Tool Holders

Driver Bits

Standard Driver Bit
Hex, Torx, and Torx Plus drive options
NOTE: Images shown are a representation of the product series only and may not be an actual representation of each specific product within the series

TB CONECTOR

High Pressure Coolant Connector

TB COPPER SEAL

High Pressure Coolant Copper Seal

TB ELBOW FITTING

High Pressure Coolant Elbow Fitting
*See Notes Below

TB HOSE

High Pressure Coolant Hose

TB STRAIGHT FITTING

High Pressure Coolant Straight Fitting Adapter
*See Notes below

Torque Test Bar

Torque Test Bar for Hydraulic Chuck
Optional Accessory Item - Sold separately

C-Adapter
C*AD*BT

BT MAS-403
C-Adapter (ISO 26623-2)
Quick Change Adapter
AD Style Coolant (coolant though the center) except where noted as ABD Style

C-Adapter
C*AD*CAT

CAT V-Flange
C-Adapter (ISO 26623-2)
Quick Change Adapter
AD Style Coolant (coolant through the center) except where noted as ABD Style Coolant

C-Adapter
C*AD*HSKA

HSK-A (DIN 69893/A)
C-Adapter (ISO 26623-2)
Quick Change Adapter
*See Notes below

C-Adapter
C*AD*SK (DIN 69871)

DIN69871 (SK) V-Flange
C-Adapter (ISO 26623-2)
Quick Change Adapter
AD Style Coolant (coolant through the center) except where noted as ABD Style Coolant

C-Adapter
C*EX*C

C-Adapter (ISO 26623-1)
C-Adapter (ISO 26623-2)
Quick Change Extension
NOTE: Extensions do not have the Data Chip Provision slot

C-Adapter
C*RE*C

C-Adapter (ISO 26623-1)
C-Adapter (ISO 26623-2)
Quick Change Reducer
NOTE: Reducers do not have the Data Chip Provision slot

Chip-Surfer
C*T

C-Adapter (ISO 26623-1)
Chip Surfer Connection
Neck Relief
Quick Change Holder
AD Style with Ported Coolant delivery
Do not apply lubricant to the threaded connection.
*See Notes below

Chip-Surfer
C*T (Metric)

C-Adapter (ISO 26623-1)
Chip Surfer Connection
Neck Relief
Quick Change Holder
AD Style with Ported Coolant delivery
Do not apply lubricant to the threaded connection
*See Notes below

Chip-Surfer
DIN69871*T (Metric)

DIN69871 V-Flange
Chip Surfer Connection
AD Style Coolant (coolant through the center)
Balanced G2.5@20,000 RPM
Do not apply lubricant to the threaded connection

Chip-Surfer
ER*T - Solid ER, Neck Relief

Solid ER
Chip Surfer Connection
Neck Relief
Coolant Options

Chip-Surfer
HSKA*T

HSK-A (DIN 69893/A)
Chip Surfer Connection
Balanced G2.5@20,000 RPM
AD Style Coolant
Do not apply lubricant to the threaded connection
*See Notes below

Chip-Surfer
HSKA*T (Metric)

HSK-A (DIN 69893/A)
Chip Surfer Connection
Balanced G2.5@20,000 RPM
AD Style Coolant
Do not apply lubricant to threaded connection
*See Notes below

Chip-Surfer
S*T*CA - Carbide Shank, Necked

Cylindrical Shank
Chip Surfer Connection
Neck Relief
Shank modifications can be made by cutting off the back to desired length or turning back neck for more usable length

Chip-Surfer
S*T*CA - Carbide Shank, Necked

Cylindrical Shank (Metric)
Chip Surfer Connection
Neck Relief
Coolant options
Shank modifications can be made by cutting off the back to desired length or turning back neck for more usable length

Chip-Surfer
S*T*CA - Carbide Shank, No Neck

Cylindrical Shank
Chip Surfer Connection
No Neck Relief
Due to tolerance, shank diameter will be slightly larger than tip diameter. .010" per side neck modification required for clearance when milling 90° shoulder

Chip-Surfer
S*T*CA - Carbide Shank, No Neck

Cylindrical Shank (Metric)
Chip Surfer Connection
No Neck Relief
Coolant options
Due to tolerance, shank diameter will be slightly larger than tip diameter. .010" per side neck modification required for clearance when milling 90° shoulder

Chip-Surfer
S*T*CK - Carbide Shank, Cone Neck

Cylindrical Shank
Chip Surfer Connection
Conical Neck

Chip-Surfer
S*T*CK - Carbide Shank, Cone Neck

Cylindrical Shank (Metric)
Chip Surfer Connection
Conical Neck

Chip-Surfer
S*T*HA - Heavy Metal Shank, Necked

Cylindrical Shank (Metric)
Chip Surfer Connection
Neck Relief
Coolant options
Shank modifications can be made by cutting off the back to desired length or turning back neck for more usable length

Chip-Surfer
S*T*HA - Heavy Metal Shank, No Neck

Cylindrical Shank
Chip Surfer Connection
No Neck Relief
Due to tolerance, shank diameter will be slightly larger than tip diameter. .010" per side neck modification required for clearance when milling 90° shoulder

Chip-Surfer
S*T*HK - Heavy Metal, Cone Neck

Cylindrical Shank (Metric)
Chip Surfer Connection
Conical Neck
Coolant options

Chip-Surfer
S*T*NA - Steel Shank, Thrust Cool

Cylindrical Shank
Chip Surfer Connection
Neck Relief
Thrust Cool System equipped with brazed Coolant Collar and Coolant Grooves for precise delivery down the Neck OD to the tip's cutting edges
Thrust Cool Shanks are ideal for use with carbide tips that do not have coolant holes

Chip-Surfer
S*T*SA - Steel Shank, Necked

Cylindrical Shank
Chip Surfer Connection
Neck Relief
Shank modifications can be made by cutting off the back to desired length or turning back neck for more usable length

Chip-Surfer
S*T*SA - Steel Shank, Necked

Cylindrical Shank (Metric)
Chip Surfer Connection
Neck Relief
Coolant options
Shank modifications can be made by cutting off the back to desired length or turning back neck for more usable length

Chip-Surfer
S*T*SA - Steel Shank, No Neck

Cylindrical Shank (Metric)
Chip Surfer Connection
No Neck Relief
Coolant options
Due to tolerance, shank diameter will be slightly larger than tip diameter. .010" per side neck modification required for clearance when milling 90° shoulder

Chip-Surfer
S*T*SA - Steel Shank, No Neck

Cylindrical Shank
Chip Surfer Connection
No Neck Relief
Due to tolerance, shank diameter will be slightly larger than tip diameter. .010" per side neck modification required for clearance when milling 90° shoulder

Chip-Surfer
S*T*SA - Steel Weldon, Necked

Weldon Shank (Metric)
Chip Surfer Connection
Stubby Neck Relief

Chip-Surfer
S*T*SK - Steel Shank, Cone Neck

Cylindrical Shank
Chip Surfer Connection
Conical Neck

Chip-Surfer
S*T*SK - Steel Shank, Cone Neck

Cylindrical Shank (Metric)
Chip Surfer Connection
Conical Neck

Chip-Surfer
S_T_K - Steel Weldon, Cone Neck

Flatted Cylindrical Shank (Metric)
Chip Surfer Connection
Conical Neck

Chip-Surfer
T_T_SA - Extension

Chip Surfer to Chip Surfer
Neck Relief

Chip-Surfer
Torque Wrench (Adjustable) CHIP SURFER

Adjustable Torque Handle, Wrench Heads, and Drivers for secure & accurate tightening of Chip Surfer Tips
Components are sold individually, and are not available as an assembly or a set

Chip-Surfer
Torque Wrench (Pre-Set) CHIP SURFER

Pre-Set Torque Wrench Handle with Replaceable Thin Open End Wrench Head that fits Chip Surfer tip wrench flats
No lubricant on adaption
Optional Accessory Item

Chip-Surfer
W*T*SA - Steel Weldon, Necked

Weldon Shank
Chip Surfer Connection
Stubby Neck Relief

Chip-Surfer
WB_T_K - Steel Weldon, Cone Neck

Cylindrical Shank with Flat
Chip Surfer Connection
Conical Neck

Chip-Surfer
Wrench CHIP SURFER

Thin Open End Wrenches for use with Chip Surfer tips
Do not use lubricant on adaption
When assembling, be sure tip is seated firmly on shank with no
Optional Accessory Item
Tip should seat firmly on shank with no gap when assembling

CoolBurst
QWIK CHANGE COUPLING SYSTEM

Coupling System for use with Cool-Burst holders
Hose Set, Hose, and Connector are sold separately

Deep-Twist
GDV Drivers

Inch GDV Deep Twist Drivers
Weldon, Cylindrical, and Whistle Notch Driving Shanks
For Use with Threaded Adaption Deep Twist Drill Bodies

Deep-Twist
GDV Drivers (Metric)

Metric GDV Deep Twist Drivers
Weldon, Cylindrical, and Whistle Notch Driving Shanks
For Use with Threaded Adaption Deep Twist Drill Bodies

Inno-Fit
BT*Z*SA

BT MAS-403 Spindle Adapter
Innofit Heavy Duty Modular Adaption
AD Style Coolant
Strong drive pin design with 3-point clamping & self-centering connections
Change cutter heads right on the spindle
Resists bending forces uniformly
Transmits axial forces from cut-to-spindle
Complete with sealing & tensioning screws

Inno-Fit
CAT*Z*SA

CAT Spindle Adapter
Innofit Heavy Duty Modular Adaption
AD Style Coolant
Strong drive pin design with 3-point clamping & self-centering connections
Change cutter heads right on the spindle
Resists bending forces uniformly
Transmits axial forces from cut-to-spindle
Complete with sealing & tensioning screws

Inno-Fit
DIN69871*Z*SA

DIN 69871 Form AD Spindle Adapter
Innofit Heavy Duty Modular Adaption
AD Style Coolant
Strong drive pin design with 3-point clamping & self-centering connections
Change cutter heads right on the spindle
Resists bending forces uniformly
Transmits axial forces from cut-to-spindle
Complete with sealing & tensioning screws

Inno-Fit
HSKA*Z*SA

HSK-A (DIN 69893/A) Spindle Adapter
Innofit Heavy Duty Modular Adaption
Coolant Through
Strong drive pin design with 3-point clamping & self-centering connections
Change cutter heads right on the spindle
Resists bending forces uniformly
Transmits axial forces from cut-to-spindle
Complete with sealing & tensioning screws
*See Notes below

Inno-Fit
Z*MOD*SK

InnoFit to Top On Adapter
TopOn Adapter for the modular InnoFit System
Coolant Through
Interchangeable with Inch and Metric Heads
*See Notes below

Inno-Fit
Z*SM*SA

Modular Innofit System
Face Mill Adapter
Coolant Through Center except where noted

Inno-Fit
Z*SM*SA

Modular Innofit System
Face Mill Adapter (Metric)
Coolant Through Center except where noted

Inno-Fit
Z*Z*SA

Extensions for Innofit Modular System
Strong Drive Pin Design with 3 Point Clamping
Self Centering Connections
Interchangeable with Inch and Metric heads
Coolant Through
*See Notes below

Inno-Fit
Z5Z4SA

Reducing Adapter for the Innofit Modular System
Strong Drive Pin Design with 3 Point Clamping
Self Centering Connections
Interchangeable with Inch and Metric heads
Coolant Through
*See Notes below

Qwik-Torque
QWIK*TORQUE SYSTEM

Interchangeable multi-component system consisting of Handle, Preset Torque Adapter Unit & Driver Bit
1/4" Drive Magnetic Locking Adaption
Reversible system in Preset Torque Adapter Unit enables both tightening & loosening of screws while the radial friction design with non-ratchet torque socket prevents overtightening & stripping of screws
All components sold separately
*See Notes Below

T-Absorber
C*DT*A*D

C-Adapter (ISO 26623-1)
Quick Change Serrated ConnectionShanks for T-Absorber Interchangeable Heads
300 Bar Max PSI

T-Absorber
C*DT*D*TB (Metric)

C-Adapter (ISO 26623-1)
Quick Change Adapter for T-Absorber Anti-Vibration Tools
100 Bar Max PSI

T-Absorber
C*DT*E*D

C-Adapter (ISO 26623-1)
Quick Change Serrated ConnectionShanks with Carbide Core for T-Absorber Interchangeable Heads
300 Bar Max PSI

T-Micro
PF FITTING

Coolant Fitting for use with T-Micro Holders and Sleeves

T-Micro Holders
MINS

Single ended T-Micro sleeve

T-Micro Holders
MINS

Single ended T-Micro sleeve (Metric)

T-Micro Holders
MINSL

Double ended T-Micro sleeve
All sleeves applicable for Citizen Swiss type machine

T-Micro Holders
MINSL

Double ended T-Micro sleeve (Metric)
All sleeves applicable for Citizen Swiss type machine

Tool Holders
ADJBT*ER

BT MAS-403
Center Alignment ER Collet Chuck DIN 6499
AD Style Coolant (Coolant through the Center)
For use with Qwik Ream & Unidex Tooling
Radial adjustment 0.05 mm
Angular adjustment 1°

Tool Holders
ADJC*ER

C-Adapter (ISO 26623-1)
Center Alignment ER Collet Chuck DIN 6499
Quick Change Holder
For use with Qwik Ream & Unidex Tooling
Radial adjustment .002"
Angular adjustment 1°

Tool Holders
ADJCAT*ER

CAT V-Flange
Center Alignment ER Collet Chuck DIN 6499
Coolant through the Center
For use with Qwik Ream & Unidex Tooling
AD Style Coolant (coolant through the center)
Radial adjustment .002"
Angular adjustment 1°

Tool Holders
ADJDIN69871*ER

DIN69871 V-Flange
Center Alignment ER Collet Chuck DIN 6499
For use with Qwik Ream & Unidex Tooling
AD Style Coolant (Coolant through the Center)
Radial adjustment 0.05mm
Angular adjustment 1°

Tool Holders
ADJHSKA*ER

HSK-A (DIN 69893/A)
Center Alignment ER Collet Chuck DIN 6499
Quick Change Holder
For use with Qwik Ream & Unidex Tooling
Radial adjustment .002"
Angular adjustment 1°

Tool Holders
ADJST*ER

INCH Weldon Shank
Center Alignment ER Collet Chuck DIN 6499
Quick Change Tool Holder
For use with Qwik Ream & Unidex Tooling
Radial adjustment .008"
Angular adjustment 1°
Central Coolant Hole

Tool Holders
ADJST*ER (Metric)

METRIC Weldon Shank
Center Alignment ER Collet Chuck DIN 6499
Quick Change Holder
For use with Qwik Ream & Unidex Tooling
Radial adjustment .008"
Angular adjustment 1°
Central coolant hole

Tool Holders
BT*EM

BT MAS-403
INCH Weldon End Mill Holder DIN 6359/DIN 1835 Form B
AD Style Coolant (coolant through the center)

Tool Holders
BT*EM (Metric)

BT MAS-403
METRIC Weldon End Mill Holder DIN 6359/DIN 1835 Form B
AD Style Coolant (coolant through the center)

Tool Holders
BT*EM*E (Metric)

BT MAS-403
Whistle Notch End Mill/Drill Holder DIN6359/1835 Form E
AD Style Coolant (coolant through the center)

Tool Holders
BT*ER

BT MAS-403
ER Collet Chuck DIN6499
AD Style Coolant (coolant through the center)
Balanced G6.3@12,000RPM
(Note: Some BT40 holders under 100 mm GL are balanced G2.5@20,000 RPM)

Tool Holders
BT*ER*SHORT

BT MAS-403
ER Short Collet Chuck DIN 6499
Balanced G2.5@20,000RPM
AD Style Coolant (coolant through the center)

Tool Holders
BT*FC*EM

BT MAS-403 Face Contact
INCH Weldon End Mill Holder DIN 1835 Form B
AD Style Coolant (coolant through the center)
Balanced G2.5@25,000RPM

Tool Holders
BT*FC*EM (Metric)

BT MAS-403 Face Contact
METRIC Weldon End Mill Holder DIN 1835 Form B
AD Style Coolant (coolant through the center)

Tool Holders
BT*FC*ER

BT MAS-403 Face Contact
ER Collet Chuck DIN 6499
ADB Convertible through the center or through the flange coolant delivery
BT40 balanced G2.5@20,000RPM
BT50 balanced G2.5@15,000RPM

Tool Holders
BT*FC*FM

BT MAS-403 Face Contact
Face Mill Holder DIN 6357 (Metric)
AD Style Coolant except where noted
BT40 balanced G2.5@20,000RPM
BT50 balanced G2.5@15,000RPM
Note: 60mm Pilot is 4-Bolt pattern adaption only with no lock screw. 40mm Pilot has 4-Bolt pattern and lock screw adaption
*Peripheral clamping screws are not supplied with holder

Tool Holders
BT*FC*HYDRO (Metric)

BT MAS-403 Face Contact
METRIC Hydraulic Milling Chuck
High runout accuracy of < 0.003 mm
For use in Reaming, Drilling, Finish Milling, and fine, accurate machining applications
Balanced G2.5@18,000 RPM
Chucking forces will be reduced by 25% when using sleeves
*See Notes below

Tool Holders
BT*FC*MAXIN (Metric)

BT MAS-403 Face Contact
METRIC Power Milling Chuck
Chucking forces will be reduced by 25% when reduction sleeves are used
Optional reduction sleeves should be ordered separately
*Note: Preset screws are compatible with milling chuck sleeves only, they are not compatible for use with the holder alone

Tool Holders
BT*FC*SEM*C

BT MAS-403 Face Contact
Shell Mill Holder with Coolant Holes ISO 3937 (Metric)
AD Coolant with Ported Coolant Delivery
BT30 & BT40 balanced G2.5@20,000RPM
BT50 balanced G2.5@15,000RPM

Tool Holders
BT*FC*SEM*C

BT MAS-403 Face Contact
Shell Mill Holder with Coolant Holes ISO 3937
AD Style Ported Coolant Delivery
Balanced G2.5@20,000RPM

Tool Holders
BT*FC*SRKIN (Metric)

BT MAS-403 Face Contact
METRIC Thermal Shrink Chucks
AD Style Coolant (coolant through the center)
BT40 balanced G2.5@20,000RPM
BT50 balanced G2.5@15,000RPM
For use in Induction style heating units only

Tool Holders
BT*FM

BT MAS-403
Face Mill Holder DIN 6357
AD Style Coolant except where noted

Tool Holders
BT*FM

BT MAS-403
Face Mill Holder DIN 6357 (Metric)
AD Style Coolant except where noted
**Note: 60mm Pilot is 4-Bolt pattern adaption only with no lock screw. 40mm Pilot has 4-Bolt pattern and lock screw adaption

Tool Holders
BT*HYDRO (Metric)

BT MAS-403
METRIC Hydraulic Milling Chuck
High runout accuracy of < 0.003 mm
For use in Reaming, Drilling, Finish Milling, and fine, accurate machining applications
BT30/BT40 balanced G6.3@18,000 RPM
BT50 balanced G6.3@12,000 RPM
Chucking forces will be reduced by 25% when using sleeves
*See Notes below

Tool Holders
BT*HYDRO*HD (Metric)

BT MAS-403
METRIC Heavy Duty Hydraulic Milling Chuck
High runout accuracy of < 0.003 mm
For use in Reaming, Drilling, Tapping, and difficult high volume machining applications
Balanced G2.5@25,000 RPM
Chucking forces will be reduced by 25% when reduction sleeves are used
*See Notes below

Tool Holders
BT*MAXIN

BT MAS-403
INCH Power Milling Chuck
Chucking forces will be reduced by 25% when reduction sleeves are used
Optional reduction sleeves should be ordered separately
*Note: Preset screws are compatible with milling chuck sleeves only, they are not compatible for use with the holder alone

Tool Holders
BT*MAXIN (Metric)

BT MAS-403
METRIC Power Milling Chuck
Chucking forces will be reduced by 25$% when reduction sleeves are used
Optional reduction sleeves should be ordered separately
*Note: Preset screws are compatible with milling chuck sleeves only, they are not compatible for use with the holder alone

Tool Holders
BT*SEM

BT MAS-403
Shell Mill Holder ISO 3937 (Metric)
AD or ADB Style Coolant as noted

Tool Holders
BT*SEM

BT MAS-403
Shell Mill Holder ISO 3937
AD Style Coolant

Tool Holders
BT*SEM*C (Metric)

BT MAS-403
Shell Mill Holder with Coolant Holes ISO 3937 (Metric)
ADB Style Coolant with Ported Coolant Delivery
BT40 balanced G2.5 @ 20,000 RPM
BT50 balanced G2.5 @ 15,000 RPM

Tool Holders
BT*SEMC

BT MAS-403
Combi Shell Mill Holder (Metric)
AD Style Coolant Delivery

Tool Holders
BT*SRK (Metric)

BT MAS-403
METRIC Thermal Shrink Chuck
AD Style Coolant (coolant through the center)
Balanced G2.5@25,000RPM

Tool Holders
BT*SRKIN

BT MAS-403
INCH Thermal Shrink Chuck
AD Style Coolant (coolant through the center)
For use with Inductive Heating devices ONLY
-C Indicates coolant ports in nose
BT40 balanced G2.5@25,000RPM

Tool Holders
BT*SRKIN (Metric)

BT MAS-403
METRIC Thermal Shrink Chuck
AD Style Coolant (coolant through the center)
For use with Inductive Heating Device ONLY
BT40 balanced G2.5@25,000RPM
BT50 balanced G2.5@20,000RPM

Tool Holders
BT*STUB

BT MAS-403
Slotting Cutter Stub Arbor
For use with axial drive cutters

Tool Holders
C*ABB

C-Adapter (ISO 26623-1)
Quick Change Adapter for Boring Bars with Reducing Sleeves
1450 PSI Max

Tool Holders
C*ABB (Metric)

C-Adapter (ISO 26623-1)
Quick Change Adapter for Boring Bars with Reducing Sleeves
1450 PSI Max

Tool Holders
C*ABB*C (Metric)

C-Adapter (ISO 26623-1)
Quick Change Adapter for Boring Bars with Reducing Sleeves
Ported Coolant Delivery
1450 PSI Max

Tool Holders
C*ADI (Metric)

C-Adapter (ISO 26623-1)
Quick Change Adapter for Boring Bars
100 Bar Max

Tool Holders
C*ASHA (Metric)

C-Adapter (ISO 26623-1)
Quick Change Perpendicular holder for External Square Shank Tools
100 Bar Max PSI

Tool Holders
C*ASHR/L

C-Adapter (ISO 26623-1)
Quick Change Holder for INCH External Square Shank Tools
1450 PSI Max

Tool Holders
C*ASHR/L (Metric)

C-Adapter (ISO 26623-1)
Quick Change Holder for METRIC External Square Shank Tools
100 Bar Max PSI

Tool Holders
C*ASHR/L-45 (Metric)

C-Adapter (ISO 26623-1)
Quick Change Holder for METRIC External Square Shank Tools
For 45° Mounting on Turn Mill Machines
100 Bar Max

Tool Holders
C*EM

C-Adapter (ISO 26623-1)
INCH Weldon Shank End Mill Holder
Per DIN 1835 Form B
Quick Change Holder

Tool Holders
C*EM (Metric)

C-Adapter (ISO 26623-1)
METRIC Weldon Shank End Mill Holder
Per DIN1835 Form B
Quick Change Holder

Tool Holders
C*EM*E (Metric)

C-Adapter (ISO 26623-1)
METRIC Whistle Notch End Mill / Drill Holder
Quick Change Holder
Per DIN6359/DIN1835 Form E

Tool Holders
C*ER

C-Adapter (ISO 26623-1)
ER Collet Chuck DIN 6499
Quick Change Holder

Tool Holders
C*ER*M

C-Adapter (ISO 26623-1)
ER Long Mini Nut Style Collet Chuck
Per DIN 6499
Quick Change Holder

Tool Holders
C*FM

C-Adapter (ISO 26623-1)
Face Mill Holder DIN 6357 (Metric)
Quick Change Holder
Note: Peripheral clamping screws are not supplied with the holder

Tool Holders
C*HYDRO*HD

C-Adapter (ISO 26623-1)
INCH Heavy Duty Hydraulic Milling Chuck
Quick Change Holder
Runout Accuracy <.00012"
High Torque Transmission
Recommended for chatter dampening when machining high temperature alloys such as titanium
Chucking forces will be reduced by 25% when using sleeves
Balanced G2.5@25,000 RPM
*See Notes below

Tool Holders
C*MAXIN

C-Adapter (ISO 26623-1)
INCH MAXIN Power Milling Chuck
Quick Change Holder
Chucking forces will be reduced by 25% when reduction sleeves are used
Optional reduction sleeves should be ordered separately
*Note: Preset screws are compatible with milling chuck sleeves only, they are not compatible for use with the holder alone

Tool Holders
C*MAXIN (Metric)

C-Adapter (ISO 26623-1)
METRIC MAXIN Power Milling Chuck
Quick Change Holder
Chucking forces will be reduced by 25% when reduction sleeves are used
Optional reduction sleeves should be ordered separately
*Note: Preset screws are compatible with milling chuck sleeves only, they are not compatible for use with the holder alone

Tool Holders
C*SEM*C

C-Adapter (ISO 26623-1)
Shell Mill Holder with Internal Coolant Holes ISO 3937
Quick Change Holder

Tool Holders
C*SEM*C

C-Adapter (ISO 26623-1)
Shell Mill Holder with Internal Coolant Holes ISO 3937 (Metric)
Quick Change Holder

Tool Holders
C*SEMC

C-Adapter (ISO 26623-1)
Combi Shell Mill Holder (Metric)
Quick Change Holder

Tool Holders
C*SRKIN

C-Adapter (ISO 26623-1)
INCH Thermal Shrink Chuck
Quick Change Holder
For use with h6 carbide, steel, or HSS shank tooling
For use with Induction style heating units only

Tool Holders
C*SRKIN (Metric)

C-Adapter (ISO 26623-1)
INCH Thermal Shrink Chuck
Quick Change Holder
For use with h6 carbide, steel, or HSS shank tooling
For use with Induction style heating units only

Tool Holders
C*TBK (Metric)

C-Adapter (ISO 26623-1)
Quick Change Block for Parting & Grooving Blades

Tool Holders
C*TBU (Metric)

C-Adapter (ISO 26623-1)
Quick Change Block for Parting & Grooving Blades

Tool Holders
CAT*EM

CAT V-Flange
INCH Weldon Style End Mill Holder DIN 6359/1835 Form B
AD Style Coolant (coolant through the center)

Tool Holders
CAT*EM-M (Metric)

CAT V-Flange
METRIC Weldon Shank End Mill Holder DIN 6359/1835 Form B
AD Style Coolant (coolant through the center)

Tool Holders
CAT*ER

CAT V-Flange
ER Collet Chuck DIN 6499
AD Style Coolant (coolant through the center)
CAT30 / CAT40 balanced G2.5@20,000RPM
CAT50 balanced G2.5@12,000RPM

Tool Holders
CAT*ER*SHORT

CAT V-Flange
ER Short Collet Chuck DIN 6499
AD Style Coolant (coolant through the center)
Balanced G2.5 @ 20,000 RPM

Tool Holders
CAT*FC*EM

CAT Face Contact
INCH Weldon End Mill Holder DIN 1835 Form B
AD Style Coolant (coolant through the center)

Tool Holders
CAT*FC*ER

CAT Face Contact
ER Collet Chuck DIN 6499
AD Style Coolant (coolant through the center)
AD Style Coolant (through the center)
CAT40 balanced G2.5@20,000RPM
CAT50 balanced G2.5@15,000RPM

Tool Holders
CAT*FC*MAXIN

CAT Face Contact
MAXIN Power Milling Chuck
Chucking forces will be reduced by 25% when reduction sleeves are used
Optional reduction sleeves should be ordered separately
*Note: Preset screws are compatible with milling chuck sleeves only, they are not compatible for use with the holder alone

Tool Holders
CAT*FC*SEM*C

CAT Face Contact
Shell Mill Holder with Internal Coolant Holes ISO 3937
Symmetrical Design, Dynamically Balanced for high RPM Machining
AD Style Coolant with Ported Coolant Delivery
Balanced G2.5 @ 20,000 RPM

Tool Holders
CAT*FC*SRKIN

CAT Face Contact
Thermal Shrink Chuck
AD Style Coolant (coolant through the center)
For use with Carbide, HSS, and Steel tools with h6 tolerance
Balanced G2.5@25,000RPM
For use with Inductive Heating devices only

Tool Holders
CAT*FM

CAT V-Flange
Face Mill Adapter
AD Style Coolant Delivery
Note: 4" and 6" Gage Lengths are standard with both the 4 Bolt Circle Pattern and Lock Screw adaptions, 2.875" Gage Length has 4 Bolt Circle adaption only
*Peripheral clamping screws are not supplied with holder

Tool Holders
CAT*HYDRO

CAT V-Flange
Hydraulic Milling Chuck
CAT40 Balanced G2.5@18,000 RPM
CAT50 Balanced G2.5@12,000 RPM
Runout Accuracy <.00012"
Recommended for chatter dampening when machining high temperature alloys such as titanium
Chucking forces will be reduced by 25% when using sleeves
*See Notes below

Tool Holders
CAT*MAXIN

CAT V-Flange
MAXIN Power Milling Chuck
Chucking forces will be reduced by 25% when reduction sleeves are used
Optional reduction sleeves should be ordered separately
*Note: Preset screws are compatible with milling chuck sleeves only, they are not compatible for use with the holder alone

Tool Holders
CAT*SEM

CAT V-Flange
Shell Mill Holder ISO 3937

Tool Holders
CAT*SEM*C

CAT V-Flange
Shell Mill Holder with Internal Coolant Holes ISO 3937
Symmetrical Design, Dynamically Balanced for high RPM Machining
ADB Style Coolant with Ported Coolant Delivery
Balanced G2.5@20,000RPM

Tool Holders
CAT*SRK

CAT V-Flange
Thermal Shrink Chuck
AD Style Coolant (coolant through the center)
Balanced G2.5@25,000RPM

Tool Holders
CAT*SRKIN

CAT V-Flange
Thermal Shrink Chuck
ADB Style Coolant (convertible coolant through the center & flange)
For use with Inductive Heating device ONLY
Balanced G2.5@25,000RPM

Tool Holders
CAT*STUB

CAT V-Flange
Slotting Cutter Stub Arbor
For use with Axial drive cutters

Tool Holders
Coolant Lock Screw Set - Inch

Adjustable protrution nozzle directs coolant to the cutting zone
Improves chip evacuation
Nozzle screw position can be secured by a locking nut
Can be easily adjusted according to countersink depth, insert size, etc
Set includes nozzle screw, locking screw, locking nut, and washers
*Optional Accessory Item
Sold separately

Tool Holders
Coolant Lock Screw Set - Metric

Adjustable protrution nozzle directs coolant to the cutting zone
Improves chip evacuation
Can be easily adjusted according to countersink depth, insert size, etc
Nozzle screw position can be secured by a locking nut
Set includes nozzle screw, locking screw, locking nut, and washers
*Optional Accessory Item
Sold separately

Tool Holders
COOLING TUBE

Coolant Tube
Required for use with all coolant through HSK and C-Adapter Spindles
Optional Accessory Item - Sold separately
Refer to machine manual prior to mounting C# Cooling Tube to confirm clamping drawbar has O-ring inside. Mount cooling tube by using the "Mount" side of the Cooling Tube C# Wrench (Sold separately)
*See additional notes below

Tool Holders
DIN69871*FM (Metric)

DIN69871 Form A/AD Shank
Face Mill Holder DIN 6357 (Metric)
AD Style Coolant except where noted
Note: 60mm Pilot is 4-Bolt pattern adaption only with no lock screw. 40mm Pilot has 4-Bolt pattern and lock screw adaption
*Peripheral clamping screws are not supplied with holder

Tool Holders
DIN69871*HYDRO (Metric)

DIN69871 V-Flange
METRIC Hydraulic Milling Chuck
High runout accuracy of < 0.003 mm
For use in Reaming, Drilling, Finish Milling, and fine, accurate machining applications
DIN69871-40 balanced G2.5@18,000 RPM
DIN69871-50 balanced G2.5@12,000 RPM
Chucking forces will be reduced by 25% when using sleeves
*See Notes below

Tool Holders
DIN69871*HYDRO*HD (Metric)

DIN69871 / SK V-Flange
METRIC Heavy Duty Hydraulic Milling Chuck
High runout accuracy of < 0.003 mm
For use in Reaming, Drilling, Tapping, and difficult high volume machining applications
Balanced G2.5@25,000 RPM
Chucking forces will be reduced by 25% when using sleeves
*See Notes below

Tool Holders
DIN69871*MAXIN

DIN69871 V-Flange
MAXIN Power Milling Chuck
Chucking forces will be reduced by 25% when reduction sleeves are used
Optional reduction sleeves should be ordered separately
*Note: Preset screws are compatible with milling chuck sleeves only, they are not compatible for use with the holder alone

Tool Holders
DIN69871*SEM

DIN69871 Form AD
Shell Mill Holder ISO 3937 (Metric)

Tool Holders
DIN69871*SEM*C

DIN69871 Form ADB
Shell Mill Holder with Internal Coolant Holes ISO 3937 (Metric)
ADB Style Coolant with Ported Coolant Delivery
Symmetrical Design
Dynamically balanced for high RPM machining
DIN69871-40 Balanced G2.5 @ 20,000 RPM
DIN69871-50 Balanced G2.5 @ 15,000 RPM

Tool Holders
DIN69871*SEMC

DIN69871 Form AD Shank
Combi Shell Mill Holder DIN 6358 (Metric)
AD Style Coolant

Tool Holders
DIN69880*HYDRO (Metric)

DIN69880 VDI
METRIC Hydraulic Milling Chuck
High runout accuracy of < 0.003 mm
For use in Reaming, Drilling, Finish Milling, and fine, accurate machining applications
Chucking forces will be reduced by 25% when using sleeves
*See Notes below

Tool Holders
ECCENTRIC SLEEVE

Eccentric Sleeve (Metric)
Used to enlarge or reduce metric nominal drill diameters
Note: The pin, or allen wrench, required to facilitate radial adjustment of the sleeve is not included

Tool Holders
ECCENTRIC SLEEVE

Eccentric Sleeve
Used to enlarge or reduce nominal drill diameters
Note: The pin, or allen wrench, required to facilitate radial adjustment of the sleeve is not included

Tool Holders
ER*EX

ER Series DIN6499 Spring Collet
Single Diameter
.0004" Runout Tolerance
Super Finish Surface with Anti-Corrosion Protection
Recommended for improved runout & clamping torque
For use with solid shank cutting tools

Tool Holders
ER*EX*AA

ER Series DIN6499 Spring Collet
Single Diameter
AA HIgh Precision
.0002" Runout Tolerance
Super Finish Surface with Special Anti-Corrosion protection
Recommended for improved runout & clamping torque
For use with solid shank cutting tools

Tool Holders
ER*EX*AAA

ER Series DIN6499 Spring Collet
Single Diameter (Metric)
AAA Ultra Precision
0.002mm (.00008") Runout Accuracy
Non-Collapsible 12 Slot Design
Super Finish Surface with Special Anti-Corrosion protection
Recommended for improved runout & clamping torque
For use with solid shank cutting tools

Tool Holders
ER*SEAL*AA

ER Series DIN 6499/ISO15488-B Collet
Single Diameter (Metric)
8 Slot Rubber Sealed Design
AA High Precision
.0002" TIR
Collapse Range 0.008" Max
Super Finish Surface with Anti-Corrosion protection
100 Bar Max
For use with coolant through cutting tools

Tool Holders
ER*SEAL*AA

ER Series DIN 6499/ISO15488-B Collet
Single Diameter
8 Slot Rubber Sealed Design
AA High Precision
.0002" TIR
Collapse Range 0.008" Max
Super Finish Surface with Anti-Corrosion protection
1450 PSI Max
For use with coolant through cutting tools

Tool Holders
ER*SEAL*AA JET

DIN 6499/ISO 15488-B Collet
Single Diameter (Metric)
8 Slot Rubber Sealed Design with 4 Cooling Jets directing coolant flow to the cutting edge
AA High Precision
0.005 mm TIR
Collapse Range 0.2 mm Max
Super Finish Surface with Anti-Corrosion protection
100 Bar Max
For use with solid shank cutting tools
Recommended for improved runout & clamping torque

Tool Holders
ER*SEAL*AA JET

DIN 6499/ISO 15488-B Collet
Single Diameter
8 Slot Rubber Sealed Design with 4 Cooling Jets directing coolant flow to the cutting edge
AA High Precision
.0002" TIR
Collapse Range 0.008" Max
Super Finish Surface with Anti-Corrosion protection
1450 PSI Max
For use with solid shank cutting tools
Recommended for improved runout & clamping torque

Tool Holders
ER*SPR

ER Series DIN 6499 /ISO15488-B Spring Collet
Inch/Metric Combination
.0004" TIR
Hard Touch Coated
NOTE: ER11 COLLETS SHOWN WITH .039" (1 mm) CLAMPING RANGE HAVE BEEN PHASED OUT AND REPLACED WITH .020" (0.5 mm) CLAMPING RANGE

Tool Holders
ER*SPR*AA

ER Series DIN 6499 Spring Collet
Inch/Metric Combination
AA High Precision
.0002" TIR
Hard Touch coated

Tool Holders
ER*SRK

ER Series Integral Collet
Thermal Shrink Adaption
1450 Max PSI
For use with Carbide Shank Tooling only
For through coolant, preset screw must be removed
*See Notes below

Tool Holders
ER*SRK

ER Series Integral Collet
Thermal Shrink Adaption (Metric)
100 Bar Max
For use with Carbide Shank tooling ONLY
For through coolant, preset screw must be removed
*See Notes below

Tool Holders
ER*SRK*CX

ER Series Integral Collet with Coolant Jet Channels
Thermal Shrink Adaption (Metric)
Slim Nose Design with Coolant channels along shank bore
100 Bar Max
For use with solid carbide shank (non-coolant through) tooling only
Note: Preset CX Screw enables coolant supply via coolant channels - Do Not Remove
*See Notes Below

Tool Holders
ER*SRK*CX

ER Series Integral Collet with Coolant Jet Channels
Thermal Shrink Adaption
Slim Nose Design with Coolant channels along shank bore
1450 Max PSI
For use with solid carbide shank (non-coolant through) tooling only
Note: Preset CX Screw enables coolant supply via coolant channels - Do Not Remove
*See Notes Below

Tool Holders
ER*SRK*JET2

ER Series Integral Collet with Internal Cooling Jets
Thermal Shrink Adaption
1450 Max PSI
For use with standard carbide shank (non-coolant through) tooling
*Note: When assembled in an ER holder, the actual protruding length of the becomes shorter by 2.0 mm for ER20 and 3.0 mm for ER25 and ER32

Tool Holders
ER*SRK*JET2

ER Series DIN 6499 Integral Collet with Internal Cooling Jets
Thermal Shrink Adaption (Metric)
100 Bar Max
For use with standard carbide shank (non-coolant through) tooling
*Note: When assembled in an ER holder, the actual protruding length of the becomes shorter by 2.0 mm for ER20 and 3.0 mm for ER25 and ER32

Tool Holders
HSKA*EM

HSK DIN69893 Form A
INCH Weldon End Mill Holder DIN6355/DIN1835 Form B

Tool Holders
HSKA*ER

HSK-A (DIN 69893/A)
ER Collet Chuck DIN6499
HSK A40-A63 balanced G2.5@20,000RPM
HSK A100 balanced G6.3@12,000RPM

Tool Holders
HSKA*ER*M

HSK-A (DIN 69893/A)
ER Mini Collet Chuck DIN6499
HSK A50-A63 Balanced G2.5@20,000RPM
HSK A100 balanced G6.3@12,000RPM

Tool Holders
HSKA*ER*SHORT

HSK-A (DIN 69893/A)
ER Short Collet Chuck DIN 6499
Balanced G2.5@20,000RPM

Tool Holders
HSKA*FM

HSK-A (DIN 69893/A)
Face Mill Holder DIN 6353 (Metric)
4 Bolt Adaption Pattern (No Lock Screw on Pilot)
Balanced G2.5@33,000RPM
Note: Peripheral clamping screws are not included with holder

Tool Holders
HSKA*FM

HSK-A (DIN 69893/A)
Face Mill Holder DIN 6353
4 Bolt Adaption Pattern (No Lock Screw on Pilot)
Note: Peripheral clamping screws are not included with holder

Tool Holders
HSKA*HYDRO

HSK-A (DIN 69893/A)
Hydraulic Milling Chuck
HSKA50-A63 balanced G2.5@25,000RPM
HSKA100 balanced G2.5@18,000RPM
Note: Chucking forces will be reduced by 25% when optional reduction sleeves are used
*See additional notes below

Tool Holders
HSKA*HYDRO (Metric)

HSK-A (DIN 69893/A)
Hydraulic Milling Chuck (Metric)
HSKA63 balanced G2.5@24,000RPM
HSKA80 balanced G2.5@16,000RPM
HSKA100 balanced G2.5@15,000RPM
Note: Chucking forces will be reduced by 25% when optional reduction sleeves are used
*See additional notes below

Tool Holders
HSKA*MAXIN

HSK-A (DIN 69893/A)
INCH Power Milling Chuck
Chucking forces will be reduced by 25% when reduction sleeves are used
Optional reduction sleeves should be ordered separately
*Note: Preset screws are compatible with milling chuck sleeves only, they are not compatible for use with the holder alone

Tool Holders
HSKA*MAXIN (Metric)

HSK-A (DIN 69893/A)
METRIC Power Milling Chuck
Chucking forces will be reduced by 25% when reduction sleeves are used
Optional reduction sleeves should be ordered separately
*Note: Preset screws are compatible with milling chuck sleeves only, they are not compatible for use with the holder alone

Tool Holders
HSKA*SEM

HSK-A (DIN 69893/A)
Shell Mill Holder ISO 3937
HSK A50- A63 balanced G2.5@15,000RPM
HSK A100 balanced G6.3@12,000RPM

Tool Holders
HSKA*SEM

HSK-A (DIN 69893/A)
Shell Mill Holder ISO 3937 (Metric)
HSK A50- A63 balanced G2.5@15,000RPM
HSK A100 balanced G6.3@12,000RPM

Tool Holders
HSKA*SEM*C

HSK-A (DIN 69893/A)
Shell Mill Holder with Internal Coolant Holes ISO 3937
Symmetrical Design for high RPM Machining
Heavy Duty Drive Keys for higher torque transfer
4 Coolant Ports spaced 90° apart on face of pilot
Balanced - HSKA63 G2.5@20,000RPM / HSK A100 G2.5@15,000RPM

Tool Holders
HSKA*SEM*C

HSK-A (DIN 69893/A)
Shell Mill Holder with Internal Coolant Holes ISO 3937 (Metric)
Symmetrical Design for high RPM Machining
Heavy Duty Drive Keys for higher torque transfer
4 Coolant Ports spaced 90° apart on face of pilot
Balanced - HSKA63 G2.5@20,000RPM / HSK A100 G2.5@15,000RPM

Tool Holders
HSKA*SEMC

HSK-A (DIN 69893/A)
Combi Shell Mill Holder DIN 6358 (Metric)
AD Style Coolant
Balanced G2.5 @ 15,000 RPM
*Axial Drive Key not included
For Axial Drive use, remove driving ring and use Axial Drive Key with Spacer Rings

Tool Holders
HSKA*SRK

HSK-A (DIN 69893/A)
INCH Thermal Shrink Chuck
For use with Carbide shank tooling ONLY
Balanced G2.5@25,000RPM

Tool Holders
HSKA*SRK (Metric)

HSK-A (DIN 69893/A)
METRIC Thermal Shrink Chuck
Balanced G2.5@25,000RPM
For use with Carbide shank tooling ONLY

Tool Holders
HSKA*SRKIN

HSK-A (DIN 69893/A)
INCH Thermal Shrink Chuck
For use with carbide, HSS, and steel shank tooling
HSKA63 balanced G2.5@25,000RPM
HSKA100 balanced G2.5@20,000 RPM

Tool Holders
HSKA*SRKIN

HSK-A (DIN 69893/A)
Thermal Shrink Chuck (Metric Bore)
For use with carbide, HSS, and steel h6 shank tooling
HSKA63 balanced G2.5@25,000RPM
HSKA100 balanced G2.5@20,000RPM

Tool Holders
HSKE*ER

HSK-E (DIN 69893/E)
ER Collet Chuck DIN 6499
Balanced G2.5@25,000RPM

Tool Holders
HSKE*SEM

HSK-E (DIN 69893/E)
Shell Mill Holder ISO 3937 (Metric)
Balanced G2.5@15,000RPM

Tool Holders
HSKE*SEM

HSK-E (DIN 69893/E)
Shell Mill Holder ISO 3937
Balanced G2.5@15,000RPM

Tool Holders
HSKE*SRK

HSK-E (DIN 69893/E)
INCH Thermal Shrink Chuck
Balanced G2.5@25,000 RPM
*For use with Carbide shank tooling ONLY

Tool Holders
HSKE*SRK (Metric)

HSK-E (DIN 69893/E)
METRIC Thermal Shrink Chuck
Balanced G2.5@25,000 RPM
*For use with Carbide shank tooling ONLY

Tool Holders
HSKFM*SEM

HSK-FM (DIN 69893/F)
Shell Mill Holder ISO 3937
For use on Makino models MAG Series A machines
Balanced G2.5@33,000 RPM
Note: Orientation pins can be removed for use as a standard HSK F spindle adaption

Tool Holders
HSKFM*SEM

HSK-FM (DIN 69893/F)
Shell Mill Holder ISO 3937 (Metric)
For use on Makino models MAG Series A machines
Balanced G2.5@33,000RPM
Note: Orientation pins can be removed for use as a standard HSK F spindle adaption

Tool Holders
HSKFM*SRKIN

HSK-FM (DIN 69893/F)
INCH Thermal Shrink Chuck with removeable Drive Pins for use on Makino models MAG Series A
HSK FM balanced G2.5@33,000RPM
For use with caribide, HSS, & steel tools with h6 shank tolerance
Note: Compatible with inductive heating devices only

Tool Holders
Nut ER MINI/UM

ER MINI/UM Clamping Nut
For use with DIN 6499 Collet chucks
ER MINI Nuts are slotted style nuts
ER16 UM and ER20 UM are Hex style nuts
ER25, ER32, ER40, and ER50 are slotted style nuts
Hard Lube Coating for extended life
*See Notes Below

Tool Holders
Nut ER SHORT

ER SHORT Clamping Nut
For Use with ER*SHORT Collet Chucks Only
Threaded OD for short projection

Tool Holders
Nut ER TOP

ER TOP Clamping Nut
DIN 6499 Collet Chucks
Exclusive Anti-Friction Mechanism
Combination Flush/Power Nut
Hard Touch Protective Coating
Power gripping force with unique compact standard DIN 6499 design
ER16/ER20 Hex Style
ER25/ER32/ER40 Slotted Style

Tool Holders
Pre-Set Screws

Preset Screws
*Note: Images shown are a generic representation of the product and may not be an actual representation of each specific product within the series

Tool Holders
R8*ER

R8 Bridgeport Shank
ER Collet Chuck DIN 6499

Tool Holders
Retention Knob Sockets

For use with installation of retention knobs and pull studs
Aids in prevention of rounded off corners
Extends life span of the retention knob
Manufactured using AISI 4150 Steel
Made in the USA
Optional Accessory Item

Tool Holders
SC*HYDRO

Sealed Reduction Sleeve
For use in hydraulic milling chucks
Note: Sleeves are compatible with all cylindrical shanks and Weldon shanks .250"-.750" diameter (Sleeves are not recommended for use with Weldon shanks over .750" diameter)

Tool Holders
SC*HYDRO

Sealed Reduction Sleeve (Metric)
For use in hydraulic milling chucks
NOTE: Product Series is being obsoleted and replaced with SC*HYDRO*HD
Note: Sleeves are compatible with all cylindrical shanks and flatted shanks 6-20 mm diameter (Sleeves are not recommended for use with flatted shanks over 20 mm diameter)

Tool Holders
SC*HYDRO*HP

Sealed Reduction Sleeve (Metric)
For use in hydraulic milling chucks
Runout Accuracy <0.003 mm
Max Coolant Pressure 85 Bar
Note: Sleeves are compatible with all cylindrical shanks and flatted shanks 6-20 mm diameter (Sleeves are not recommended for use with flatted shanks over 20 mm diameter)

Tool Holders
SC*SEAL

Straight Sealed Sleeve/Collet (Metric)
For use with MAXIN Power Milling Chucks
Preset Screw available for tool positioning (Sold Separately)
Rated to 100 Bar
*Chucking forces will be reduced by 25% when the optional reduction sleeves are used

Tool Holders
SC*SEAL

Straight Sealed Sleeve/Collet
For use with MAXIN Power Milling Chucks
Preset Screw available for tool positioning (Sold Separately)
Rated to 1450 PSi
*Chucking forces will be reduced by 25% when the optional reduction sleeves are used

Tool Holders
SC*SPR

Straight Sleeve/Collet (Metric)
For use with MAXIN Power Milling Chucks
Preset Screw available for tool positioning (Sold Separately)
*Chucking forces will be reduced by 25% when the optional reduction sleeves are used

Tool Holders
SC*SPR

Straight Sleeve/Collet
For use with MAXIN Power Milling chucks
Preset Screw available for tool positioning (Sold Separately)
Note: Chucking forces will be reduced by 25% when the optional reduction sleeves are used

Tool Holders
SC*SPR INCH/METRIC

Straight Sleeve/Collet (Inch OD to Metric ID)
For use with Power Milling Chucks
Note: Chucking forces will be reduced by 25% when the optional reduction sleeves are used

Tool Holders
SEM Locking Screw

Replacement Locking Screw for Radial Drive Shell Mill Holder
*Note: Images shown are a generic representation of the product and may not be an actual representation of each specific product within the series

Tool Holders
SEMC Drive Ring

Adapter Driving Ring for use with 3/4" Arbor
Required for use with Form Master Shear Button/Disc Slotting Cutters

Tool Holders
SEMC Drive Ring (Metric)

DIN6366/1 Drive Ring for Metric COMBI Holder

Tool Holders
SET ER*SEAL*AA

ER Series DIN 6499/ISO15488-B Sealed Collet
Single Diameter Collet Set (Metric)
8 Slot Design
.0002" TIR
Super Finish Surface with Anti-Corrosion protection
Increased rigidity, higher accuracy, and better clamping force
For up to 1450 PSI

Tool Holders
SET ER*SEAL*AA

ER Series DIN 6499/ISO15488-B Sealed Collet
Single Diameter Collet Set
8 Slot Design
.0002" TIR
Super Finish Surface with Anti-Corrosion protection
Increased rigidity, higher accuracy, and better clamping force
For up to 1450 PSI

Tool Holders
SET ER*SEAL*AA JET

DIN 6499/ISO 15488-B
Single Diameter Sealed JET Collet Set (Metric)
8 Slot Rubber Sealed Design with 4 Cooling Jets directing coolant flow to the cutting edge
AA High Precision
0.005 mm TIR
Collapse Range 0.2 mm Max
Super Finish Surface Anti-Corrosion protection
100 Bar Max
For use with solid shank cutting tools

Tool Holders
SET ER*SEAL*AA JET

DIN 6499/ISO15488-B
Single Diameter Sealed JET Collet Set
8 Slot Rubber Sealed Design with 4 Cooling Jets directing coolant flow to the cutting edge
AA High Precision
.0002" TIR
Collapse Range 0.008" Max
Super Finish Surface with Anti-Corrosion protection
1450 PSI Max
For use with solid shank cutting tools
Recommended for improved runout & clamping torque

Tool Holders
SET ER*SPR

SET ER DIN 6499 Collet Set
Inch/Metric Combination
Runout tolerance of .0004"
Hard Touch coated for improved accuracy and wear resistance

Tool Holders
SET ER*SPR*AA

SET ER-AA DIN 6499 Collets
Inch/Metric Combination
Ultra Precision .0002" run out tolerance
Hard Touch coated for improved accuracy & wear resistance

Tool Holders
SET ER*SPR*EM

ER DIN 6499 Collet Set
End Mill Shank Sizes (Metric)
Runout tolerance of .0004"
Hard Touch coated for improved accuracy and wear resistance

Tool Holders
SET ER*SPR*EM AA

ER DIN 6499 Collet Set
End Mill Shank Sizes (Metric)
Runout tolerance of .0002"
Hard Touch coated for improved accuracy and wear resistance

Tool Holders
SET ER*SPR*EX AA

ER DIN 6499 Collet Set
Single Diameter
Runout tolerance of .0002"
Hard Touch coated for improved accuracy and wear resistance

Tool Holders
SET SC*SEAL

Straight Sealed Sleeve/Collet Set (Metric)
For use with MAXIN Power Milling Chucks
Preset Screw available for tool positioning (Sold Separately)
Rated to 100 Bar
*Chucking forces will be reduced by 25% when the optional reduction sleeves are used

Tool Holders
SET SC*SEAL

Straight Sealed Sleeve/Collet Set
For use with MAXIN Power Milling Chucks
Preset Screw available for tool positioning (Sold Separately)
Rated to 1450 PSi
*Chucking forces will be reduced by 25% when the optional reduction sleeves are used

Tool Holders
SET SC*SPR

Straight Sleeve/Collets Set (Metric)
For use with MAXIN Power Milling Chucks
Preset Screw available for tool positioning (Sold Separately)
*Chucking forces will be reduced by 25% when the optional reduction sleeves are used

Tool Holders
SET SC*SPR

Straight Sleeve/Collet Set
For use with MAXIN Power Milling Chucks
Preset Screw available for tool positioning (Sold Separately)
*Chucking forces will be reduced by 25% when the optional reduction sleeves are used

Tool Holders
SET*ER*SPR*EMI

ER DIN 6499 Collet Set
End Mill Shank Size Diameters
Runout tolerance of .0004"
Hard Touch coated for improved accuracy and wear resistance

Tool Holders
ST*ER

Cylindrical Shank
ER Collet Chuck DIN 6499
Central Coolant Hole

Tool Holders
ST*ER*M

Cylindrical Shank
ER Collet Chuck DIN 6499
Central Coolant Hole

Tool Holders
ST*ER*MF

Cylindrical Flatted Shank
ER Collet Chuck DIN 6499 with Mini Nut
For Use on Swiss Type CNC Lathe
Central Coolant Hole

Tool Holders
ST*ER*MFD

Cylindrical Flatted Shank
ER Collet Chuck DIN 6499 Double Ended with Mini Nut
Central Coolant Hole

Tool Holders
ST*ER*S

Cylindrical Shank
ER Collet Chuck DIN 6499 with 1/4" NPT inlet
Central coolant hole

Tool Holders
ST*SRK

INCH Cylindrical Shank
Thermal Shrink Holder
For use with carbide shank tooling only
Central Coolant Hole

Tool Holders
ST*SRK (Metric)

METRIC Cylindrical Shank
Thermal Shrink Holder
For use with carbide shank tooling only
Central Coolant Hole

Tool Holders
Wrench COMBI Spanner

DIN6368 Wrench
For use with Metric Face and COMBI Shell Mill Holder Lock Screw
Optional Accessory Item

Tool Holders
Wrench Cooling Tube C-Adapter

Cooling Tube Wrench for C-Adapter Series Holders
T-Handle Wrench used for Coolant Tube installation and removal in C-Adapter style holders
Optional Accessory Item

Tool Holders
Wrench Cooling Tube HSK

Cooling Tube Wrench for HSK Holders
T-Handle Wrench used for Coolant Tube installation and removal in HSK style holders
Optional Accessory Item

Tool Holders
Wrench ER

Wrench for ER DIN 6499 Collet Nut
Optional Accessory Item

Tool Holders
Wrench MAXIN

Wrench for MAXIN Milling Chuck
Optional Accessory Item

Tool Holders
Wrench TOP ON

Metric Thin Head Check Nut Wrench
Single End 15 Degree Angled Slotted Opening
For Use with Top On Tooling
Drop Forged from Steel Bar
Industrial Black Coating
Optional Accessory Item

Top-On
BT*ODP

BT MAS-403
TopOn Threaded Depo Adaption
BT40 balanced G2.5@20,000RPM
BT50 balanced G6.3@12,000RPM
ADB Style Convertible Coolant (coolant through the center or flange)
Note: Remove plug screw from flange to activate coolant through the flange delivery option

Top-On
BT*ODP (Metric)

BT MAS-403
TopOn Threaded Depo Adaption
BT40 balanced G2.5@20,000RPM
BT50 balanced G6.3@12,000RPM
ADB Style Convertible Coolant (coolant through the center or flange)
Note: Remove plug screw from flange to activate coolant through the flange delivery option

Top-On
C*ODP

C-Adapter (ISO 26623-1)
TopOn Threaded Depo Adaption
Quick Change Holder with Data Chip Slot
Balanced G6.3@15,000RPM
*See Notes below

Top-On
C*ODP (Metric)

C-Adapter (ISO 26623-1)
TopOn Threaded Depo Adaption
Quick Change Holder with Data Chip Slot
Balanced G6.3@15,000RPM
*See Notes below

Top-On
CAT40*ODP

CAT40 V-Flange
TopOn Threaded Depo Adaption
Balanced G2.5@20,000 RPM
ADB Convertible Coolant (Through the center or flange)
Note: Remove screw from flange to activate coolant through the flange delivery option

Top-On
CAT50*ODP

CAT50 V-Flange
TopOn Threaded Depo Adaption
Balanced G6.3@12,000 RPM
ADB Convertible Coolant (Through the center or flange)
Note: Remove plug screw from flange to activate teh coolant through the flange delivery option

Top-On
CDPER*M

TopOn Threaded Adaption Adapter
ER Collet Chuck DIN 6499
Interchangeable with inch and metric shanks
Coolant through center

Top-On
CDPM*SRK

TopOn Threaded Adaption Adapter
INCH Thermal Shrink Fit Chuck
Coolant through center feedhole
Interchangeable with inch and metric shanks
For use with carbide shank tooling only

Top-On
CDPM*SRK (Metric)

TopOn Threaded Adaption Adapter
METRIC Thermal Shrink Fit Chuck
Coolant through center feedhole
Interchangeable with inch and metric shanks
For use with carbide shank tooling only

Top-On
DIN69871*ODP (Metric)

DIN 69871 V-Flange
TopOn Threaded Depo Adaption
CAT40 Balanced G2.5@20,000 RPM
CAT50 Balanced G6.3@12,000 RPM
ADB Convertible Coolant (Through the center or flange)
Note: Remove screws in flange to activate flange coolant option

Top-On
ER*ODP

ER Style Integral Collet
TopOn Threaded Adaption Adapter
JET2 Style Ported Coolant
Max 1450 psi
For use with standard straight shank tooling

Top-On
HSKA*ODP

HSK-A (DIN69893/A)
TopOn Threaded Depo Adaption
HSKA63 balanced G2.5@20,000 RPM
HSKA100 Balanced G6.3@12,000 RPM
*See Notes below

Top-On
HSKA*ODP (Metric)

HSK-A (DIN69893/A)
TopOn Threaded Depo Adaption
HSKA63 balanced G2.5@20,000 RPM
HSKA100 Balanced G6.3@12,000 RPM
*See Notes below

Top-On
HSKE*ODP

HSK-E (DIN 69893/E)
TopOn Threaded Depo Adaption
Balanced G2.5@20,000 RPM
*See Notes below

Top-On
HSKE*ODP (Metric)

HSK-E (DIN 69893/E)
TopOn Threaded Depo Adaption
Balanced G2.5@20,000 RPM
*See Notes below

Top-On
MOD*MOD*SA

TopOn Threaded Adaption Extension
Central Coolant Hole
*See Notes below

Top-On
MOD*MOD*SK

TopOn Threaded Adaption Reducer
Central Coolant Hole
*See Notes below

Top-On
MOD*SEM*C

TopOn Thread Adaption Adapter
Shell Mill Holder ISO 3937 (Metric)
Ported Coolant Delivery
Note: When mounting TopOn threaded adaptions to their holders, the mating surfaces & threaded areas must be thoroughly cleaned. Apply appropriate tightening torque to eliminate gap between mating surfaces.

Top-On
MOD*SEM*C

TopOn Thread Adaption Adapter
Shell Mill Holder ISO 3937
Ported Coolant Delivery
Note: When mounting TopOn threaded adaptions to their holders, the mating surfaces & threaded areas must be thoroughly cleaned. Apply appropriate tightening torque to eliminate gap between mating surfaces.

Top-On
MOD*T*SK

TopOn to Chip Surfer Connection
Coolant through the center
Do not apply lubricant to the threaded connection
*See Notes below

Top-On
S*MOD*CA

Inch Cylindrical Carbide Shank
TopOn Depo Thread Adaption
Central Coolant Hole
Interchangeable with Inch and Metric milling heads
Enables machining with larger overhang
Useful in deep cavity machining applications
*See Notes below

Top-On
S*MOD*CA (Metric)

Metric Cylindrical Carbide Shank
TopOn Threaded Depo Adaption
Central Coolant Hole
Interchangeable with Inch and Metric milling heads
Enables machining with larger overhang
Useful in deep cavity machining applications
*See Notes below

Top-On
S*MOD*CK

Inch Conical Taper Carbide Shank
TopOn Threaded Depo Adaption
Central Coolant Hole
Interchangeable with Inch and Metric milling heads
Enables machining with larger overhang
Useful in deep cavity machining applications
*See Notes below

Top-On
S*MOD*HA (Metric)

Metric Straight Cylindrical Heavy Metal Shank
TopOn Threaded Depo Adaption
Central Coolant Hole
Interchangeable with Inch and Metric milling heads
Enables machining with larger overhang
Useful in deep cavity machining applications
*See Notes below

Top-On
S*MOD*HK (Metric)

Metric Straight Conical Heavy Metal Shank
TopOn Threaded Depo Adaption
Central Coolant Hole
Interchangeable with Inch and Metric milling heads
Enables machining with larger overhang
Useful in deep cavity machining applications
*See Notes below

Top-On
S*MOD*SA

Inch Cylindrical Steel Shank
TopOn Threaded Depo Adaption
Central Coolant Hole
Interchangeable with Inch and Metric milling heads
Enables machining with larger overhang
Useful in deep cavity machining applications
*See Notes below

Top-On
S*MOD*SA (Metric)

Metric Cylindrical Steel Shank
TopOn Threaded Depo Adaption
Central Coolant Hole
Interchangeable with Inch and Metric milling heads
Enables machining with larger overhang
Useful in deep cavity machining applications
*See Notes below

Top-On
S*MOD*SK

Inch Conical Taper Steel Shank
TopOn Threaded Depo Adaption
Central coolant feedhole
Interchangeable with inch and metric milling heads
Enables machining with larger overhang
Useful in deep cavity machining applications
*See Notes below

Top-On
S*MOD*SK (Metric)

Metric Conical Taper Steel Shank
TopOn Threaded Depo Adaption
Central Coolant Hole
Interchangeable with Inch and Metric milling heads
Enables machining with larger overhang
Useful in deep cavity machining applications
*See Notes below

Top-On
S*MOD*VA (Metric)

Metric Straight Cylindrical Anti Vibe Shank
TopOn Threaded Depo Adaption
Central Coolant Hole
Interchangeable with Inch and Metric milling heads
Enables machining with larger overhang
Useful in deep cavity machining applications
h6 Shank Tolerance
*See Notes below

Top-On
W*MOD*SA

Cylindrical Steel Flatted Shank
Depo Thread Adaption
Central Coolant Hole
Interchangeable with Inch and Metric milling heads
Enables machining with larger overhang
Useful in deep cavity machining applications
*See Notes below

Top-On
W*MOD*SK

Milling

Holemaking

ISO Turning
Grade &
Chipbreaker

Turning
Grades

Turning
Chipbreakers

Machining
App

RapidThread
Advisor

Product Lines

Industries

QwikMod

Tooling Promo

Big Cutter One - Next Stop

Big Cutter Two - Next Stop

In-Person
Seminars

Mobile
Seminars

Tech
Support

Customer
Service

Filter Your Results

Product Categories

Product Categories

	Show Name	Dates	Location	Website
1	HOUSTEX 2023 - See us at the PTS Booth 2503	February 21-23, 2023	Houston, TX	Show Website
1	ISA23 (Industrial Supply Association)	April 17-19, 2023	Phoenix, AZ	Show Website
2	PMTS 2023 (Precision Machining Technology Show)	April 18-20, 2023	Cleveland, OH	Show Website
3	SOUTHTEC 2023	Oct 24-26, 2023	Greenville, SC	Show Website

Milling

Holemaking

ISO TurningGrade &Chipbreaker

TurningGrades

TurningChipbreakers

MachiningApp

RapidThreadAdvisor

Catalogs

Ingersoll TV

Product Lines

Industries

QwikMod

Tooling Promo

Our Most Recent Qwik-Cuts

Big Cutter One - Next Stop

Big Cutter Two - Next Stop

In-PersonSeminars

MobileSeminars

Our Upcoming Trade Shows

Address:

Phone or E-Mail:

TechSupport

CustomerService

Filter Your Results

Product Categories

Product Categories

ISO Turning
Grade &
Chipbreaker

Turning
Grades

Turning
Chipbreakers

Machining
App

RapidThread
Advisor

In-Person
Seminars

Mobile
Seminars

Tech
Support

Customer
Service