Series: 12J1R - 90° End Mill
Product Series Features:
- Ø.750-1.500"
- Weldon Shank
- 13 mm Insert with 2 indexes
- Insert corners: .015", .031", .062", .078", .093", .125", .156 R
- 32-63 Ra surface finishes when engaging the wiper (WEP)
- .47" Depth of cut
EDP |
Part Number |
DC Cutting Dia. |
LUX Usable Length Max. |
LPR Protruding Length |
OAL Overall Length |
ZEFF Eff. Teeth |
DCON Shank Dia. |
RMPX Ramp Angle Max. |
DXF File |
STEP Light File |
STEP Detailed File |
|
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 2916683 | 12J1R-0701284R01 | 0.750 | 1.22 | 1.25 | 3.25 | 2 | 0.7500 | 6.3 | NA | |||
| 3080016 | 12J1R-0702084R01 | 0.750 | 1.97 | 2.00 | 4.00 | 1 | 0.7500 | 6.3 | NA | NA | ||
| 2916682 | 12J1R-0703084R01 | 0.750 | 2.97 | 3.00 | 5.00 | 2 | 0.7500 | 6.3 | NA | |||
| 3082447 | 12J1R-1001780R01 | 1.000 | 1.72 | 1.75 | 4.00 | 3 | 1.0000 | 7.9 | NA | |||
| 3082449 | 12J1R-1003780R01 | 1.000 | 3.72 | 3.75 | 6.00 | 3 | 1.0000 | 7.9 | ||||
| 3082450 | 12J1R-1202281R01 | 1.250 | 2.22 | 2.25 | 4.50 | 4 | 1.2500 | 3.1 | NA | |||
| 2916681 | 12J1R-1204281R01 | 1.250 | 4.22 | 4.25 | 6.50 | 4 | 1.2500 | 3.1 | NA | |||
| 2916679 | 12J1R-1501781R01 | 1.500 | 1.72 | 1.75 | 4.00 | 5 | 1.2500 | 2.3 | NA | |||
| 3082457 | 12J1R-1502281R01 | 1.500 | 2.22 | 2.25 | 4.50 | 4 | 1.2500 | 2.3 | NA | |||
| 2916680 | 12J1R-1504281R01 | 1.500 | 4.22 | 4.25 | 6.50 | 4 | 1.2500 | 2.3 | NA |
Notes:
- Relieve cutter body when using insert corner radii larger than R.078 (see product bulletin).
