry promotes efficient chip formation
Designed for multiple materials and applications
4 Indexes

DiPosDuo
MNHU11_PNR-M - Multi-Purpose/Face Wiper

Pressed rake face geometry promotes efficient chip formation
Integrated wiper flat on face for producing surface finishes as good as 32 Ra
Designed for multiple materials and applications
4 Indexes

DiPosDuo
MNHU14_M - Multi-Purpose Insert

Pressed rake face geometry promotes efficient chip formation
Designed for multiple materials and applications
4 Indexes

DiPosDuo
MNHU14_PNR-M - Multi-Purpose/Face Wiper

Pressed rake face geometry promotes efficient chip formation
Integrated wiper flat on face for producing surface finishes as good as 32 Ra
Designed for multiple materials and applications
4 Indexes

DiPosDuo
TJ1D - 90° Backdraft & Hi-Feed Face Mill

Ø1.500-3.000"
6 mm Insert with 4 indexes
.24" Depth of Cut
Insert corners: .015" .031" .039" .047" .059" .062".079" R & Hi-Feed
32-63 Ra finish w/ integrated wiper (WEP)
63-125 Ra finish w/o wiper
Backdraft insert option to reduce vibration for long reach applications

DiPosDuo
TJ1D - 90° B-Draft & Hi-Feed Face Mill

Ø32-63 mm
6 mm Insert with 4 indexes
6 mm Depth of Cut
Insert corners: 0.4, 0.8, 1.0, 1.2, 1.5, 1.6, 2.0mm R & Hi-Feed
32-63 Ra finish w/ integrated wiper (WEP).
63-125 Ra finish w/o wiper
Backdraft insert option to reduce vibration for long reach applications

DiPosDuo
TJ5F - 90° & Hi-Feed Face Mill

Ø40-80 mm
9 mm Insert with 4 indexes
8 mm 90° Depth of Cut
1.5 mm Hi-Feed Depth of Cut
Insert corners: 0.4, 0.8, 1.6mm R & Hi-Feed
32-63 Ra finish w/ integrated wiper (WEP)
63-125 Ra finish w/o wiper

DiPosDuo
TJ5G TJ6G - 90° & Hi-Feed Face Mill

Ø40-100 mm
11 mm Insert with 4 indexes
10.5 mm 90° Depth of Cut
2.0 mm Hi-Feed Depth of Cut
Insert corners: 0.8 mm, 1.6 mm 2.4 mm R & Hi-Feed
32-63 Ra finish w/ integrated wiper (WEP)
63-125 Ra finish w/o wiper

DiPosDuo
TJ5G TJ6G - 90° & Hi-Feed Face Mill

Ø2.000-4.000"
11 mm Insert with 4 indexes
.41" 90° Depth of Cut
.078" Hi-Feed Depth of Cut
Insert corners: .031" .062" .094" R & Hi-Feed
32-63 Ra finish w/ integrated wiper (WEP)
63-125 Ra finish w/o wiper

DiPosDuo
TJ5J TJ6J - 90° & Hi-Feed Face Mill

Ø2.000-4.000"
14 mm Insert with 4 indexes
.54" 90° Depth of Cut
.118" Hi-Feed Depth of Cut
Insert corners: .031" R & Hi-Feed
32-63 Ra finish w/ integrated wiper (WEP)
63-125 Ra finish w/o integrated wiper

DiPosDuo
TJ5J TJ6J - 90° & Hi-Feed Face Mill

Ø50-125 mm
14 mm Insert with 4 indexes
13.8 mm 90° Depth of Cut
3.0 mm Hi-Feed Depth of Cut
Insert corners: 0.8 mm R & Hi-Feed
32-63 Ra finish w/ integrated wiper (WEP)
63-125 Ra finish w/o integrated wiper

DiPosDuo
TJ6F - 90° & Hi-Feed Face Mill

Ø1.500-4.000"
9 mm Insert with 4 indexes
.32" 90° Depth of Cut
.059" Hi-Feed Depth of Cut
Insert corners: .015" .031" 062" R & Hi-Feed
32-63 Ra finish w/ integrated wiper (WEP)
63-125 Ra finish w/o integrated wiper

DiPosDuo
UNHU04_HF - Hi-Feed Insert

Insert fits same MNHU04 pocket for Hi-Feed milling applications
Pressed rake face geometry promotes efficient chip formation
Designed for multiple materials and applications
4 Indexes

DiPosDuo
UNHU06_HF - Hi-Feed Insert

Insert fits same MNHU06 pocket for Hi-Feed milling applications
Pressed rake face geometry promotes efficient chip formation
Designed for multiple materials and applications
4 Indexes

DiPosDuo
UNHU09_HF - Hi-Feed Insert

Insert fits same MNHU09 pocket for Hi-Feed milling applications
Pressed rake face geometry promotes efficient chip formation
Designed for multiple materials and applications
4 Indexes

DiPosDuo
UNHU11_HF - Hi-Feed Insert

Insert fits same MNHU11 pocket for Hi-Feed milling applications
Pressed rake face geometry promotes efficient chip formation
Designed for multiple materials and applications
4 Indexes

DiPosDuo
UNHU14_HF - Hi-Feed Insert

Insert fits same MNHU14 pocket for Hi-Feed milling applications
Pressed rake face geometry promotes efficient chip formation
Designed for multiple materials and applications
4 Indexes

DiPosFeed
1TG1B - Hi-Feed End Mill

Ø.312-1.000”
Cylindrical Shank
4 mm IC Insert with 4 indexes
.5 mm (.020") Max. depth of cut
Two different insert edge preparations provide application flexibility
Excellent high-feed performance & economy!

DiPosFeed
1TG1B - Hi-Feed End Mill

Ø10-25 mm
Cylindrical Shank (Metric)
4 mm IC Insert with 4 indexes
.5 mm (.020") Max. depth of cut
Two different insert edge preparations provide application flexibility
Excellent high-feed performance & economy!

DiPosFeed
1TG1B - Hi-Feed End Mill

Ø.394-1.250”
TopOn Connection
4 mm IC Insert with 4 indexes
.5 mm (.020") Max. depth of cut
Two different insert edge preparations provide application flexibility
Excellent hi-feed performance & economy!

DiPosFeed
1TG1B - Hi-Feed End Mill

Ø.394-1.00"
Chip Surfer Connection
4 mm IC Insert with 4 indexes
.5 mm (.020") Max. depth of cut
Two different insert edge preparations provide application flexibility
Excellent hi-feed performance & economy!

DiPosFeed
1TG1B - Hi-Feed End Mill

Ø10-32 mm
TopOn Connection
4 mm IC Insert with 4 indexes
.5 mm (.020") Max. depth of cut
Two different insert edge preparations provide application flexibility
Excellent high feed performance & economy!

DiPosFeed
1TG1B - Hi-Feed End Mill

Ø10-25 mm
Chip Surfer Connection
4 mm IC Insert with 4 indexes
.5 mm (.020") Max. depth of cut
Two different insert edge preparations provide application flexibility
Excellent hi-feed performance & economy!

DiPosFeed
1TG1F - Hi-Feed End Mill

Ø.625-1.250”
Cylindrical Shank (Inch & Metric)
.040" Max. depth of cut
6 mm IC Insert with 4 indexes
Three different insert edge preparations provide application flexibility
Excellent high-feed performance & economy!

DiPosFeed
1TG1F - Hi-Feed End Mill

Ø16-30 mm
Cylindrical Shank (Metric)
6 mm IC Insert with 4 indexes
.040" Max. depth of cut
Three different insert edge preparations provide application flexibility
Excellent high-feed performance & economy!

DiPosFeed
1TG1F - Hi-Feed End Mill

Ø.62-1.00"
Chip Surfer Connection
6 mm IC Insert with 4 indexes
.040" Max. depth of cut
Three different insert edge preparations provide application flexibility
Excellent hi-feed performance & economy

DiPosFeed
1TG1F - Hi-Feed End Mill

Ø.625-1.500”
TopOn Connection
6 mm IC Insert with 4 indexes
.040" Max. depth of cut
Three different insert edge preparations provide application flexibility
Excellent hi-feed performance & economy!

DiPosFeed
1TG1F - Hi-Feed End Mill

Ø16-30 mm
TopOn Connection
6 mm IC Insert with 4 indexes
.040" Max. depth of cut
Three different insert edge preparations provide application flexibility
Excellent high feed performance & economy!

DiPosFeed
1TG1F - Hi-Feed End Mill (Weldon)

Ø1.25-1.500”
Weldon Shank
6 mm IC Insert with 4 indexes
.040" Max. depth of cut
Three different insert edge preparations provide application flexibility
Excellent hi-feed performance & economy!

DiPosFeed
1TG1G - Hi-Feed End Mill

Ø1.250-1.500”
Weldon Shank (Extended)
9 mm IC Insert with 4 indexes
1.5 mm (.059") Max. depth of cut
Three different insert edge preparations provide application flexibility
Excellent hi-feed performance & economy!

DiPosFeed
1TG1G - Hi-Feed End Mill

Ø25-32 mm
Cylindrical Shank (Metric)
9 mm IC Insert with 4 indexes
1.5 mm (.059") Max. depth of cut
Three different insert edge preparations provide application flexibility.
Excellent hi-feed performance & economy!

DiPosFeed
1TG1G - Hi-Feed End Mill

Ø25-35 mm
TopOn Connection
9 mm IC Insert with 4 indexes
1.5 mm (.059") Max. depth of cut
Three different insert edge preparations provide application flexibility
Excellent hi-feed performance & economy!

DiPosFeed
1TG1G - Hi-Feed End Mill

Ø1.00-1.500”
TopOn Connection
9 mm IC Insert with 4 indexes
1.5 mm (.059") Max. depth of cut
Three different insert edge preparations provide application flexibility
Excellent hi-feed performance & economy!

DiPosFeed
1TG1G - Hi-Feed End Mill

Ø1.000”
Cylindrical Shank
9 mm IC Insert with 4 indexes
1.5 mm (.059") Max. depth of cut
Three different insert edge preparations provide application flexibility.
Excellent hi-feed performance & economy!

DiPosFeed
1TG1J - Hi-Feed End Mill

Ø1.250-1.50”
Weldon Shank (Extended)
11 mm IC Insert with 4 indexes
2 mm (.078") Max. depth of cut
Two different insert edge preparations provide application flexibility
Excellent high-feed performance & economy!

DiPosFeed
1TG1J - Hi-Feed End Mill

Ø30-42 mm
TopOn Connection
11 mm IC Insert with 4 indexes
2 mm (.078") Max. depth of cut
Two different insert edge preparations provide application flexibility
Excellent high-feed performance & economy!

DiPosFeed
1TG1J - Hi-Feed End Mill

Ø1.250 - 1.500”
TopOn Connection
11 mm IC Insert with 4 indexes
2 mm (.078") Max. depth of cut
Two different insert edge preparations provide application flexibility
Excellent high-feed performance & economy!

DiPosFeed
TG1F - Hi-Feed Face Mill

Ø2.000”
1 mm (.039") Max. depth of cut
6 mm IC insert with 4 indexes
Three different insert edge preparations provide application flexibility
Excellent hi-feed performance & economy!

DiPosFeed
TG1F - Hi-Feed Face Mill (Metric)

Ø40-63 mm
6 mm IC insert with 4 indexes
1 mm (.039") Max. depth of cut
Three different insert edge preparations provide application flexibility
Excellent hi-feed performance & economy!

DiPosFeed
TG1G, TG2G - Hi-Feed Face Mill

Ø2.000-3.000”
9 mm IC Insert with 4 indexes
1.5 mm (.059") Max. depth of cut
Three different insert edge preparations provide application flexibility
Excellent hi-feed performance & economy!

DiPosFeed
TG1G,TG2G,TG3G,TG4G - Hi-Feed Face Mill

Ø40-80 mm
9 mm IC Insert with 4 indexes
1.5 mm (.059") Max. depth of cut
Three different insert edge preparations provide application flexibility
Excellent hi-feed performance & economy!

DiPosFeed
TG1J, TG2J - Face Mill

Ø50-100 mm
11 mm IC Insert with 4 indexes
2.0 mm (.078") Max. depth of cut
Three different insert edge preparations provide application flexibility
Excellent Hi-Feed performance & economy!

DiPosFeed
TG1J, TG2J - Hi-Feed Face Mill

Ø2.000-4.000”
11 mm IC Insert with 4 indexes
2.0 mm (.078") Max. depth of cut
Three different insert edge preparations provide application flexibility
Excellent hi-feed performance & economy!

DiPosFeed
UNLU0402M0TR, 4 mm IC Hi-Feed Insert

Multi-Purpose
Ideal for ferrous materials
4 Indexes

DiPosFeed
UNLU0402M0TR-ML, 4 mm IC Hi-Feed Insert

Multi-Purpose
Ideal for ferrous materials
4 Indexes

DiPosFeed
UNLU0603M0TR, 6 mm IC Hi-Feed Insert

Multi-Purpose
Ideal for ferrous materials
4 Indexes

DiPosFeed
UNLU0603M0TR-ML, 6 mm IC Hi-Feed Insert

High-Positive - Keen Edge
Ideal for ferrous materials
4 Indexes

DiPosFeed
UNLU0603M0TR-MM, 6 mm IC Hi-Feed Insert

Multi-Purpose - Keen Edge
Ideal for ferrous materials
4 Indexes

DiPosFeed
UNLU0904M0TR, 9 mm IC Hi-Feed Insert

Multi-Purpose
Ideal for ferrous materials
4 Indexes

DiPosFeed
UNLU0904M0TR-ML, 9 mm IC Hi-Feed Insert

Multi-Purpose - Keen Edge
Ideal for ferrous materials
4 Indexes

DiPosFeed
UNLU0904M0TR-MM, 9 mm IC Hi-Feed Insert

Multi-Purpose - Keen Edge
Ideal for ferrous materials
4 Indexes

DiPosFeed
UNLU1105M0TR, 11 mm IC Hi-Feed Insert

Multi-Purpose
Ideal for ferrous materials
4 Indexes

DiPosFeed
UNLU1105M0TR-ML, 11 mm IC Hi-Feed Insert

Multi-Purpose
Ideal for ferrous materials
4 Indexes

DiPosFinishT
ANED12_AL - Insert for non-ferrous

Pressed rake face geometry promotes efficient chip evacuation
Crowned wiper produces surface finishes as good as 3 Ra
Sharp & polished for aluminum & other non-ferrous materials
4 Indexes

DiPosFinishT
ANED12_CBN - CBN Tipped Insert

Positive rake face geometry promotes efficient chip evacuation
Crowned wiper produces surface finishes as good as 3 Ra
1 Index

DiPosFinishT
ANED12_ML - Carbide & Cermet Inserts

Pressed rake face geometry promotes efficient chip evacuation
Crowned wiper produces surface finishes as good as 3 Ra
Designed for multiple materials and applications
4 Indexes

DiPosFinishT
ANED12_PCD - PCD Tipped Insert

Positive rake face geometry promotes efficient chip evacuation
Crowned wiper produces surface finishes as good as 3 Ra
1 Index

DiPosFinishT
TA3Q - Fixed Pocket Finish Face Mill

Ø2.000-6.000"
12 mm Insert with up to 4 indexes
.020" Max. Depth of Cut (.012" Min. depth of cut)
Non-adjusting design reduces set up time
Long crowned wiper produces 3-15 Ra surface finish
Stepped insert orientation alleviates axial & radial forces
Can mill up to 90° shoulder
Carbide, CBN & PCD insert offering for a wide variety of materials

DiPos-Hexa
HN5D, HN6D - 45° Face Mill

Ø40-160 mm
6 mm Insert with 12 indexes
3 mm Depth of cut
32-63 Ra surface finishes
Great price-per-edge economy!

DiPos-Hexa
HN5D, HN6D - 45° Face Mill

Ø1.50-6.00"
.11" Depth of cut
6 mm Insert with 12 indexes
32-63 Ra surface finishes
Great price-per-edge economy!

DiPos-Hexa
HN5G, HN6G - 45° Face Mill

Ø2.50-10.00"
.20" Depth of cut
10mm Insert with 12 indexes
32-63 Ra surface finishes
Great price-per-edge economy!

DiPos-Hexa
HN5G, HN6G - 45° Face Mill

Ø63-250 mm
10 mm Insert with 12 indexes
5 mm Depth of cut
32-63 Ra surface finishes
Great price-per-edge economy!

DiPos-Hexa
HNGU06_M - Medium Roughing Insert

Pressed rake face geometry promotes efficient chip formation
Integrated wiper flats
Designed for multiple materials and applications
12 indexes

DiPos-Hexa
HNGU06_ML - SS/Hi-Temp/Ti

Pressed rake face geometry promotes efficient chip formation
Integrated wiper flats
Keen edge for giummy materials
12 indexes

DiPos-Hexa
HNGU06_MM - Medium Positive Insert

Pressed rake face geometry promotes efficient chip formation
Integrated wiper flats
Extra positive rake face geometry
12 indexes

DiPos-Hexa
HNGU10_HR - Heavy Roughing Insert

Pressed rake face geometry promotes efficient chip formation
Integrated wiper flats
Integrated wiper
Strengthened Edge for abusive conditions & aggressive chiploads
12 indexes

DiPos-Hexa
HNGU10_M - Medium Roughing Insert

Pressed rake face geometry promotes efficient chip formation
Integrated wiper flats
Integrated wiper
Designed for multiple materials and applications
12 indexes

DiPos-Hexa
HNGU10_ML - SS/Hi-Temp/Ti

Pressed rake face geometry promotes efficient chip formation
Integrated wiper flats
Integrated wiper
Keen Edge for gummy materials
12 indexes

DiPos-Hexa
HNGU10_MM - Medium Positive Insert

Pressed rake face geometry promotes efficient chip formation
Integrated wiper flats
Integrated wiper
Extra positive rake face geometry
12 indexes

DiPosPenta
1DP1C - Hi-Feed End Mill

Ø.750-1.500"
TopOn Connection
5 mm Insert with 10 indexes
.059" Depth of cut
Same insert fits Hi-Feed & 65° MIlls
Positive rake and reinforced edge offer low cutting forces and smooth machining in deep cavities
High ramping capability
Great price-per-edge economy!

DiPosPenta
1DP1C - Hi-Feed End Mill

Ø.750-1.500"
Cylindrical Shank
5 mm Insert with 10 indexes
.059" Depth of cut
Same insert fits Hi-Feed & 65° MIlls
Positive rake and reinforced edge offer low cutting forces and smooth machining in deep cavities
High ramping capability
Great price-per-edge economy!

DiPosPenta
1DP1P - Hi-Feed End Mill

Ø1.500"
Cylindrical Shank
10 mm Insert with 10 indexes
.11" Depth of cut
Same insert fits Hi-Feed & 65° MIlls
Positive rake and reinforced edge offer low cutting forces and smooth machining in deep cavities
High ramping capability
Great price-per-edge economy!

DiPosPenta
1DP1P - Hi-Feed End Mill

Ø1.500"
TopOn Connection
.11" Depth of cut
10 mm Insert with 10 indexes
Same insert fits Hi-Feed & 65° MIlls
Positive rake and reinforced edge offer low cutting forces and smooth machining in deep cavities
High ramping capability
Great price-per-edge economy!

DiPosPenta
DM6C - 65° Face Mill

Ø1.500-3.000"
5 mm Insert with 10 indexes
.13" Depth of cut
Same insert fits Hi-Feed & 65° Mills
Positive rake and reinforced edge offer low cutting forces and smooth machining
Great price-per-edge economy!

DiPosPenta
DM6P - 65° Face Mill

Ø2.00-4.00"
.25" Depth of cut
10mm Insert with 10 indexes
Same insert fits Hi-Feed & 65° MIlls
63-125 Ra surface finishes
Positive rake and reinforced edge offer low cutting forces and smooth machining
Great price-per-edge economy!

DiPosPenta
DP6C - Hi-Feed Face Mill

Ø1.500-2.500"
5 mm Insert with 10 indexes
.059" Depth of cut
Same insert fits Hi-Feed & 65° Mills
Positive rake and reinforced edge offer low cutting forces and smooth machining in deep cavities
High ramping capability
Great price-per-edge economy!

DiPosPenta
DP6P - Hi-Feed Face Mill

Ø2.000-3.000"
10 mm Insert with 10 indexes
.11" Depth of cut
Same insert fits Hi-Feed & 65° Mills
Positive rake and reinforced edge offer low cutting forces and smooth machining in deep cavities
High ramping capability
Great price-per-edge economy!

DiPosPenta
PNCU05_M - Multi-Purpose Insert

Reinforced Cutting Edge
Positive rake face for efficient chip evacuation and smooth cutting
10 indexes

DiPosPenta
PNCU05_ML - Insert for SS/Hi-Temp/Ti

Keen Edge for SS/Hi-Temp/Ti
Positive rake face for efficient chip evacuation and smooth cutting
10 indexes

DiPosPenta
PNCU10_M - Multi-Purpose Insert

Reinforced Cutting Edge
Positive rake face for efficient chip evacuation and smooth cutting
10 indexes

DiPosPenta
PNCU10_ML - Insert for SS/Hi-Temp/Ti

Keen Edge for SS/Hi-Temp/Ti
Positive rake face for efficient chip evacuation and smooth cutting
10 indexes

DiPosProB
12L8D 90° - Circle Segment End Mill

Ø12-32mm
TopOn Connection
6 mm Insert with 4 indexes
Insert Form Radii: 20mm

DiPosProB
12L8G 90° - Circle Segment End Mill

Ø20-32mm
TopOn Connection
12 mm Insert with 4 indexes
Insert Form Radii: 30mm

DiPosProB
12M8D 75° - Circle Segment End Mill

Ø16-25mm
TopOn Connection
6 mm Insert with 4 indexes
Insert Form Radii: 20mm

DiPosProB
12M8G 75° - Circle Segment End Mill

Ø20-32mm
TopOn Connection
12 mm Insert with 4 indexes
Insert Form Radii: 30mm

DiPosProB
12N8D 45° - Circle Segment End Mill

Ø16-20mm
TopOn Connection
6 mm Insert with 4 indexes
Insert Form Radii: 20mm

DiPosProB
12N8G 45° - Circle Segment End Mill

Ø32 mm
TopOn Connection
12 mm Insert with 4 indexes
Insert Form Radii: 30mm

DiPosProB
CNHJ 20mm Rad. DiPos ProB Inserts

Barrel Insert with 4 Indexes
Finishing Applications
20mm PRFRAD

DiPosProB
CNHJ 30mm Rad. DiPos ProB Inserts

Barrel Insert with 4 Indexes
Finishing Applications
30mm PRFRAD

DiPosQuad
1DJ1E - 90° End Mill

Ø16-40 mm
TopOn Connection
7 mm Insert with 8 indexes
5 mm Depth of cut
15-32 Ra surface finishes when engaging the wiper (WEP)
Great Price-per-Edge economy!
Insert corner: .031" R

DiPosQuad
1DJ1E - 90° Rough & Finish End Mill

Ø16-32 mm
Weldon Shank (Metric)
7 mm Insert with 8 indexes
5 mm Depth of cut
15-32 Ra surface finishes when engaging the wiper (WEP)
Great Price-per-Edge economy!
Insert corner: .031" R

DiPosQuad
1DJ1E - 90° Rough & Finish End Mill

Ø.625-1.500"
Weldon Shank
7 mm Insert with 8 indexes
Insert corner: .031" R
.19" Depth of cut
15-32 Ra surface finishes when engaging the wiper (WEP)
Great Price-per-Edge economy!

DiPosQuad
1DJ1R - 90° End Mill

Ø1.00-1.50"
TopOn Connection
10 mm Insert with 8 indexes
.27" Depth of cut
15-32 Ra surface finishes when engaging the wiper (WEP)
Great Price-per-Edge economy!
Insert corner: .031" R

DiPosQuad
1DJ1R - 90° End Mill

Ø25-40 mm
TopOn Connection
10 mm Insert with 8 indexes
7 mm Depth of cut
0.4-0.8 Ra surface finishes when engaging the wiper (WEP)
Great Price-per-Edge economy!
Insert corner: 0.8 mm R

DiPosQuad
1DJ1R - 90° Rough & Finish End Mill

Ø25-40 mm
Weldon Shank
10 mm Insert with 8 indexes
Insert corner: 0.8 mm R
7 mm Depth of cut
0.4-0.8 Ra surface finishes when engaging the wiper (WEP)
Great Price-per-Edge economy!

DiPosQuad
1DJ1R - 90° Rough & Finish End Mill

Ø1.000-1.500"
Cylindrical Shank
10 mm Insert with 8 indexes
Insert corner: .031" R
.27" Depth of cut
15-32 Ra surface finishes when engaging the wiper (WEP)
Great Price-per-Edge economy!

DiPosQuad
1DJ1R - 90° Rough & Finish End Mill

Ø1.000-1.500"
Weldon Shank
10 mm Insert with 8 indexes
Insert corner: .031" R
.27" Depth of cut
15-32 Ra surface finishes when engaging the wiper (WEP)
Great Price-per-Edge economy!

DiPosQuad
DJ5E - 90° Rough & Finish Face Mill

Ø32-50 mm
7 mm Insert with 8 indexes
5 mm Depth of Cut
15-32 Ra surface finishes when engaging the wiper (WEP)
Insert corners: .031" R

DiPosQuad
DJ5E, DJ6E - 90° Rough & Finish Face Mill

Ø1.500-3.000"
7 mm Insert with 8 indexes
.19" Depth of Cut
15-32 Ra surface finishes when engaging the wiper (WEP)
Insert corners: .031" R

DiPosQuad
DJ5G, DJ6G - 90° Face Mill

Ø2.000-6.000"
12 mm Insert with 8 indexes
.33" Depth of Cut
32-63 Ra surface finishes when engaging the wiper (WEP)
Insert corners: .031" R

DiPosQuad
DJ5R, DJ6R - 90° Rough & Finish Face Mill

Ø40-125 mm
10 mm Insert with 8 indexes
7 mm Depth of Cut
0.4-0.8 Ra surface finishes when engaging the wiper (WEP)
Insert corners: 0.8 R

DiPosQuad
DJ5R, DJ6R - 90° Rough & Finish Face Mill

Ø1.500-5.000"
10 mm Insert with 8 indexes
.27" Depth of Cut
15-32 Ra surface finishes when engaging the wiper (WEP)
Insert corners: .031" R

DiPosQuad
SQGU07_M - Multi-Purpose, Full Shoulder

Pressed rake face geometry promotes efficient chip formation
Integrated wiper flats
Insert Corner: .031" R
8 indexes

DiPosQuad
SQGU07_ML - High Positive, Full Shoulder

High Positive & Keen edge
Pressed rake face geometry promotes efficient chip formation
Integrated wiper flats
Insert Corner: .031" R
8 indexes

DiPosQuad
SQGU10_M - Multi-Purpose, Full Shoulder

Pressed rake face geometry promotes efficient chip formation
Integrated wiper flats
Insert Corner: .031" R
8 indexes

DiPosQuad
SQGU10_MMP - High Positive, Partial Shoulder

Pressed rake face geometry promotes efficient chip formation
Integrated wiper flats
Insert Corner: .031" R
8 indexes
90° Shoulder up to .27"
Keen edge and tight tolerance for light chiploads & finishing

DiPosQuad
SQGU10_MP - Positive, Partial Shoulder

Pressed rake face geometry promotes efficient chip formation
Integrated wiper flats
Insert Corner: .031" R
8 indexes
90° Shoulder up to .27"
Ideal for roughing

DiPosQuad
SQGU12_MM - High Positive, Partial Shoulder

Pressed rake face geometry promotes efficient chip formation
Integrated wiper flats
Insert Corner: .031" R
8 indexes
Ideal for finishing and lighter chiploads

DiPosQuad
SQXU12_M - Positive, Partial Shoulder

Pressed rake face geometry promotes efficient chip formation
Integrated wiper flats
Insert Corner: .031" R
Strengthened Edge for abusive conditions & aggressive chiploads
8 indexes
Ideal for Roughing

DiPosQuadF
DG6G - Hi-Feed Face Mill

Ø50-100 mm
11 mm Insert with 8 indexes
1.8 mm Axial depth of cut for X/Y axis milling
7.5 mm Radial width of cut for plunge milling
Ideal for steel and iron
Enjoys heavy chiploads!

DiPosQuadF
DG6G - Hi-Feed Face Mill

Ø2.000-4.000"
11 mm Insert with 8 indexes
.07" Axial depth of cut for X/Y axis milling
.30" Radial width of cut for plunge milling
Ideal for steel and iron
Enjoys heavy chiploads!

DiPosQuadF
DG6K - Hi-Feed Face Mill

Ø63-125 mm
14 mm Insert with 8 indexes
2.5 mm Axial depth of cut for X/Y axis milling
9.5 mm Radial width of cut for plunge milling
Ideal for steel and iron
Enjoys heavy chiploads!

DiPosQuadF
DG6K - Hi-Feed Face Mill

Ø2.500-6.000"
14 mm Insert with 8 indexes
.10" Axial depth of cut for X/Y axis milling
.37" Radial width of cut for plunge milling
Ideal for steel and iron
Enjoys heavy chiploads!

DiPosQuadF
DN5G DN6G - 45° Face Mill

Ø1.500-6.000"
11 mm Insert with 8 indexes
.165" Depth of cut
32-63 Ra surface finishes
Ideal for steel and iron
Enjoys heavy chiploads!

DiPosQuadF
DN5G DN6G - 45° Face Mill

Ø40-160 mm
11 mm Insert with 8 indexes
4.2 mm Depth of cut
0.8-1.6 Ra surface finishes
Ideal for steel and iron
Enjoys heavy chiploads!

DiPosQuadF
DN5K DN6K - 45° Face Mill

Ø50-200 mm
14 mm Insert with 8 indexes
6 mm Depth of cut
32-63 Ra surface finishes
Ideal for steel and iron
Enjoys heavy chiploads!

DiPosQuadF
DN5K DN6K - 45° Face Mill

Ø2.000-8.000"
14 mm Insert with 8 indexes
.235" Depth of cut
32-63 Ra surface finishes
Ideal for steel and iron
Enjoys heavy chiploads!

DiPosQuadF
SQGU11_M - Multi-Purpose Insert

Pressed rake face geometry promotes efficient chip formation
Integrated wiper flats
Integrated wiper orientation doubles as faceted corner
Designed for multiple materials and applications
8 indexes

DiPosQuadF
SQGU14_M - Multi-Purpose Insert

Pressed rake face geometry promotes efficient chip formation
Integrated wiper flats
Integrated wiper orientation doubles as faceted corner
Designed for multiple materials and applications
8 indexes

DiPosQuadF
SQGU14_ML - SS/Hi-Temp/Ti

Pressed rake face geometry promotes efficient chip formation
Integrated wiper flats
Keen edge for gummy materials
Integrated wiper orientation doubles as faceted corner
8 indexes

DiPos-Tetra
1TJ1C - 90° & Hi-Feed End Mill

Ø.500-1.000"
Cylindrical Shank
5 mm Insert with 2 indexes
90°: .18" DOC, Hi-Feed: .02" DOC
Insert corners: .008" .015" .031" R & Hi-Feed
32-63 Ra surface finishes when engaging the wiper (WEP)
Double dovetail pocket fosters easy insert indexing & eliminates insert screw stress

DiPos-Tetra
1TJ1C - 90° & Hi-Feed End Mill

Ø.625-1.000"
Weldon Shank
5 mm Insert with 2 indexes
90°: .18" DOC, Hi-Feed: .02" DOC
Insert corners: .008" .015" .031" R & Hi-Feed
32-63 Ra surface finishes when engaging the wiper (WEP)
Double-Dovetail-Pocket fosters easy insert indexing & eliminates insert screw stress

DiPos-Tetra
1TJ1C - 90° & Hi-Feed End Mill

Ø.500-1.000"
Chip Surfer Connection
5 mm Insert with 2 indexes
90°: .18" DOC, Hi-Feed: .02" DOC
Insert corners: .008" .015" .031" R & Hi-Feed
32-63 Ra surface finishes when engaging the wiper (WEP)
Double-Dovetail-Pocket fosters easy insert indexing & eliminates insert screw stress

DiPos-Tetra
1TJ1C - 90° & Hi-Feed End Mill

Ø.625-1.000"
TopOn Connection
5 mm Insert with 2 indexes
90°: .18" DOC, Hi-Feed: .02" DOC
Insert corners: .008" .015" .031" R & Hi-Feed
32-63 Ra surface finishes when engaging the wiper (WEP)
Double dovetail pocket fosters easy insert indexing & eliminates insert screw stress

DiPos-Tetra
1TJ1C - 90° & Hi-Feed End Mill (Metric)

Ø12.00 - 16.00 mm
Cylindrical Shank
5 mm Insert with 2 indexes
90°: 4.70 mm DOC, Hi-Feed: 0.50 mm DOC
Insert corners: .008" .015" .031" R & Hi-Feed
32-63 Ra surface finishes when engaging the wiper (WEP)
Double dovetail pocket fosters easy insert indexing & eliminates insert screw stress

DiPos-Tetra
1TJ1C - 90° & Hi-Feed End Mill (Metric)

Ø12.00 - 25.00 mm
TopOn Connection
5 mm Insert with 2 indexes
90°: 4.70 mm DOC, Hi-Feed: 0.50 mm DOC
Insert corners: .008" .015" .031" R & Hi-Feed
32-63 Ra surface finishes when engaging the wiper (WEP)
Double dovetail pocket fosters easy insert indexing & eliminates insert screw stress

DiPos-Tetra
1TJ1C - 90° & Hi-Feed End Mill (Metric)

Ø16.00 - 32.00 mm
Weldon Shank
5 mm Insert with 2 indexes
90°: 4.70 mm DOC, Hi-Feed: 0.50 mm DOC
Insert corners: .008" .015" .031" R & Hi-Feed
32-63 Ra surface finishes when engaging the wiper (WEP)
Double-Dovetail-Pocket fosters easy insert indexing & eliminates insert screw stress

DiPos-Tetra
1TJ1C - 90° End Mill for Live Tools & Swiss

Ø.750-1.000"
Chip Surfer Connection
5 mm Insert with 2 indexes
90°: .18" DOC, Hi-Feed: .02" DOC
Insert corners: .008" .015" .031" R & Hi-Feed
32-63 Ra surface finishes when engaging the integrated wiper (WEP)
Double-Dovetail-Pocket fosters easy insert indexing & eliminates insert screw stress
Large diameter heads fit small ER Shanks
Ideal for milling flats and hex on round stock

DiPos-Tetra
1TJ1C - 90° End Mill for Swiss & Live Tooling

Ø.750-2.000"
Cylindrical Shank
.18" Depth of cut
5 mm Insert with 2 indexes
Insert corners: .008" .015" & .031" R
Shank ideal for ER Spring collets
32-63 Ra surface finishes when engaging the wiper (WEP)
Double-Dovetail-Pocket fosters easy insert indexing & eliminates insert screw stress

DiPos-Tetra
1TJ1N - 90° End Mill

Ø1.250-1.500"
TopOn Connection
16 mm Insert with 4 indexes
.59" Depth of cut
32-63 Ra surface finishes when engaging the wiper (WEP)
Insert corners: .015", .031", .062" R

DiPos-Tetra
1TJ1N - 90° End Mill

Ø1.250-2.000"
Weldon Shank
16 mm Insert with 4 indexes
.59" Depth of cut
32-63 Ra surface finishes when engaging the wiper (WEP)
Insert corners: .015", .031", .062"R

DiPos-Tetra
1TJ1Q - 90° End Mill

Ø1.000-1.500"
Weldon Shank
12 mm Insert with 4 indexes
.43" Depth of cut
32-63 Ra surface finishes when engaging the wiper (WEP)
Insert corners: .015", .031", .062" R

DiPos-Tetra
1TJ1Q - 90° End Mill

Ø1.000-1.500"
TopOn Connection
12 mm Insert with 4 indexes
.43" Depth of cut
32-63 Ra surface finishes when engaging the wiper (WEP)
Insert corners: .015", .031", .062" R

DiPos-Tetra
1TJ1Q - 90° End Mill (Metric)

Ø25.00 - 40.00 mm
TopOn Connection
12 mm Insert with 4 indexes
11.10 mm Depth of cut
32-63 Ra surface finishes when engaging the wiper (WEP)
Insert corners: .015", .031", .062" R

DiPos-Tetra
1TJ1Q - 90° End Mill (Metric)

Ø25.00 - 40.00 mm
Weldon Shank
12 mm Insert with 4 indexes
11.10 Depth of cut
32-63 Ra surface finishes when engaging the wiper (WEP)
Insert corners: .015", .031", .062" R

DiPos-Tetra
ANHU12 - Multi-Purpose Insert

Pressed rake face geometry promotes efficient chip formation
Integrated wiper flat on face for producing surface finishes as good as 32 Ra
Designed for multiple materials and applications
4 Indexes

DiPos-Tetra
ANHU12_FR - Insert for SS/Hi-Temps

Keen edge for SS/Hi-Temp Alloys
Integrated wiper flat on face for producing surface finishes as good as 32 Ra
Pressed rake face geometry promotes efficient chip formation
4 Indexes

DiPos-Tetra
ANHU12_P - Insert for Non-Ferrous

Sharp edge & polished rake face for non-ferrous materials
Integrated wiper flat on face for producing surface finishes as good as 32 Ra
4 Indexes

DiPos-Tetra
ANHU16 - Multi-Purpose Insert

Pressed rake face geometry promotes efficient chip formation
Integrated wiper flat on face for producing surface finishes as good as 40 Ra
Designed for multiple materials and applications
4 Indexes

DiPos-Tetra
ANHU16_ANR - Multi-Purpose Insert

Pressed rake face geometry promotes efficient chip formation
Integrated wiper for producing surface finishes as good as 32 Ra
Designed for multiple materials and applications
For use on 45° cutter
4 Indexes

DiPos-Tetra
ANHU16_FR - Insert for SS/Hi-Temps

Keen edge for SS/Hi-Temp Alloys
Integrated wiper flat on face for producing surface finishes as good as 40 Ra
Pressed rake face geometry promotes efficient chip formation
4 Indexes

DiPos-Tetra
ANHU16_P - Insert for Non-Ferrous

Sharp edge & polished rake face for non-ferrous materials
Integrated wiper flat on face for producing surface finishes as good as 40 Ra
4 Indexes

DiPos-Tetra
ANXU12 - Heavy Duty Insert

Pressed rake face geometry promotes efficient chip formation
Integrated wiper flat on face for producing surface finishes as good as 32 Ra
Designed for multiple materials and applications
4 Indexes

DiPos-Tetra
ENHU05 - Multi-Purpose Insert

Pressed rake face geometry promotes efficient chip formation
Integrated wiper flats
Designed for multiple materials and applications
2 Indexes

DiPos-Tetra
ENHU05-PH - Insert for SS/HiTemp/Ti

Keen edge for SS/Hi-Temp/Ti
Pressed rake face geometry promotes efficient chip formation
Integrated wiper flats
2 Indexes

DiPos-Tetra
TJ1C - 90° & Hi-Feed Face Mill

Ø1.500-2.000"
5 mm Insert with 2 indexes
.18" 90° Depth of Cut
.02" Hi-Feed Depth of Cut
Insert corners: .008" .015" .031" R & Hi-Feed
32-63 Ra surface finishes when engaging the wiper (WEP)
Double dovetail pocket fosters easy insert indexing & eliminates insert screw stress

DiPos-Tetra
TJ1C - 90° & Hi-Feed Face Mill (Metric)

Ø32.00 - 40.00 mm
5 mm Insert with 2 indexes
4.70 mm 90° Depth of Cut
0.50 mm Hi-Feed Depth of Cut
Insert corners: .008" .015" .031" R & Hi-Feed
32-63 Ra surface finishes when engaging the wiper (WEP)
Double dovetail pocket fosters easy insert indexing & eliminates insert screw stress

DiPos-Tetra
TJ5N, TJ6N - 90° Face Mill

Ø2.000-8.000"
16 mm Insert with 4 Indexes
.59" Depth of cut
32-63 Ra surface finishes when engaging the wiper (WEP)
Insert corners: .015", .031", .062", .094" R

DiPos-Tetra
TJ5N, TJ6N - 90° Face Mill (Metric)

Ø50.00 - 125.00 mm
16 mm Insert with 4 Indexes
15.00 mm Depth of cut
32-63 Ra surface finishes when engaging the wiper (WEP)
Insert corners: .015", .031", .062", .094" R

DiPos-Tetra
TJ5Q / TJ6Q - 90° Face Mill (Metric)

Ø40.00 - 125.00 mm
12 mm Insert with 4 indexes
11.10 mm Depth of cut
32-63 Ra surface finishes when engaging the wiper (WEP)
Insert corners: .015", .031", .062" R

DiPos-Tetra
TJ5Q, TJ6Q - 90° Face Mill

Ø2.000-4.000"
12 mm Insert with 4 indexes
.43" Depth of cut
32-63 Ra surface finishes when engaging the wiper (WEP)
Insert corners: .015", .031", .062" R

DiPos-Tetra
TN1N - 45° Face Mill

Ø2.00-6.00"
.332" Depth of cut
16 mm Insert with 4 indexes
32-63 Ra surface finishes when engaging the wiper (WEP)

DiPos-Tetra
UNHU05 - Hi-Feed Insert

Axial & Radial Dovetail seat design accomodates easy indexing & minimizes stress on the screw
Insert fits same ENHU05 pocket for Hi-Feed milling applications
Pressed rake face geometry promotes efficient chip formation
Designed for multiple materials and applications
2 Indexes

DiPos-Tetra
ZNHU16 - Insert with chip splitters

Chip Splitters minimize radial forces and break up harmonics for chatter control
Pressed rake face geometry promotes efficient chip formation
Integrated wiper flat on face for producing surface finishes as good as 40 Ra
Designed for roughing multiple materials and applications
4 Indexes

DiPos-Trio
1DJ1F - 90° Rough & Finish End Mill

Ø1.000-1.500"
Weldon Shank
9 mm Insert with 6 indexes
.24" Depth of cut
25-40 Ra surface finishes when engaging the wiper (WEP)
Great Price-per-Edge economy!
Insert corners: .015", .020", .031", .039", .062" R

DiPos-Trio
1DJ1F - 90° Rough & Finish End Mill

Ø1.000 - 1.500"
TopOn Connection
9 mm Insert with 6 indexes
.24" Depth of cut
25-40 Ra surface finishes when engaging the wiper (WEP)
Great price-per-edge economy!
Insert corners: .015", .020", .031", .039", .062" R

DiPos-Trio
1DJ1P_X - 90° Rough & Finish End Mill

Ø1.250-1.500" (M-Adaption)
.36" Depth of cut
13 mm Insert with 6 indexes
25-40 Ra surface finishes when engaging the wiper (WEP)
Great price-per-edge economy!
Insert corners: .015", .031", .062" R

DiPos-Trio
1WJ1D_T - 90° Rough & Ramp End Mill (Metric)

Ø16 - 20mm
Chip Surfer Tip Adaption
4 mm Insert with 6 indexes
3.8mm Depth of Cut
Finishes 63 - 125 Ra
Insert corners: .008", .015", .031" R

DiPos-Trio
1WJ1D_W - 90° Rough & Ramp End Mill (Metric)

Ø16 - 32mm
Weldon Shank
4 mm Insert with 6 indexes
3.8mm Depth of Cut
Finishes 63 - 125 Ra
Insert corners: .008", .015", .031" R

DiPos-Trio
1WJ1D_X - 90° Rough & Ramp End Mill (Metric)

Ø16 - 40mm
TopOn Adaption
4 mm Insert with 6 indexes
3.8mm Depth of Cut
Finishes 63 - 125 Ra
Insert corners: .008", .015", .031" R

DiPos-Trio
1WJ1F_W - 90° Rough & Ramp End Mill

Ø1.000-1.500"
Weldon Shank
6 mm Insert with 6 indexes
.23" Depth of cut
Finishes as good as 80 Ra
Insert corners: .015", .031", .062" R

DiPos-Trio
1WJ1F_W - 90° Rough & Ramp End Mill (Metric)

Ø25-40mm
Weldon Shank
6 mm Insert with 6 indexes
5.8mm Depth of Cut
Finishes 63 - 125 Ra
Insert corners: .015", .031", .062" R

DiPos-Trio
1WJ1F_X -90° Rough & Ramp End Mill (Metric)

Ø25 - 40mm
TopOn Adaption
6 mm Insert with 6 indexes
5.8mm Depth of Cut
Finishes 63 - 125 Ra
Insert corners: .015", .031", .062" R

DiPos-Trio
DJ5F - 90° Rough & Finish Face Mill (Metric)

Ø40 - 100mm
9 mm Insert with 6 indexes
6.1mm Depth of cut
Finishes 20 - 32 Ra
Insert corners: .015", .020", .031", .039", .062" R

DiPos-Trio
DJ5F, DJ6F - 90° Rough & Finish Face Mill

Ø2.000-4.000"
9 mm Insert with 6 indexes
.24" Depth of Cut
20-32 Ra surface finishes when engaging the wiper (WEP)
Insert corners: .015", .020", .031", .039", .062" R

DiPos-Trio
DJ5P, DJ6P - 90° Rough & Finish Face Mill

Ø2.000-6.000"
13 mm Insert with 6 indexes
.36" Depth of Cut
20-32 Ra surface finishes when engaging the wiper (WEP)
Insert corners: .015", .031", .062" R

DiPos-Trio
DJ5P/DJ6P - 90° Rough & Finish Face Mill (Metric)

Ø50 - 160mm
13 mm Insert with 6 indexes
9.1mm Depth of cut
Finishes 20 - 32 Ra
Insert radii: .015", .031", .062" R

DiPos-Trio
FHU - Flat Bottom Plunge Rough End Mill

Ø20.00 - 42.00mm
TopOn Connection
4 mm Insert with 6 indexes
3.8mm Depth of cut
Great price-per-edge economy!
Insert corner: .008", .015", .031" R

DiPos-Trio
FHU - Flat Bottom Plunge Rough End Mill

Ø.750-1.000"
TopOn Connection
4 mm Insert with 6 indexes
.15" Depth of cut
Great price-per-edge economy!
Insert corner: .008", .015", .031" R

DiPos-Trio
FHU - Flat Bottom Plunge Rough End Mill

Ø1.250-1.500"
TopOn Connection
6 mm Insert with 6 indexes
.23" Depth of cut
Great price-per-edge economy!
Insert corners: .015", .031", .062" R

DiPos-Trio
FHU - Flat Bottom Plunge Rough Mill

Ø.750-1.000"
Cylindrical Shank
4 mm Insert with 6 indexes
Great price-per-edge economy!
Insert corner: .008", .015", .031" R
.15" Depth of Cut

DiPos-Trio
FHU - Flat Bottom Plunge Rough Mill

Ø1.250-1.500"
Cylindrical Shank
6 mm Insert with 6 indexes
Great price-per-edge economy!
Insert corners: .015", .031", .062" R
.23" Depth of cut

DiPos-Trio
TNGU22 - Multi-Purpose Insert

Pressed rake face geometry promotes efficient chip formation
Designed for multiple materials and applications
6 Indexes

DiPos-Trio
WJ5D / WJ6D - 90° Rough & Ramp Face Mill (Metric)

Ø32 - 63mm
4 mm Insert with 6 indexes
3.8mm Depth of cut
Finishes 63 - 125 Ra
Insert radii: .008", .015", .031" R

DiPos-Trio
WJ5F - 90° Rough & Ramp Face Mill

Ø2.000-4.000"
6 mm Insert with 6 indexes
.23" Depth of cut
Finishes as good as 80 Ra
Insert radii: .015", .031"

DiPos-Trio
WJ5F / WJ6F - 90° Rough & Ramp Face Mill (Metric)

Ø40 - 125mm
6 mm Insert with 6 indexes
5.8mm Depth of cut
Finishes 63 - 125 Ra
Insert radii: .015", .031", .062" R

DiPos-Trio
WNCU04_P - Insert for Non-Ferrous

Pressed rake face geometry promotes efficient chip formation
Sharp edge & polished rake face for non-ferrous materials
6 Indexes

DiPos-Trio
WNCU06_P - Insert for Non-Ferrous

Pressed rake face geometry promotes efficient chip formation
Sharp edge & polished rake face for non-ferrous materials
6 Indexes

DiPos-Trio
WNGU09 - Multi-Purpose Insert

Pressed rake face geometry promotes efficient chip formation
Integrated wiper on face for producing surface finishes as good as 20 Ra
Designed for multiple materials and applications
6 Indexes

DiPos-Trio
WNGU09_P - Insert for Non-Ferrous

Sharp edge & polished rake face for non-ferrous materials
Integrated wiper on face for producing surface finishes as good as 20 Ra
Pressed rake face geometry promotes efficient chip formation
6 Indexes

DiPos-Trio
WNGU09-ML - Keen Edge Insert

Pressed rake face geometry promotes efficient chip formation
Integrated wiper on face for producing surface finishes as good as 20 Ra
Designed with keen edge for gummier materials and finishing applications
6 Indexes

DiPos-Trio
WNGU13 - Multi-Purpose Insert

Pressed rake face geometry promotes efficient chip formation
Integrated wiper on face for producing surface finishes as good as 20 Ra
Designed for multiple materials and applications
6 Indexes

DiPos-Trio
WNGU13_P - Insert for Non-Ferrous

Sharp edge & polished rake face for non-ferrous materials
Integrated wiper on face for producing surface finishes as good as 20 Ra
Pressed rake face geometry promotes efficient chip formation
6 Indexes

DiPos-Trio
WNGU13-ML - Keen Edge Insert

Pressed rake face geometry promotes efficient chip formation
Integrated wiper on face for producing surface finishes as good as 20 Ra
Designed with keen edge for gummier materials and finishing applications
6 Indexes

DiPos-Trio
WNMU04 - Multi-Purpose Insert

Pressed rake face geometry promotes efficient chip formation
Designed for multiple materials and applications
6 Indexes

DiPos-Trio
WNMU06 - Multi-Purpose Insert

Pressed rake face geometry promotes efficient chip formation
Designed for multiple materials and applications
6 Indexes

Fast-Break
15R1V - Corner Round End Mill

Ø.750-1.000"
Weldon Shank
12 mm Insert with 2 indexes
Inch corners: .031, .062, .094, .125 R
Metric corners: 1.0, 2.0, 3.0 mm R

Fast-Break
15R1V - Corner Round End Mill

Ø1.000"
TopOn Connection
12 mm Insert with 2 indexes
Inch corners: .031, .062, .094, .125 R
Metric corners: 1.0, 2.0, 3.0 mm R

Fast-Break
15R1V - Corner Round End Mill (Metric)

Ø25.00 mm
Weldon Shank
12 mm Insert with 2 indexes
Inch corners: .031", .062", .125" R
Metric corners: 1.0, 2.0, 2.5, 3.0, 4.0 mm R

Fast-Break
15R4H - Corner Round End Mill

Ø.750-1.000"
Weldon Shank
25 mm Insert with 2 indexes
Inch corners: .187, .250 R
Metric corners: 4.0, 5.0, 6.0 mm R

Fast-Break
15R4H - Corner Round End Mill (Metric)

Ø25.00 mm
Weldon Shank
25 mm Insert with 2 indexes
Inch corners: .187", .250" R
Metric corners: 4.0, 5.0, 6.0 mm R

Fast-Break
15R4H - Corner Round End Mill (Metric)

Ø25.00 mm
TopOn Adaption
25 mm Insert with 2 indexes
Inch corners: .187", .250" R
Metric corners: 4.0, 5.0, 6.0 mm R

Fast-Break
BEEW - Corner Round

Concave corner round inserts
Inch radii: .031, .062, .098, .125
Metric radii: 1.0, 2.0, 2.5, 3.0
More appealing corner break than a chamfer or a file
Elliptical corner blends to avoid gouging
2 Indexes

Fast-Break
FEEW - Corner Round

Concave Corner Round Inserts
Inch radii: .156, .187, .250
Metric radii: 4.0, 5.0, 6.0
More appealing corner break than a chamfer or a file
Elliptical corner blends to avoid gouging
2 Indexes

Feed-Rounds
45ARA - Hi-Feed End Mill

Ø6-12 mm
Cylindrical Shank (Metric)
4 Flute, 0° Helix

Feed-Rounds
45DRA - Hi-Feed End Mill

Ø6-12 mm
Cylindrical Shank (Metric)
2 or 4 Flute, 0° Helix
Excellent for high productivity
For cast iron, alloy and hardened steel up to 65HRc, stainless steel, titanium and nickel based alloys

Feed-Rounds
47A_RA - Hi-Feed End Mill

Ø.250-.750"
Cylindrical Shank
4 Flute, 0° Helix

Feed-Rounds
47ARA - Hi-Feed End Mill

Ø1-20 mm
Cylindrical Shank (Metric)
2 or 4 Flute, 0° Helix

FineMold+
NQHB - Metric Barrel (Taper Form) Insert

Milling insert
Ø8mm-30mm

FineMold+
NQHL - Metric Barrel Lens Insert

Milling insert
Ø12mm-30mm

Finish-Ball Plus
12A5 - Ball Nose & Backdraft End Mill

Ø.375-.750"
Cylindrical Shank
Straight carbide body
Ball nose & backdraft insert options
High-precision insert with 1 index

Finish-Ball Plus
12A8 - Ball Nose & Backdraft End Mill

Ø.375-.750"
Cylindrical Shank
Tapered steel body
Ball nose & backdraft insert options
Coolant directed to cutting edge via coolant channels on insert
High-precision insert with 1 index

Finish-Ball Plus
12A9 - Ball Nose & Backdraft End Mill

Ø.375-1.250"
TopOn Connection
Ball nose & backdraft insert options
Coolant directed to cutting edge via coolant channels on insert
High-precision insert with 1 index

Finish-Ball Plus
12A9 - Ball Nose & Backdraft End Mill

Ø.375-1.250"
Cylindrical Shank (Steel)
Ball nose & backdraft insert options
Coolant directed to cutting edge via coolant channels on insert
High-precision insert with 1 index

Finish-Ball Plus
GQHG - Backdraft Insert

Milling insert
Ø.375"-1.000"
Corner radii: .031", .062", .125"

Finish-Ball Plus
NQHG_FM - Ball Nose Insert (Straight)

Milling Insert
Ø.375"-1.250"

Finish-Ball Plus
NQHG_SM - Ball Nose Insert (Helical)

Milling Insert
Ø.375"-1.250"

Form-Master
5W6S - Button Face Mill

Ø4.000–6.000”
1.000” IC Insert with 5-10 indexes
.500” Max. depth of cut
Variable land & flat rake face inserts for application flexibility
Heavy duty roughing!
Excellent performance & economy!

Form-Master
RPLB25_FN, 1.00" IC Round Button

Standard- .500" R
Heavy duty round button inserts
Positive, flat rake face geometry
5 indexes
Insert anti-rotation
Large 1/4-28 Insert screw
Super strong milling performance!

Form-Master
RPLB25_VL, 1.00" IC Round

Standard- .500" R
Heavy duty round button inserts
Positive, variable rake face geometry
5 indexes
Insert anti-rotation
Large 1/4-28 Insert screw
Super strong milling performance!

Form-Master Cera
RNGX, .500" IC Round

Dimpled button milling insert
RNGX double sided dimple

Form-Master Cera Plus
1DB1H - Ceramic Button End Mill

Ø1.250”
Weldon Shank
.500" IC insert, single sided
.250” Max. depth of cut
Secure Clamping, flat & dimple style inserts
Reliable performance, strength & economy!

Form-Master Cera Plus
DW1H*R02, DW2H*R02 - Ceramic Button Face Mill

Ø2.000-3.000”
.500" IC insert, double sided
.250” Max. depth of cut
Secure Clamping, flat & dimple style inserts
Reliable performance, strength & economy!

Form-Master Cera Plus
RNGN_T6, .500" IC Round

Ceramic button milling insert, face mill
RNGN double sided flat

Form-Master Cera Plus
RNGX_T6, .500" IC Round

Ceramic button milling insert, face mill
RNGX double sided dimple

Form-Master Cera Plus
RPGN_E04, .500" IC Round

Ceramic button milling insert, face mill
RPGN single-sided flat

Form-Master Cera Plus
RPGN_T6, .500" IC Round

Ceramic button milling insert, end mill
RPGN single-sided flat

Form-Master Plus
15B1 - Button End Mill

Inch & metric diameters
TopOn Connection
Button I.C.: 6, 8, 10, 12, & 16 mm

Form-Master Pro
15E1H - Button & Serrated End Mill

Ø1.000-1.500”
TopOn Connection
12 mm IC Insert with anti-rotation
6 mm (.236”) Max. depth of cut
Round & serrated button inserts
Reliable performance, strength & economy!

Form-Master Pro
15E1H - Button & Serrated End Mill (Weldon)

Ø1.000-1.500"
Weldon Shank
12 mm IC Insert with anti-rotation
6 mm (.236”) Max. depth of cut
Round & serrated button inserts
Reliable performance, strength & economy!

Form-Master Pro
15E1H - Button End Mill (Cylindrical)

Ø1.000 - 1.500 (Cylindrical)
6 mm (.236”) Max. depth of cut
12 mm IC Insert with anti-rotation
Round & serrated button inserts
Reliable performance, strength & economy!

Form-Master Pro
15E1K - Button End Mill

Ø1.250-1.500”
TopOn Connection
16 mm IC Insert with anti-rotation
8 mm (.315") Max. depth of cut
Round & serrated button inserts
Reliable performance, strength & economy!

Form-Master Pro
5E6H - Button Face Mill

Ø50-80 mm
12 mm Insert IC
Serrated insert offers 4 indexes
Round insert offers 8 indexes
Anti-rotation insert mounting
Strong inserts clamping screw for demanding applications
Reliable performance, strength & economy!

Form-Master Pro
5E6H - Button Face Mill

Ø2.000"
12 mm IC Insert
Serrated insert offers 4 indexes
Round insert offers 8 indexes
Anti-rotation insert mounting
Strong inserts clamping screw for demanding applications
Reliable performance, strength & economy!

Form-Master Pro
5E6K - Button Face Mill

Ø2.000-5.000"
16 mm IC Insert
Serrated insert offers 4 indexes
Round insert 8 offers 8 Indexes
Anti-rotation insert mounting
Strong inserts clamping screw for demanding applications
Reliable performance, strength & economy!

Form-Master Pro
5E6K - Button Face Mill

Ø100-160 mm
16 mm Insert IC
Serrated insert offers 4 indexes
Round insert 8 offers 8 Indexes
Anti-rotation insert mounting
Strong inserts clamping screw for demanding applications
Reliable performance, strength & economy!

Form-Master Pro
RCLT1204M0N-CC1, 12 mm IC Round

Standard, Neutral - 6 mm R
Ideal for ferrous materials
4 Indexes

Form-Master Pro
RCLT1204M0N-CC2, 12 mm IC Round

Heavy-Duty, Neutral - 6 mm R
Ideal for ferrous materials
4 Indexes

Form-Master Pro
RCLT1204M0TN-PH2, 12 mm IC Round

Heavy-Duty, Neutral - 6 mm R
Ideal for ferrous materials
4 Indexes

Form-Master Pro
RCLT1606M0N-CC, 16 mm IC Round

Standard, Neutral - 8 mm R
Ideal for ferrous materials
4 Indexes

Form-Master Pro
RCLT1606M0N-CC1, 16 mm IC Round

Standard, Neutral - 8 mm R
Ideal for ferrous materials
4 Indexes

Form-Master Pro
RCLT1606M0N-CC2, 16 mm IC Round

Heavy-Duty, Neutral - 8 mm R
Ideal for ferrous materials
4 Indexes

Form-Master Pro
RCLT1606M0N-CP, 16 mm IC Round

Grd/Pol for Al - 8 mm R
Ideal for non-ferrous materials
4 Indexes

Form-Master Pro
RCLT1606M0TN-PH, 16 mm IC Round

Standard, Neutral - 8 mm R
Ideal for ferrous materials
4 Indexes

Form-Master Pro
RCLT1606M0TN-PH2, 16 mm IC Round

Heavy-Duty, Neutral - 8 mm R
Ideal for ferrous materials
4 Indexes

Form-Master R
1DE1H - Button & Serrated End Mill

Ø1.250” & 1.500”
TopOn Connection
12 mm IC Inser with 8-16 indexes
.236" (6 mm) Max. depth of cut
Round & serrated inserts for application flexibility
Serrated insert for long reach application & chip management
Excellent performance & economy!

Form-Master R
1DE1H - Button End Mill

Ø1.250 - 1.500"
Cylindrical Shank
12 mm IC Insert with 8-16 indexes
.236" (6 mm) Max. depth of cut
Round & serrated inserts for application flexibility
Serrated insert for long reach application & chip management
Excellent performance & economy!

Form-Master R
1DE1H - Button End Mill

Ø1.250-1.500"
Weldon Shank
Button End Mill

Form-Master R
1DE6G - Button & Serrated End Mill

Ø25-40 mm
TopOn Connection
10 mm IC Insert with 8-16 indexes
.197" (5 mm) Max. depth of cut
Round & serrated inserts for application flexibility
Serrated insert for long reach application & chip management
Excellent performance & economy!

Form-Master R
1DE6H - Button & Serrated End Mill

Ø32-40 mm
TopOn Connection
12 mm IC Insert with 8-16 indexes
.236" (6 mm) Max. depth of cut
Round & serrated inserts for application flexibility
Serrated insert for long reach application & chip management
Excellent performance & economy!

Form-Master R
DE6G - Button Face Mill

Ø50-52 mm
10 mm IC insert with 4 indexes
.197" (5 mm) Max. depth of cut
Round & serrated inserts for application flexibility
Serrated insert for long reach application & chip management
Excellent performance & economy!

Form-Master R
DE6H - Button Face Mill

Ø50-80 mm
12 mm IC Insert with 8-16 indexes
.236" (6 mm) Max. depth of cut
Round & serrated inserts for application flexibility
Serrated insert for long reach application & chip management
Excellent performance & economy!

Form-Master R
DE6H - Button Face Mill

Ø2.000–3.000”
12 mm IC insert with 8-16 indexes
.236" (6 mm) Max. depth of cut
Round & serrated inserts for application flexibility
Serrated insert for long reach application & chip management
Excellent performance & economy!

Form-Master R
DE6K - Button Face Mill

Ø50-160 mm
16 mm IC insert with 4-8 indexes
.315" (8 mm) Max. depth of cut
Round & serrated inserts for application flexibility
Serrated insert for long reach application & chip management
Excellent performance & economy!

Form-Master R
RNLU1004MON-M, 10 mm IC Round

Standard - 5 mm R
Ideal for non-ferrous materials
Double sided insert
8 Indexes

Form-Master R
RNLU1004MON-S, 10 mm IC Round

Standard - 5 mm R
Ideal for non-ferrous materials
Double sided insert
8 Indexes

Form-Master R
RNLU1205MON-M, 12 mm IC Round

Standard - 6 mm R
Ideal for non-ferrous materials
Double sided insert
16 Indexes

Form-Master R
RNLU1205MON-S, 12 mm IC Round

Serrated - 6 mm R
Ideal for non-ferrous materials
Double sided insert
8 Indexes

Form-Master R
RNLU1606MON-M, 16 mm IC Round

Standard - 8 mm R
Ideal for non-ferrous materials
Double sided insert
16 Indexes

Form-Master R
RNLU1606MON-S, 16 mm IC Round

Standard - 8 mm R
Ideal for non-ferrous materials
Double sided insert
8 Indexes

Form-Master Shear
15B1A - Button End Mill

Ø20-25 mm
TopOn Connection
10 mm IC Insert
Max. depth of cut: 5 mm
Insert anti-rotation
Reliable performance, strength & economy!

Form-Master Shear
15B1A - Button End Mill

Ø1.000-1.250”
TopOn Connection
10 mm IC Insert
Max. depth of cut: 5 mm
Insert anti-rotation
Reliable performance, strength & economy!

Form-Master Shear
15B1B - Button End Mill

Ø1.000-1.500”
Cylindrical Shank
12 mm IC Insert with anti-rotation
6 mm (.236”) Max. depth of cut
Reliable performance, strength & economy!

Form-Master Shear
15B1B - Button End Mill

Ø1.000-1.500”
Weldon Shank
12 mm IC Insert with anti-rotation
6 mm (.236”) Max. depth of cut
Reliable performance, strength & economy!

Form-Master Shear
15B1B - Button End Mill

Ø1.000-1.500”
TopOn Connection
12 mm IC Insert with anti-rotation
Max. depth of cut: 5 mm
Reliable performance, strength & economy!

Form-Master Shear
15B1B - Button End Mill

Ø24-42 mm
TopOn Connection
12 mm IC Insert with anti-rotation
Max. depth of cut: 5 mm
Reliable performance, strength & economy!

Form-Master Shear
15B1B - Button End Mill

Ø24 mm
Weldon Shank
12 mm IC Insert with anti-rotation
6 mm (.236”) Max. depth of cut
Reliable performance, strength & economy!

Form-Master Shear
15B4H - Button End Mill

Ø1.000-1.500”
Cylindrical Shank
.500" IC Insert with anti-rotation
.250" Max. depth of cut
Reliable performance, strength & economy!

Form-Master Shear
15B4H - Button End Mill

Ø1.000-1.500”
Weldon Shank
.500" IC Insert with anti-rotation
.250" Max. depth of cut
Reliable performance, strength & economy!

Form-Master Shear
15B4H - Button End Mill

Ø1.000-1.250”
TopOn Connection
.500" IC Insert with anti-rotation
Max. depth of cut: .250"
Reliable performance, strength & economy!

Form-Master Shear
15B8E - Button End Mill

Ø.625-1.500”
TopOn Connection
4 mm Max. depth of cut
Reliable performance, strength & economy!

Form-Master Shear
15B8E - Button End Mill

Ø.625-1.000”
Cylindrical Shank
8 mm IC Insert
4 mm (.157”) Max. depth of cut
Reliable performance, strength & economy!

Form-Master Shear
15T1G - T-Slotter

Ø2.500-3.000"
TopOn Connection
10 mm IC button insert with 8 indexes
10 mm (.394") Cutting width
Insert anti-rotation
Reliable performance, strength & economy!

Form-Master Shear
15T8E - T-Slotter

Ø2.500-3.000"
TopOn Connection
8 mm IC button insert
8 mm (.315") Cutting width
Reliable performance, strength & economy!

Form-Master Shear
1A7E - Button Face Mill

Ø2.000”
4 mm Max. depth of cut
8 mm IC insert
Reliable performance, strength & economy

Form-Master Shear
1A7G - Button Face Mill

Ø2.000”
10 mm IC Insert with 8 indexes
5 mm Max. depth of cut
Insert anti-rotation
Reliable performance, strength & economy

Form-Master Shear
1A7G - Button Face Mill

Ø40 mm
10 mm Insert IC with 8 indexes
5 mm Max. depth of cut
Insert anti-rotation
Reliable performance, strength & economy

Form-Master Shear
1A7H - Button Face Mill

Ø2.000-6.000”
12 mm IC Insert with 8 indexes
6 mm (.236”) Max. depth of cut
Insert anti-rotation
Reliable performance, strength & economy!

Form-Master Shear
1A7H - Button Face Mill

Ø2.000-4.000”
.500” IC Insert with 8 indexes
.250” Max. depth of cut
Insert anti-rotation
Reliable performance, strength & economy!

Form-Master Shear
1A7K - Button Face Mill

Ø2.000-6.000”
16 mm IC Insert with 8 indexes
8 mm (.315”) Max. depth of cut
Insert anti-rotation
Reliable performance, strength & economy!

Form-Master Shear
1A7M - Button Face Mill

Ø2.500-6.000”
20 mm (.787”) IC Insert with 8 indexes
.393” (10 mm) Max. depth of cut
Insert anti-rotation
Reliable performance, strength & economy!

Form-Master Shear
1A7M - Button Face Mill

Ø3.000-6.000”
.750” IC Insert with 8 indexes
.375” Max. depth of cut
Insert anti-rotation
Reliable performance, strength & economy!

Form-Master Shear
35B6E - Axial Drive Slotter

Ø2.500-3.000"
8 mm (.315") Cutting Width
8 mm IC Button insert
Reliable performance, strength & economy!

Form-Master Shear
35B6E - Radial Drive Slotter

Ø2.500-3.000"
8 mm (.315") Cutting Width
8 mm IC Button insert
Reliable performance, strength & economy!

Form-Master Shear
35B6G - Axial Drive Slotter

Ø2.500-3.000"
10 mm (.394") Cutting Width
10 mm IC Button insert with 8 indexes
Insert anti-rotation
Reliable performance, strength & economy!

Form-Master Shear
35B6G - Radial Drive Slotter

Ø2.500-3.000"
10 mm (.394") Cutting Width
10 mm IC Button Insert with 8 indexes
Insert anti-rotation
Reliable performance, strength & economy!

Form-Master Shear
35B6H - Axial Drive Slotter

Ø3.250-5.000"
12 mm (.472") Cutting Width
12 mm IC Button insert with 8 indexes
Insert anti-rotation
Reliable performance, strength & economy!

Form-Master Shear
35B6H - Radial Drive Slotter

Ø3.250-5.000"
12 mm (.472") Cutting Width
12 mm IC Button Insert with 8 indexes
Insert anti-rotation
Reliable performance, strength!

Form-Master Shear
4W2A - Button Cartridge Face Mill

Ø8.000-12.000”
.750" IC Insert with 8 indexes
.375 Max. depth of cut
Four different insert edge preparations provide application flexibility
Cartridge pocket protection (sold separately)
Excellent performance & economy!

Form-Master Shear
RJET1204MOFN, 12 mm IC Round

Grd/Pol for Al - 6 mm R
Ideal for non-ferrous materials
8 Indexes

Form-Master Shear
RJET1605MOFN , 16 mm IC Round

Grd/Pol for Al - 8 mm R
Ideal for non-ferrous materials
8 Indexes

Form-Master Shear
RJLT0803MON , 8 mm IC Round

Precision, Pos - 4 mm R
Ideal for ferrous materials
Multiple Indexes

Form-Master Shear
RJLT0803MOTN, 8 mm IC Round

Standard, Pos - 4 mm R
Ideal for ferrous materials
Multiple Indexes

Form-Master Shear
RJLT1004MON, 10 mm IC Round

Precision, Pos - 5 mm R
Ideal for ferrous materials
Multiple Indexes

Form-Master Shear
RJLT1004MONLL, 10 mm IC Round

Precision, Pos - 5 mm R
Ideal for ferrous materials
8 Indexes

Form-Master Shear
RJLT1004MOTN, 10 mm IC Round

Standard, Pos - 5 mm R
Ideal for ferrous materials
8 Indexes

Form-Master Shear
RJLT1204MON, 12 mm IC Round

Precision, Pos - 6 mm R
Ideal for ferrous materials
8 Indexes

Form-Master Shear
RJLT1204MONLL, 12 mm IC Round

Precision, Pos - 6 mm R
Ideal for ferrous materials
8 Indexes

Form-Master Shear
RJLT1204MOTN, 12 mm IC Round

Standard, Pos - 6 mm R
Ideal for ferrous materials
8 Indexes

Form-Master Shear
RJLT1304MON, .500" IC Round

Precision, Pos - .250" R
Ideal for ferrous materials
8 Indexes

Form-Master Shear
RJLT1304MONLL, .500" IC Round

Precision, Pos - .250" R
Ideal for ferrous materials
8 Indexes

Form-Master Shear
RJLT1304MOTN, .500" IC Round

Standard, Pos - .250" R
Ideal for ferrous materials
8 Indexes

Form-Master Shear
RJLT1605MON , 16 mm IC Round

Precision, Pos - 8 mm R
Ideal for ferrous materials
Multiple Indexes

Form-Master Shear
RJLT1605MOTN, 16 mm IC Round

Standard, Pos - 8 mm R
Ideal for ferrous materials
8 Indexes

Form-Master Shear
RJLT1907MON, .750" IC Round

Precision, Pos - .375" R
Ideal for ferrous materials
8 Indexes

Form-Master Shear
RJLT1907MONLL, .750" IC Round

Precision, Pos - .375" R
Ideal for ferrous materials
8 Indexes

Form-Master Shear
RJLT1907MOTN, .750" IC Round

Standard, Pos - .375" R
Ideal for ferrous materials
8 Indexes

Form-Master Shear
RJLT2007MON, 20 mm IC Round

Precision, Pos - 10 mm R
Ideal for ferrous materials
Multiple Indexes

Form-Master Shear
RJLT2007MOTN, 20 mm IC Round

Standard, Pos - 10 mm R
Ideal for ferrous materials
8 Indexes

Form-Master Shear
RJLW0803MOTN, 8 mm IC Round

Heavy Duty, Flt - 4 mm R
Ideal for ferrous materials
Multiple Indexes

Form-Master Shear
RJLW1004MOTN, 10 mm IC Round

Heavy Duty, Flt - 5 mm R
Ideal for ferrous materials
8 Indexes

Form-Master Shear
RJLW1204MOTN, 12 mm IC Round

Heavy Duty, Flt - 6 mm R
Ideal for ferrous materials
8 Indexes

Form-Master Shear
RJLW1304MOTN, .500" IC Round

Heavy Duty, Fit - .250" R
Ideal for ferrous materials
8 Indexes

Form-Master Shear
RJLW1605MOTN, 16 mm IC Round

Heavy Duty, Flt - 8 mm R
Ideal for ferrous materials
8 Indexes

Form-Master Shear
RJLW1907MOTN, .750" IC Round

Heavy Duty, Flt - .375" R
Ideal for ferrous materials
8 Indexes

Form-Master Shear
RJLW2007MOTN, 20 mm IC Round

Heavy Duty, Flt - 10 mm R
Ideal for ferrous materials
8 Indexes

Form-Master V
15V1D - Backdrack & Finish End Mill

Ø1.000-1.250"
TopOn Connection
Insert with 4 indexes
.080" Max. depth of cut
Insert corner: 1 mm (.039") R

Form-Master V
15V1G - Backdraft Finish End Mill

Ø1.000-1.250"
TopOn Connection
Insert with 4 indexes
.118" Max. depth of cut
Insert radius: 2 mm (.078")

Form-Master V
15V1G - Backdraft Finish End Mill

Ø1.000"
Cylindrical Shank
Insert with 4 indexes
.118" Max. depth of cut
Insert corner radius: 2 mm (.078")
.040" Wiping flat

Form-Master V
5V6G - Backdraft Finish Face Mill

Ø2.00"
11 mm Insert with 4 indexes
.118" Max. depth of cut
.040" Wiping flat

Form-Master Wave
RCKX, .500" IC Round

.500" IC milling button insert
Single-sided insert

Form-Master Wave
RCLB

Milling button insert
Single-sided

Form-Master Wave
RCLT19, .750" IC Round

Button milling insert with chip breakers
Single-sided

Gold-Max 4
1SJ1F - 90° End Mill

Ø1.250-1.500"
Cat 40 Connection
11 mm Insert with 4 indexes
Insert corners: .031", .062", .093", .125" R
.42" Max. depth of cut

Gold-Max 4
1SJ1F - 90° End Mill

Ø1.000-1.500"
Weldon Shank
11 mm Insert with 4 indexes
Insert corners: .031", .062", .093", .125" R
.42" Depth of cut

Gold-Max 4
1SJ1F- 90° End Mill

Ø1.000-1.500"
TopOn Connection
11 mm Insert with 4 Indexes
Insert corners: .031", .062", .093", .125" R
.42" Depth of cut

Gold-Max 4
1SJ1Y- 90° End Mill

Ø.750-1.500"
Weldon Shank
Insert with 4 Indexes
Insert corners: .015" .031", .062" R
.31" Max depth of cut

Gold-Max 4
1SJ1Y- 90° End Mill

Ø.750-1.500"
TopOn Connection
Insert with 4 indexes
Insert corner: .015" .031", .062" R
.31" Max. depth of cut

Gold-Max 4
1SJ1Y- 90° End Mill

Ø.750"-1.000"
Chip Surfer Connection
Insert With 4 Indexes
Insert Corner: .015" .031", .062" R
.31" Depth of Cut

Gold-Max 4
2SJ3F - 90° End Mill

Ø1.250-2.000"
Weldon Shank
11 mm Insert with 4 indexes
Insert corners: .031", .062", .093", .125" R
All Eff./ RH Helix
1.14"-2.29" Max. depth of cut

Gold-Max 4
2SJ3F - 90° Shell Mill

Ø2.000-3.000"
Bore & Keyway
11 mm Insert with 4 indexes
Insert corners: .031", .062", .093", .125" R
All Eff./ RH Helix
2.66"-3.04" Max. depth of cut

Gold-Max 4
2SJ3J - 90° Shell Mill

Ø2.500-4.000"
Bore & Keyway
14.5 mm Insert with 4 indexes
Insert corners: .031", .062", .093", .125" R
All Eff./ RH Helix
2.44-3.90" Max. depth of cut

Gold-Max 4
2SJ3Y - 90° End Mill

Ø1.000-1.500"
Weldon Shank
8.4 mm Insert with 4 indexes
Insert corners: .015", .031", .062" R
All Eff./ RH Helix
1.14"-1.68" Max. depth of cut

Gold-Max 4
3EJ6F - Axial Drive Slotter

Ø4.000-10.000"
.625" Cutting Width
Insert with 4 indexes (2LH/2RH)
Insert radii: .031", .062", .093", .125"
Half Effective
High quality surface finish produced by wiper on all inserts

Gold-Max 4
3EJ6F - Radial Drive Slotter

Ø4.000-10.000"
.625" Cutting Width
Insert with 4 indexes (2LH/2RH)
Insert corners: .031", .062", .093", .125" R
Half Effective
High quality surface finish produced by wiper on all inserts

Gold-Max 4
3EJ6J - Axial Drive Slotter

Ø4.000-10.000"
.750" Cutting Width
Insert with 4 indexes (2LH/2RH)
Insert radii: .031", .062", .093", .125"
Half Effective
High quality surface finish produced by wiper on all inserts

Gold-Max 4
3EJ6J - Radial Drive Slotter

Ø4.000-12.000"
0.750" Cutting Width
Insert with 4 indexes (2LH/2RH)
Insert corners: .031", .062", .093", .125" R
Half Effective
High quality surface finish produced by wiper on all inserts

Gold-Max 4
3EJ6M - Axial Drive Slotter

Ø4.000-10.000"
1.000" Cutting Width
Insert with 4 indexes (2LH/2RH)
Half Effective
Insert radii: .031", .062", .093", .125"
High quality surface finish produced by wiper on all inserts

Gold-Max 4
3EJ6M - Radial Drive Slotter

Ø4.000-10.000"
1.000" Cutting Width
Insert with 4 indexes (2LH/2RH)
Insert corners: .031", .062", .093", .125" R
Half Effective
High quality surface finish produced by wiper on all inserts

Gold-Max 4
DGM, DGE, DFH, ZGM

Tangential Inserts with 4 Cutting Edges
RH, LH, & Ambidextrous Inserts
Metric Sizes: 8, 10.5, 11, 12.7, 14.5, & 15

Gold-Max 4
DGM315 for 3EJ6F 0.625" Width Slotters

Tangential Inserts with 4 Cutting Edges
2RH / 2LH Edges

Gold-Max 4
DGM325 for 3EJ6J 0.750" Width Slotters

Tangential Inserts with 4 Cutting Edges
2RH / 2LH Edges

Gold-Max 4
DGM426 for 3EJ6M 1.000" Width Slotters

Tangential Inserts with 4 Cutting Edges
2RH / 2LH Edges

Gold-Max 4
SJ2J - 90° Heavy-Duty Face Mill

Ø5.000-8.000"
Insert with 4 indexes
.54" Max. Depth of Cut
Replaceable steel seating pads ensure maximum cutter body life

Gold-Max 4
SJ5J, SJ6J - 90° Face Mill

Ø3.000-4.000"
14.5 mm Insert with 4 indexes
.54" Max. depth of cut
SJ5 High-density
SJ6 Medium-density

Gold-Max 4
SJ5Y, SJ6Y- 90° High-Density Face Mill

Ø1.500-2.500"
8.4 mm insert with 4 indexes
.31" Max. Depth of Cut
Insert corners: .015", .031", .062" R

Gold-Max 4
SJ6F, SJ5F- 90° Face Mill

Ø2.000-5.000"
11 mm Insert with 4 indexes
.42" Max. depth of cut
Insert corners: .031", .062", .093", .125" R
Medium-density

Gold-Max 4
SN2J - Heavy Duty 45° Face Mill

Ø3.00-8.00"
.32" Max. depth of cut
14.5 mm Insert with 4 indexes
Replaceable steel seating pads ensure maximum cutter body life

Gold-Max 4
SN6J - 45° Face Mill

Ø3.00-8.00"
.32" Max. depth of cut
14.5 mm Insert with 4 indexes
3 Insert types for every application

Gold-Max 4 FFIN
DFH324L001

Tangential Inserts with 4 Cutting Edges
APMX when using DFH324L001 is .040

Gold-Max 4 FFIN
EF6J - Hi-Feed Finishing Face Mill

Ø2.000-8.000"
14.5 mm Insert with 4 indexes
.040" Max. depth of cut
10° Lead angle hi-feed finisher
8-24 Ra Finish

Gold-Max 8
SGM

Milling Insert
12mm IC insert
Insert with 8 indexes

Gold-Max 8
VJ6K - 90° Face Mill

Ø2.000-8.000"
Insert with 8 indexes
.36" Max. depth of cut

Gold-Quad
25J3P - 90° End Mill

Ø2.000"
50 Taper Connection
13 mm Insert with 4 indexes
Insert corners: .031", .062", .125" R
All Eff. / RH Helix
Ideal for roughing SS & Hi-Temps

Gold-Quad
25J3P - 90° End Mill

Ø2.000"
Weldon Shank
13 mm Insert with 4 indexes
Insert Corner: .031", .062", & .125" R
All Eff. / RH Helix
Ideal for roughing SS & Hi-Temps

Gold-Quad
25J3P - 90° Shell Mill

Ø2.000-4.000"
Bore & Keyway
All Eff. / RH Helix
13 mm Insert with 4 indexes
Ideal for roughing SS & Hi-Temps
Insert corners: .031", .062", .125" R

Gold-Quad
25J3P_R - 90° End Mill for .25"R

Ø2.000"
50 Taper Connection
13 mm Insert
Side Insert with 4 indexes
End Insert Corner: .250" R with 2 indexes
Ideal for roughing SS & Hi-Temps
All Eff. / RH Helix

Gold-Quad
25J3P_R - 90° End Mill for .25"R

Ø2.000"
Weldon Shank
13 mm Insert
All Eff. / RH Helix
Ideal for roughing SS & Hi-Temps
Side Insert with 4 indexes
End Insert Corner: .250" R with 2 indexes

Gold-Quad
25J3P_R - 90° Shell Mill for .25"R

Ø2.000-4.000"
13 mm Insert
All Eff. / RH Helix
Ideal for roughing SS & Hi-Temps
Side Insert with 4 indexes
End insert corner: .250" R with 2 indexes

Gold-Quad
5J5P - 90° Face Mill

Ø2.000-4.000"
13 mm Insert with 4 indexes
.45" Depth of Cut
Finishes as good as 40 Ra
Insert corners: .031, .047, .062, .093, .125"

Gold-Quad
QHU - Plunge Rough End Mill

Ø1.500"
TopOn Connection
13 mm Insert with 4 indexes
.45" Depth of cut
Insert corners: .031", .047", .062", .094", .125" R

Gold-Quad
QHU - Plunge Rough Mill

Ø2.00-4.00"
.44" Depth of cut
13 mm Insert with 4 indexes
Insert corners: .031", .047", .062", .094", .125" R

Gold-Quad
QHU - Plunge Rough Mill

Ø1.500"
Cylindrical Shank
13 mm Insert with 4 indexes
Insert corners: .031", .047", .062", .094", .125" R
.45" Depth of cut

Gold-Quad
SDES13

Gold Quad Insert

Gold-Quad
SDMS13

Gold Quad Insert

Gold-Quad
SDXS1305_

Gold Quad Insert
GoldSfeed MPR High Feed Inserts

Gold-Quad Extcut
5J5P-R - 90° Face Mill

Ø2.000-4.000"
13 mm Insert with 2 indexes
.45" Depth of Cut
Finishes as good as 40 Ra
Insert Corner: .250"

Gold-Quad XXX
5G5Q, 5G6Q - Mid Feed Face Mill

Ø2.500-6.000”
16 mm IC insert with 4 indexes
.250" (6.4 mm) Max. depth of cut
30° Mid-feed rougher
Three different insert edge preparations provide application flexibility
Extremely free cutting!
Excellent high feed performance & economy!

Gold-Quad XXX
5M5M, 5M6M - Mid-Feed Face Mill

Ø4.000-6.000”
19 mm IC insert with 4 indexes
.310" (7.87 mm) Max. depth of cut
30° Mid-feed rougher
Multiple insert styles for application flexibility
High material removal rates!
Extremely free cutting!
Excellent performance & economy!

Gold-Quad XXX
5M5P, 5M6P - Mid-Feed Face Mill

Ø2.000-3.000”
13 mm IC insert with 4 indexes
.200" (5.08 mm) Max. depth of cut
30° Mid-feed rougher
Multiple insert styles for application flexibility
High material removal rates!
Extremely free cutting!
Excellent Performance & Economy!

GoldSFeed
15G1B - Hi-Feed End Mill

Ø.375-.750"
Cylindrical Shank
4 mm insert with 4 indexes
.0236" Max. depth of cut
Three different insert edge preparations provide application flexibility
Outboard wiper produces high-quality shoulder surface finish

GoldSFeed
15G1B - Hi-Feed End Mill

Ø.375-.750"
Chip Surfer Connection
4 mm insert with 4 indexes
.0236" Max. depth of cut
Three different insert edge preparations provide application flexibility
Outboard wiper produces high-quality shoulder surface finish

GoldSFeed
15G1B - Hi-Feed End Mill

Ø.500-.750"
TopOn Connection
4 mm insert with 4 indexes
.0236" Max. depth of cut
Three different insert edge preparations provide application flexibility
Outboard wiper produces high-quality shoulder surface finish

GoldSFeed
15G1D - Hi-Feed End Mill

Ø.625-1.250"
Cylindrical Shank
6 mm insert with 4 indexes
.040" Max. depth of cut
Three different insert edge preparations provide application flexibility
Outboard wiper produces high-quality shoulder surface finish

GoldSFeed
15G1D - Hi-Feed End Mill

Ø.625-1.000"
Chip Surfer Connection
6 mm insert with 4 indexes
.040" Max. depth of cut
Three different insert edge preparations provide application flexibility
Outboard wiper produces high-quality shoulder surface finish

GoldSFeed
15G1D - Hi-Feed End Mill

Ø.625-1.500"
TopOn Connection
6 mm insert with 4 indexes
.040" Max. depth of cut
Three different insert edge preparations provide application flexibility
Outboard wiper produces high-quality shoulder surface finish

GoldSFeed
15G1F- Hi-Feed End Mill

Ø1.250-1.500"
Weldon Shank
9mm insert with 4 indexes
.060" Max. depth of cut
Outboard wiper produces high-quality shoulder surface finish

GoldSFeed
15G1F- Hi-Feed End Mill

Ø1.000-1.500"
Cylindrical Shank
9 mm Insert with 4 indexes
.060" Max. Depth of Cut
Outboard wiper produces high-quality shoulder surface finish

GoldSFeed
15G1F- Hi-Feed End Mill

Ø1.000-1.500"
TopOn Connection
9 mm inserts with 4 indexes
.060" Max. depth of cut
Superior high-feed semi finish laid by both axial and radial wipers

GoldSFeed
15M1P - Hi-Feed End Mill

Ø 32, 35 & 40 mm
TopOn Connection
13 mm insert with 4 indexes
2.23 mm Max. depth of cut

GoldSFeed
15M1P - Hi-Feed End Mill

Ø1.250- 1.500"
Weldon Shank
13mm insert with with 4 indexes
.088" Max. Depth of Cut

GoldSFeed
15M1P - Hi-Feed End Mill

Ø1.250"
Cylindrical Shank
13 mm insert with 4 indexes
.088" Max. depth of cut

GoldSFeed
15M1P - Hi-Feed End Mill

Ø1.250"
TopOn Connection
13 mm insert with 4 indexes
.088" Max. depth of cut

GoldSFeed
5G1D - Hi-Feed Face Mill

Ø1.500-2.000”
6 mm insert with 4 indexes
.040" (1.5 mm) Max. depth of cut
12° Hi-feed rougher
Multiple insert styles for application flexibility
.040” Insert wiper, face and O.D.
Extremely free cutting!
Excellent performance & economy!

GoldSFeed
5G5F, 5G6F - Hi-Feed Face Mill

Ø2.000-3.000”
9 mm insert with 4 indexes
.060" (1.5 mm) Max. depth of cut
12° Hi-feed rougher
Multiple insert styles for application flexibility
.060” Insert wiper, face and O.D.
Extremely free cutting!
Excellent performance & economy!

GoldSFeed
5G5M, 5G6M - Hi-Feed Face Mill

Ø3.000-7.000”
19 mm insert with 4 indexes
.147" (3.7 mm) Max. depth of cut
12° Hi-feed rougher
Seven different insert edge preparations provide application flexibility
Extremely free cutting!
Excellent Hi-Feed performance & economy!

GoldSFeed
5G5M, 5G6M - Hi-Feed Face Mill

Ø80-160 mm
19 mm insert with 4 indexes
.147" (3.7 mm) Max. depth of cut
12° Hi-feed rougher
Seven different insert edge preparations provide application flexibility
Extremely free cutting!
Excellent Hi-Feed performance & economy!

GoldSFeed
5G5Q, 5G6Q - Hi-Feed Face Mill

Ø2.500-10.000”
16 mm insert with 4 indexes
.107" (2.7 mm) Max. depth of cut
12° Hi-feed rougher
Three different insert edge preparations provide application flexibility
Extremely free cutting!
Excellent high feed performance & economy!
8" and 10" diameter tools do NOT have coolant through.

GoldSFeed
5M5P, 5M6P - Hi-Feed Face Mill

Ø 50-100 mm
13 mm insert with 4 indexes
.088" (2.2 mm) Max. depth of cut
12° Hi-feed rougher
Seven different insert edge preparations provide application flexibility
Extremely free cutting!
Excellent hi-feed performance & economy!

GoldSFeed
5M5P, 5M6P - Hi-Feed Face Mill

Ø2.000-5.000”
13 mm insert with 4 indexes
.088" (2.2 mm) Max. depth of cut
12° Hi-feed rougher
Seven different insert edge preparations provide application flexibility
Extremely free cutting!
Excellent hi-feed performance & economy!

GoldSFeed
SD_S0402MPR_

4mm(.157) GoldSFeed Insert

GoldSFeed
SD_S0603MPR_

6mm GoldSFeed Insert

GoldSFeed
SD_S0904MPR_

9mm GoldSFeed Insert

GoldSFeed
SD_S1305MPR_

13mm GoldSFeed Insert

GoldSFeed
SD_S1605MPR_

16mm GoldSFeed Insert

GoldSFeed
SD_S1906MPR_

19mm GoldSFeed Insert

Gold-Slot
3VJ4V - Axial Drive Slotter

Ø3.000-6.000"
0.187" Cutting Width
Inserts with 4 indexes
Same insert used in RH & LH stations

Gold-Slot
3VJ4V - Axial Drive Slotter

Ø4.000-8.000"
0.250" Cutting Width
Inserts with 4 indexes
Same insert used in RH & LH stations

Gold-Slot
3VJ4V - Axial Drive Slotter

Ø4.000-8.000"
0.312" Cutting Width
Inserts with 4 indexes
Same insert used in RH & LH stations

Gold-Slot
3VJ4V - Axial Drive Slotter

Ø3.000-6.000"
0.156" Cutting Width
Inserts with 4 indexes
Same insert used in RH & LH stations

Gold-Slot
3VJ4V - Axial Drive Slotter

Ø4.000-8.000"
0.500" Cutting Width
Inserts with 4 indexes
Same insert used in RH & LH station.

Gold-Slot
3VJ4V - Axial Drive Slotter

Ø4.000-8.000"
0.375" Cutting Width
Inserts with 4 indexes
Same insert used in RH & LH stations

Gold-Slot
3VJ4V - Axial Drive Slotter

Ø3.000-4.000"
0.125" Cutting Width
Inserts with 4 indexes
Same insert used in RH & LH stations