Series: 5X6W - 90° Router Face Mill for Aluminum (Metric)
Product Series Features:
- Ø50.00 - 80.00 mm
- 14 mm Insert with 2 indexes
- 15.7 mm Depth of Cut
- Finishes as good as 15 Ra
- Insert corners: .020", .031", .062", .093", .125" R
EDP |
Part Number |
DC Cutting Dia. |
OAL Overall Length |
ZEFF Eff. Teeth |
DCON Bore Dia. |
KWW Keyway |
RMPX Ramp Angle Max. |
RPMX RPM Max. |
|
|---|---|---|---|---|---|---|---|---|---|
| 3019995 | 5X6W050R00 | 50.00 mm | 50.00 mm | 4 | 22.00 mm | 10.40 mm | 6.2 | 20000 | |
| 3019996 | 5X6W052R00 | 52.00 mm | 50.00 mm | 4 | 22.00 mm | 10.40 mm | 6.0 | 20000 | |
| 3019997 | 5X6W063R00 | 63.00 mm | 50.00 mm | 5 | 27.00 mm | 12.40 mm | 4.7 | 20000 | |
| 3019998 | 5X6W066R00 | 66.00 mm | 50.00 mm | 5 | 27.00 mm | 12.40 mm | 4.5 | 20000 | |
| 3019999 | 5X6W080R00 | 80.00 mm | 50.00 mm | 5 | 27.00 mm | 12.40 mm | 3.7 | 20000 |
Notes:
- Max RPM applies to a properly balanced assembly to G2.5 (toolholder, cutter & inserts).
- To load inserts, lightly tighten both screws first. Next, tighten screw in pocket corner. Finally, tighten screw at cutter face.
 |
Balanced |
