Indexable Face Mills

Aluminator
5H6G - 90° Rough & Finish Face Mill

Ø2.000-6.000"
11 mm Insert with 4 indexes
.41" Depth of Cut
15-32 Ra surface finishes when engaging wiper (WEP)
Insert corners: .008", .020", .031", .062", .093", .125" R

Aluminator
5H6G - 90° Rough & Finish Face Mill (Metric)

Ø50.00 - 100.00 mm
11 mm Insert with 4 indexes
8.4 mm Depth of Cut
15-32 Ra surface finishes when engaging wiper (WEP)
Insert corners: .008", .020", .031", .062", .093", .125" R

BlackMax
9N6A - 45° Face Mill

Ø2.00- 6.00"
Insert with 4 indexes
.31" Max depth of cut
Power shear geometry ideally suited for hard materials, weld & interruptions

CeraSFeed
DG1H*R01, DG2H*R01 - Hi-Feed Face Mill

Ø2.000-3.000"
12 mm IC insert with 6 indexes
.098” Max. depth of cut
Strong secure wedge clamp system
Excellent hi-feed performance & economy!

CeraSFeed
TG1Q*R01, TG2Q*R01 - Ceramic Hi-Feed Face Mill

Ø2.000"
9 mm IC Insert with 4 indexes
.060” Max. depth of cut
Strong secure dimple clamp system
Excellent Hi-Feed performance & economy!

CougarMill
5C2M - 60° Heavy Duty Face Mill

Ø4.00-14.00" (RH rotation)
.51" Depth of cut
20 mm Insert with 4 indexes
Finishes as good as 63 Ra
Wedge-held inserts with pocket protection
Power shear geometry ideally suited for hard materials, weld & interruptions

CougarMill
5C2M_L - 60° Heavy Duty Face Mill

Ø8.00-14.00" (LH rotation)
.51" Depth of cut
20 mm Insert with 4 indexes
Finishes as good as 63 Ra
Wedge-held inserts with pocket protection
Power Shear geometry ideally suited for hard materials, weld & interruptions

Cougar-Mill-HSHR
5C4M_L - 60° Heavy Duty HSHR Face Mill

Ø10.00-14.00" (LH rotation)
.484" Depth of cut
20 mm Insert with 4 indexes
Finishes as good as 63 Ra
Wedge-held inserts with pocket protection
Power shear geometry ideally suited for hard materials, weld & interruptions

Cougar-Mill-HSHR
5C4M_R - 60° Heavy Duty HSHR Face Mill

Ø4.00-14.00" (RH rotation)
.484" Depth of cut
20 mm Insert with 4 indexes
Finishes as good as 63 Ra
Wedge-held inserts with pocket protection
Power shear geometry ideally suited for hard materials, weld & interruptions

DiFeedWinV
TG1V - Hi-Feed Face Mill

Ø2.000-2.500”
06 mm IC Insert with 4 indexes
1.0 mm (.040") Max. depth of cut
Double-Sided 4-corner Insert
Higher Ramp Down Angle with Secure 'V' Clamping for Improved Productivity

DiPos-Deka
4W2A - 70° Cartridge Face Mill

Ø8.00-12.00"
.23" Depth of cut
Finishes as good as 20 Ra when using wiper in one pocket
8 mm Insert with 10 indexes
Cartridge pocket protection (sold separatly)
Great price-per-edge economy!

DiPos-Deka
DM2Q - 70° Heavy Duty Face Mill

Ø6.00-12.00"
.50" Depth of cut
17 mm Insert with 10 indexes
Pocket protection with screw-held seat
32-63 Ra surface finishes when engaging the wiper (WEP)
Great Price-per-Edge economy!

DiPos-Deka
DM5E / DM6E - 66° Lead Angle Face Mill

Ø32.00 - 80.00mm
3.8mm Depth of cut
5 mm Insert with 10 indexes
32-63 Ra surface finishes when engaging the wiper (WEP)
Insert corners: 0.50mm

DiPos-Deka
DM5G, DM6G - 70° Face Mill

Ø1.50-8.00"
.23" Depth of cut
8 mm Insert with 10 indexes
Finishes as good as 20 Ra when using wiper in one pocket
Carbide & SiN options
Great price-per-edge economy!

DiPos-Deka
DM5G, DM6G - 70° Face Mill (Metric)

Ø40.00 - 160.00mm
6.00mm Depth of cut
8 mm Insert with 10 indexes
Finishes as good as 20 Ra when using wiper in one pocket
Carbide & SiN options
Great price-per-edge economy!

DiPos-Deka
DM5Q, DM6Q - 70° Heavy Duty Face Mill

Ø3.00-12.00"
.50" Depth of cut
17 mm Insert with 10 indexes
32-63 Ra surface finishes when engaging the wiper (WEP)
Great price-per-edge economy!

DiPosDuo
TJ1D - 90° Backdraft & Hi-Feed Face Mill

Ø1.500-3.000"
6 mm Insert with 4 indexes
.24" Depth of Cut
Insert corners: .015" .031" .039" .047" .059" .062".079" R & Hi-Feed
32-63 Ra finish w/ integrated wiper (WEP)
63-125 Ra finish w/o wiper
Backdraft insert option to reduce vibration for long reach applications

DiPosDuo
TJ1D - 90° B-Draft & Hi-Feed Face Mill

Ø32-63 mm
6 mm Insert with 4 indexes
6 mm Depth of Cut
Insert corners: 0.4, 0.8, 1.0, 1.2, 1.5, 1.6, 2.0mm R & Hi-Feed
32-63 Ra finish w/ integrated wiper (WEP).
63-125 Ra finish w/o wiper
Backdraft insert option to reduce vibration for long reach applications

DiPosDuo
TJ5F - 90° & Hi-Feed Face Mill

Ø40-80 mm
9 mm Insert with 4 indexes
8 mm 90° Depth of Cut
1.5 mm Hi-Feed Depth of Cut
Insert corners: 0.4, 0.8, 1.6mm R & Hi-Feed
32-63 Ra finish w/ integrated wiper (WEP)
63-125 Ra finish w/o wiper

DiPosDuo
TJ5G TJ6G - 90° & Hi-Feed Face Mill

Ø40-100 mm
11 mm Insert with 4 indexes
10.5 mm 90° Depth of Cut
2.0 mm Hi-Feed Depth of Cut
Insert corners: 0.8 mm, 1.6 mm 2.4 mm R & Hi-Feed
32-63 Ra finish w/ integrated wiper (WEP)
63-125 Ra finish w/o wiper

DiPosDuo
TJ5G TJ6G - 90° & Hi-Feed Face Mill

Ø2.000-4.000"
11 mm Insert with 4 indexes
.41" 90° Depth of Cut
.078" Hi-Feed Depth of Cut
Insert corners: .031" .062" .094" R & Hi-Feed
32-63 Ra finish w/ integrated wiper (WEP)
63-125 Ra finish w/o wiper

DiPosDuo
TJ5J TJ6J - 90° & Hi-Feed Face Mill

Ø2.000-4.000"
14 mm Insert with 4 indexes
.54" 90° Depth of Cut
.118" Hi-Feed Depth of Cut
Insert corners: .031" R & Hi-Feed
32-63 Ra finish w/ integrated wiper (WEP)
63-125 Ra finish w/o integrated wiper

DiPosDuo
TJ5J TJ6J - 90° & Hi-Feed Face Mill

Ø50-125 mm
14 mm Insert with 4 indexes
13.8 mm 90° Depth of Cut
3.0 mm Hi-Feed Depth of Cut
Insert corners: 0.8 mm R & Hi-Feed
32-63 Ra finish w/ integrated wiper (WEP)
63-125 Ra finish w/o integrated wiper

DiPosDuo
TJ6F - 90° & Hi-Feed Face Mill

Ø1.500-4.000"
9 mm Insert with 4 indexes
.32" 90° Depth of Cut
.059" Hi-Feed Depth of Cut
Insert corners: .015" .031" 062" R & Hi-Feed
32-63 Ra finish w/ integrated wiper (WEP)
63-125 Ra finish w/o integrated wiper

DiPosFeed
TG1F - Hi-Feed Face Mill

Ø2.000”
1 mm (.039") Max. depth of cut
6 mm IC insert with 4 indexes
Three different insert edge preparations provide application flexibility
Excellent hi-feed performance & economy!

DiPosFeed
TG1F - Hi-Feed Face Mill (Metric)

Ø40-63 mm
6 mm IC insert with 4 indexes
1 mm (.039") Max. depth of cut
Three different insert edge preparations provide application flexibility
Excellent hi-feed performance & economy!

DiPosFeed
TG1G, TG2G - Hi-Feed Face Mill

Ø2.000-3.000”
9 mm IC Insert with 4 indexes
1.5 mm (.059") Max. depth of cut
Three different insert edge preparations provide application flexibility
Excellent hi-feed performance & economy!

DiPosFeed
TG1G,TG2G,TG3G,TG4G - Hi-Feed Face Mill

Ø40-80 mm
9 mm IC Insert with 4 indexes
1.5 mm (.059") Max. depth of cut
Three different insert edge preparations provide application flexibility
Excellent hi-feed performance & economy!

DiPosFeed
TG1J, TG2J - Face Mill

Ø50-100 mm
11 mm IC Insert with 4 indexes
2.0 mm (.078") Max. depth of cut
Three different insert edge preparations provide application flexibility
Excellent Hi-Feed performance & economy!

DiPosFeed
TG1J, TG2J - Hi-Feed Face Mill

Ø2.000-4.000”
11 mm IC Insert with 4 indexes
2.0 mm (.078") Max. depth of cut
Three different insert edge preparations provide application flexibility
Excellent hi-feed performance & economy!

DiPosFinishT
TA3Q - Fixed Pocket Finish Face Mill

Ø2.000-6.000"
12 mm Insert with up to 4 indexes
.020" Max. Depth of Cut (.012" Min. depth of cut)
Non-adjusting design reduces set up time
Long crowned wiper produces 3-15 Ra surface finish
Stepped insert orientation alleviates axial & radial forces
Can mill up to 90° shoulder
Carbide, CBN & PCD insert offering for a wide variety of materials

DiPos-Hexa
HN5D, HN6D - 45° Face Mill

Ø40-160 mm
6 mm Insert with 12 indexes
3 mm Depth of cut
32-63 Ra surface finishes
Great price-per-edge economy!

DiPos-Hexa
HN5D, HN6D - 45° Face Mill

Ø1.50-6.00"
.11" Depth of cut
6 mm Insert with 12 indexes
32-63 Ra surface finishes
Great price-per-edge economy!

DiPos-Hexa
HN5G, HN6G - 45° Face Mill

Ø63-250 mm
10 mm Insert with 12 indexes
5 mm Depth of cut
32-63 Ra surface finishes
Great price-per-edge economy!

DiPos-Hexa
HN5G, HN6G - 45° Face Mill

Ø2.50-10.00"
.20" Depth of cut
10mm Insert with 12 indexes
32-63 Ra surface finishes
Great price-per-edge economy!

DiPosPenta
DM6C - 65° Face Mill

Ø1.500-3.000"
5 mm Insert with 10 indexes
.13" Depth of cut
Same insert fits Hi-Feed & 65° Mills
Positive rake and reinforced edge offer low cutting forces and smooth machining
Great price-per-edge economy!

DiPosPenta
DM6P - 65° Face Mill

Ø2.00-4.00"
.25" Depth of cut
10mm Insert with 10 indexes
Same insert fits Hi-Feed & 65° MIlls
63-125 Ra surface finishes
Positive rake and reinforced edge offer low cutting forces and smooth machining
Great price-per-edge economy!

DiPosPenta
DP6C - Hi-Feed Face Mill

Ø1.500-2.500"
5 mm Insert with 10 indexes
.059" Depth of cut
Same insert fits Hi-Feed & 65° Mills
Positive rake and reinforced edge offer low cutting forces and smooth machining in deep cavities
High ramping capability
Great price-per-edge economy!

DiPosPenta
DP6P - Hi-Feed Face Mill

Ø2.000-3.000"
10 mm Insert with 10 indexes
.11" Depth of cut
Same insert fits Hi-Feed & 65° Mills
Positive rake and reinforced edge offer low cutting forces and smooth machining in deep cavities
High ramping capability
Great price-per-edge economy!

DiPosQuad
DJ5E - 90° Rough & Finish Face Mill

Ø32-50 mm
7 mm Insert with 8 indexes
5 mm Depth of Cut
15-32 Ra surface finishes when engaging the wiper (WEP)
Insert corners: .031" R

DiPosQuad
DJ5E, DJ6E - 90° Rough & Finish Face Mill

Ø1.500-3.000"
7 mm Insert with 8 indexes
.19" Depth of Cut
15-32 Ra surface finishes when engaging the wiper (WEP)
Insert corners: .031" R

DiPosQuad
DJ5G, DJ6G - 90° Face Mill

Ø2.000-6.000"
12 mm Insert with 8 indexes
.33" Depth of Cut
32-63 Ra surface finishes when engaging the wiper (WEP)
Insert corners: .031" R

DiPosQuad
DJ5R, DJ6R - 90° Rough & Finish Face Mill

Ø40-125 mm
10 mm Insert with 8 indexes
7 mm Depth of Cut
0.4-0.8 Ra surface finishes when engaging the wiper (WEP)
Insert corners: 0.8 R

DiPosQuad
DJ5R, DJ6R - 90° Rough & Finish Face Mill

Ø1.500-5.000"
10 mm Insert with 8 indexes
.27" Depth of Cut
15-32 Ra surface finishes when engaging the wiper (WEP)
Insert corners: .031" R

DiPosQuadF
DG6G - Hi-Feed Face Mill

Ø50-100 mm
11 mm Insert with 8 indexes
1.8 mm Axial depth of cut for X/Y axis milling
7.5 mm Radial width of cut for plunge milling
Ideal for steel and iron
Enjoys heavy chiploads!

DiPosQuadF
DG6G - Hi-Feed Face Mill

Ø2.000-4.000"
11 mm Insert with 8 indexes
.07" Axial depth of cut for X/Y axis milling
.30" Radial width of cut for plunge milling
Ideal for steel and iron
Enjoys heavy chiploads!

DiPosQuadF
DG6K - Hi-Feed Face Mill

Ø63-125 mm
14 mm Insert with 8 indexes
2.5 mm Axial depth of cut for X/Y axis milling
9.5 mm Radial width of cut for plunge milling
Ideal for steel and iron
Enjoys heavy chiploads!

DiPosQuadF
DG6K - Hi-Feed Face Mill

Ø2.500-6.000"
14 mm Insert with 8 indexes
.10" Axial depth of cut for X/Y axis milling
.37" Radial width of cut for plunge milling
Ideal for steel and iron
Enjoys heavy chiploads!

DiPosQuadF
DN5G DN6G - 45° Face Mill

Ø1.500-6.000"
11 mm Insert with 8 indexes
.165" Depth of cut
20-40 Ra surface finishes
Ideal for steel and iron
Enjoys heavy chiploads!

DiPosQuadF
DN5G DN6G - 45° Face Mill

Ø40-160 mm
11 mm Insert with 8 indexes
4.2 mm Depth of cut
0.5-1.0 Ra surface finishes
Ideal for steel and iron
Enjoys heavy chiploads!

DiPosQuadF
DN5K DN6K - 45° Face Mill

Ø50-200 mm
14 mm Insert with 8 indexes
6 mm Depth of cut
0.5-1.0 Ra surface finishes
Ideal for steel and iron
Enjoys heavy chiploads!

DiPosQuadF
DN5K DN6K - 45° Face Mill

Ø2.000-8.000"
14 mm Insert with 8 indexes
.235" Depth of cut
20-40 Ra surface finishes
Ideal for steel and iron
Enjoys heavy chiploads!

DiPos-Tetra
TJ1C - 90° & Hi-Feed Face Mill

Ø1.500-2.000"
5 mm Insert with 2 indexes
.18" 90° Depth of Cut
.02" Hi-Feed Depth of Cut
Insert corners: .008" .015" .031" R & Hi-Feed
32-63 Ra surface finishes when engaging the wiper (WEP)
Double dovetail pocket fosters easy insert indexing & eliminates insert screw stress

DiPos-Tetra
TJ5N, TJ6N - 90° Face Mill

Ø2.000-8.000"
16 mm Insert with 4 Indexes
.59" Depth of cut
32-63 Ra surface finishes when engaging the wiper (WEP)
Insert corners: .015", .031", .062", .094" R

DiPos-Tetra
TJ5N, TJ6N - 90° Face Mill (Metric)

Ø50.00 - 125.00 mm
16 mm Insert with 4 Indexes
15.00 mm Depth of cut
32-63 Ra surface finishes when engaging the wiper (WEP)
Insert corners: .015", .031", .062", .094" R

DiPos-Tetra
TJ5Q / TJ6Q - 90° Face Mill (Metric)

Ø40.00 - 125.00 mm
12 mm Insert with 4 indexes
11.10 mm Depth of cut
32-63 Ra surface finishes when engaging the wiper (WEP)
Insert corners: .015", .031", .062" R

DiPos-Tetra
TJ5Q, TJ6Q - 90° Face Mill

Ø2.000-4.000"
12 mm Insert with 4 indexes
.43" Depth of cut
32-63 Ra surface finishes when engaging the wiper (WEP)
Insert corners: .015", .031", .062" R

DiPos-Tetra
TN1N - 45° Face Mill

Ø2.00-6.00"
.332" Depth of cut
16 mm Insert with 4 indexes
32-63 Ra surface finishes when engaging the wiper (WEP)

DiPos-Trio
DJ5F - 90° Rough & Finish Face Mill (Metric)

Ø40 - 100mm
9 mm Insert with 6 indexes
6.1mm Depth of cut
Finishes 20 - 32 Ra
Insert corners: .015", .020", .031", .039", .062" R

DiPos-Trio
DJ5F, DJ6F - 90° Rough & Finish Face Mill

Ø2.000-4.000"
9 mm Insert with 6 indexes
.24" Depth of Cut
20-32 Ra surface finishes when engaging the wiper (WEP)
Insert corners: .015", .020", .031", .039", .062" R

DiPos-Trio
DJ5P, DJ6P - 90° Rough & Finish Face Mill

Ø2.000-6.000"
13 mm Insert with 6 indexes
.36" Depth of Cut
20-32 Ra surface finishes when engaging the wiper (WEP)
Insert corners: .015", .031", .062" R

DiPos-Trio
DJ5P/DJ6P - 90° Rough & Finish Face Mill (Metric)

Ø50 - 160mm
13 mm Insert with 6 indexes
9.1mm Depth of cut
Finishes 20 - 32 Ra
Insert radii: .015", .031", .062" R

DiPos-Trio
WJ_D - 90° Rough & Ramp Face Mill

Ø32.00 - 63.00 mm
4 mm Insert with 6 indexes
3.80 mm Depth of cut
Finishes 63 - 125 Ra
Insert radii: .008", .015", .031" R
Great price-per-edge economy!

DiPos-Trio
WJ5F - 90° Rough & Ramp Face Mill

Ø2.000-4.000"
6 mm Insert with 6 indexes
.23" Depth of cut
Finishes as good as 80 Ra
Insert radii: .015", .031"

DiPos-Trio
WJ5F / WJ6F - 90° Rough & Ramp Face Mill (Metric)

Ø40.00 - 125.00 mm
6 mm Insert with 6 indexes
5.8mm Depth of cut
Finishes 63 - 125 Ra
Insert radii: .015", .031", .062" R

FormMaster
5W6S - Button Face Mill

Ø4.000–6.000”
1.000” IC Insert with 5-10 indexes
.500” Max. depth of cut
Variable land & flat rake face inserts for application flexibility
Heavy duty roughing!
Excellent performance & economy!

FormMaster Cera Plus
DW1H*R02, DW2H*R02 - Ceramic Button Face Mill

Ø2.000-3.000”
.500" IC insert, double sided
.250” Max. depth of cut
Secure Clamping, flat & dimple style inserts
Reliable performance, strength & economy!

FormMaster Pro
5E6H - Button Face Mill

Ø50-80 mm
12 mm Insert IC
Serrated insert offers 4 indexes
Round insert offers 8 indexes
Anti-rotation insert mounting
Strong inserts clamping screw for demanding applications
Reliable performance, strength & economy!

FormMaster Pro
5E6H - Button Face Mill

Ø2.000"
12 mm IC Insert
Serrated insert offers 4 indexes
Round insert offers 8 indexes
Anti-rotation insert mounting
Strong inserts clamping screw for demanding applications
Reliable performance, strength & economy!

FormMaster Pro
5E6K - Button Face Mill

Ø2.000-5.000"
16 mm IC Insert
Serrated insert offers 4 indexes
Round insert 8 offers 8 Indexes
Anti-rotation insert mounting
Strong inserts clamping screw for demanding applications
Reliable performance, strength & economy!

FormMaster Pro
5E6K - Button Face Mill

Ø100-160 mm
16 mm Insert IC
Serrated insert offers 4 indexes
Round insert 8 offers 8 Indexes
Anti-rotation insert mounting
Strong inserts clamping screw for demanding applications
Reliable performance, strength & economy!

FormMaster R
DE6G - Button Face Mill

Ø50-52 mm
10 mm IC insert with 4 indexes
.197" (5 mm) Max. depth of cut
Round & serrated inserts for application flexibility
Serrated insert for long reach application & chip management
Excellent performance & economy!

FormMaster R
DE6H - Button Face Mill

Ø50-80 mm
12 mm IC Insert with 8-16 indexes
.236" (6 mm) Max. depth of cut
Round & serrated inserts for application flexibility
Serrated insert for long reach application & chip management
Excellent performance & economy!

FormMaster R
DE6H - Button Face Mill

Ø2.000–3.000”
12 mm IC insert with 8-16 indexes
.236" (6 mm) Max. depth of cut
Round & serrated inserts for application flexibility
Serrated insert for long reach application & chip management
Excellent performance & economy!

FormMaster R
DE6K - Button Face Mill

Ø50-160 mm
16 mm IC insert with 4-8 indexes
.315" (8 mm) Max. depth of cut
Round & serrated inserts for application flexibility
Serrated insert for long reach application & chip management
Excellent performance & economy!

FormMaster Shear
1A7E - Button Face Mill

Ø2.000”
4 mm Max. depth of cut
8 mm IC insert
Reliable performance, strength & economy

FormMaster Shear
1A7G - Button Face Mill

Ø2.000”
10 mm IC Insert with 8 indexes
5 mm Max. depth of cut
Insert anti-rotation
Reliable performance, strength & economy

FormMaster Shear
1A7G - Button Face Mill

Ø40 mm
10 mm Insert IC with 8 indexes
5 mm Max. depth of cut
Insert anti-rotation
Reliable performance, strength & economy

FormMaster Shear
1A7H - Button Face Mill

Ø2.000-6.000”
12 mm IC Insert with 8 indexes
6 mm (.236”) Max. depth of cut
Insert anti-rotation
Reliable performance, strength & economy!

FormMaster Shear
1A7H - Button Face Mill

Ø2.000-4.000”
.500” IC Insert with 8 indexes
.250” Max. depth of cut
Insert anti-rotation
Reliable performance, strength & economy!

FormMaster Shear
1A7K - Button Face Mill

Ø2.000-6.000”
16 mm IC Insert with 8 indexes
8 mm (.315”) Max. depth of cut
Insert anti-rotation
Reliable performance, strength & economy!

FormMaster Shear
1A7M - Button Face Mill

Ø2.500-6.000”
20 mm (.787”) IC Insert with 8 indexes
.393” (10 mm) Max. depth of cut
Insert anti-rotation
Reliable performance, strength & economy!

FormMaster Shear
1A7M - Button Face Mill

Ø3.000-6.000”
.750” IC Insert with 8 indexes
.375” Max. depth of cut
Insert anti-rotation
Reliable performance, strength & economy!

FormMaster Shear
4W2A - Button Cartridge Face Mill

Ø8.000-12.000”
.750" IC Insert with 8 indexes
.375 Max. depth of cut
Four different insert edge preparations provide application flexibility
Cartridge pocket protection (sold separately)
Excellent performance & economy!

FormMaster V
5V6G - Backdraft Finish Face Mill

Ø2.00"
11 mm Insert with 4 indexes
.118" Max. depth of cut
.040" Wiping flat

GoldMax 4
SJ2J - 90° Heavy-Duty Face Mill

Ø5.000-8.000"
Insert with 4 indexes
.54" Max. Depth of Cut
Replaceable steel seating pads ensure maximum cutter body life

GoldMax 4
SJ5J, SJ6J - 90° Face Mill

Ø3.000-4.000"
14.5 mm Insert with 4 indexes
.54" Max. depth of cut
SJ5 High-density
SJ6 Medium-density

GoldMax 4
SJ5Y, SJ6Y- 90° High-Density Face Mill

Ø1.500-2.500"
8.4 mm insert with 4 indexes
.31" Max. Depth of Cut
Insert corners: .015", .031", .062" R

GoldMax 4
SJ6F, SJ5F- 90° Face Mill

Ø2.000-5.000"
11 mm Insert with 4 indexes
.42" Max. depth of cut
Insert corners: .031", .062", .093", .125" R
Medium-density

GoldMax 4
SN2J - Heavy Duty 45° Face Mill

Ø3.00-8.00"
.32" Max. depth of cut
14.5 mm Insert with 4 indexes
Replaceable steel seating pads ensure maximum cutter body life

GoldMax 4
SN6J - 45° Face Mill

Ø3.00-8.00"
.32" Max. depth of cut
14.5 mm Insert with 4 indexes
3 Insert types for every application

GoldMax 4 FFIN
EF6J - Hi-Feed Finishing Face Mill

Ø2.000-8.000"
14.5 mm Insert with 4 indexes
.040" Max. depth of cut
10° Lead angle hi-feed finisher
8-24 Ra Finish

GoldMax 8
VJ6K - 90° Face Mill

Ø2.000-8.000"
Insert with 8 indexes
.36" Max. depth of cut

GoldQuad
5J5P - 90° Face Mill

Ø2.000-4.000"
13 mm Insert with 4 indexes
.45" Depth of Cut
Finishes as good as 40 Ra
Insert corners: .031, .047, .062, .093, .125"

GoldQuad Extcut
5J5P-R - 90° Face Mill

Ø2.000-4.000"
13 mm Insert with 2 indexes
.45" Depth of Cut
Finishes as good as 40 Ra
Insert Corner: .250"

GoldQuad XXX
5G5Q, 5G6Q - Mid Feed Face Mill

Ø2.500-6.000”
16 mm IC insert with 4 indexes
.250" (6.4 mm) Max. depth of cut
30° Mid-feed rougher
Three different insert edge preparations provide application flexibility
Extremely free cutting!
Excellent high feed performance & economy!

GoldQuad XXX
5M5M, 5M6M - Mid-Feed Face Mill

Ø4.000-6.000”
19 mm IC insert with 4 indexes
.310" (7.87 mm) Max. depth of cut
30° Mid-feed rougher
Multiple insert styles for application flexibility
High material removal rates!
Extremely free cutting!
Excellent performance & economy!

GoldQuad XXX
5M5P, 5M6P - Mid-Feed Face Mill

Ø2.000-3.000”
13 mm IC insert with 4 indexes
.200" (5.08 mm) Max. depth of cut
30° Mid-feed rougher
Multiple insert styles for application flexibility
High material removal rates!
Extremely free cutting!
Excellent Performance & Economy!

GoldSFeed
5G1D - Hi-Feed Face Mill

Ø1.500-2.000”
6 mm insert with 4 indexes
.040" (1.5 mm) Max. depth of cut
12° Hi-feed rougher
Multiple insert styles for application flexibility
.040” Insert wiper, face and O.D.
Extremely free cutting!
Excellent performance & economy!

GoldSFeed
5G5F, 5G6F - Hi-Feed Face Mill

Ø2.000-3.000”
9 mm insert with 4 indexes
.060" (1.5 mm) Max. depth of cut
12° Hi-feed rougher
Multiple insert styles for application flexibility
.060” Insert wiper, face and O.D.
Extremely free cutting!
Excellent performance & economy!

GoldSFeed
5G5M, 5G6M - Hi-Feed Face Mill

Ø3.000-7.000”
19 mm insert with 4 indexes
.147" (3.7 mm) Max. depth of cut
12° Hi-feed rougher
Seven different insert edge preparations provide application flexibility
Extremely free cutting!
Excellent Hi-Feed performance & economy!

GoldSFeed
5G5M, 5G6M - Hi-Feed Face Mill

Ø80-160 mm
19 mm insert with 4 indexes
.147" (3.7 mm) Max. depth of cut
12° Hi-feed rougher
Seven different insert edge preparations provide application flexibility
Extremely free cutting!
Excellent Hi-Feed performance & economy!

GoldSFeed
5G5Q, 5G6Q - Hi-Feed Face Mill

Ø2.500-10.000”
16 mm insert with 4 indexes
.107" (2.7 mm) Max. depth of cut
12° Hi-feed rougher
Three different insert edge preparations provide application flexibility
Extremely free cutting!
Excellent high feed performance & economy!
8" and 10" diameter tools do NOT have coolant through.

GoldSFeed
5M5P, 5M6P - Hi-Feed Face Mill

Ø 50-100 mm
13 mm insert with 4 indexes
.088" (2.2 mm) Max. depth of cut
12° Hi-feed rougher
Seven different insert edge preparations provide application flexibility
Extremely free cutting!
Excellent hi-feed performance & economy!

GoldSFeed
5M5P, 5M6P - Hi-Feed Face Mill

Ø2.000-5.000”
13 mm insert with 4 indexes
.088" (2.2 mm) Max. depth of cut
12° Hi-feed rougher
Seven different insert edge preparations provide application flexibility
Extremely free cutting!
Excellent hi-feed performance & economy!

HiPos-Alu
AX2K - 90° Router Face Mill for Aluminum

Ø2.000-6.000"
16 mm Insert with 2 Indexes
.63" Depth of Cut
V-Shape with key drive pocket ideal for high RPM
Finishes as good as 15 Ra
Insert Corners: .015", .031", .062", .094", .125", .197" R

HiPos-Alu
AX2Q - 90° Router Face Mill for Aluminum

Ø2.000-6.000"
22 mm Insert with 2 indexes
.83" Depth of Cut
V-Shape with key drive pocket ideal for high RPM
Finishes as good as 15 Ra
Insert corners: .020", .031", .062", .118", .197", .250" R

HiPos-Micro
2J1D - 90° Face Mill

Ø32-40 mm
6 mm Insert with 2 indexes
5.7 mm Depth of Cut
32-63 Ra surface finishes when engaging the wiper (WEP)
Insert corners: SC, 0.2, 0.4, 0.8, 1.6mm R & Hi-Feed

HiPos-Plus
22_3R - Chamfer Shell Mill

Ø45 mm Min.
13 mm Insert with 2 indexes
33 mm cutting edge length
Cutting Edge Angles: 15° 30° 45° 60° & 75°
Included Angles: 150° 120° 90° 60° & 30°
All Eff. / RH Helix

HiPos-Plus
22_3R - Chamfer Shell Mill

Ø1.750" Min.
13 mm Insert with 2 indexes
1.30" cutting edge length
Cutting Edge Angles: 15° 30° 45° 60° & 75°
Included Angles: 150° 120° 90° 60° & 30°
All Eff. / RH Helix

HiPos-Plus
2J1G - 90° Face Mill

Ø40-160 mm
17 mm Insert with 2 indexes
16 mm Depth of Cut
32-63 Ra surface finishes when engaging the wiper (WEP)
Insert corners: 0.4, 0.8, 1.0, 1.6, 2.4, 3.2, 4.0, 4.8, 6.4 mm R

HiPos-Plus
2J1G - 90° Face Mill

Ø2.000-8.000"
17 mm Insert with 2 indexes
.63" Depth of Cut
32-63 Ra surface finishes when engaging the wiper (WEP)
Insert corners: .015", .031", .062", .093", .125", .156", .187", .250" R

HiPos-Plus
2J1P - 90° Face Mill

Ø32-100 mm
9 mm Insert with 2 indexes
9 mm Depth of Cut
32-63 Ra surface finishes when engaging the wiper (WEP)
Insert corners: 0.4, 0.8, 1.6, 2.0 & 3.1 mm R

HiPos-Plus
2J1P - 90° Face Mill

Ø1.500-3.000"
9 mm Insert with 2 indexes
.35" Depth of Cut
32-63 Ra surface finishes when engaging the wiper (WEP)
Insert corners: .015", .031", .062", .078", .120" R

HiPos-Plus
2J1R - 90° Face Mill

Ø35-125 mm
13 mm Insert with 2 indexes
12 mm Depth of Cut
32-63 Ra surface finishes when engaging the wiper (WEP)
Insert corners: 0.4, 0.8, 1.6, 2.0, 2.4 3.1 & 4.0 mm R

HiPos-Plus
2J1R - 90° Face Mill

Ø2.000-5.000"
13 mm Insert with 2 indexes
.47" Depth of cut
32-63 Ra surface finishes when engaging the wiper (WEP)
Insert corners: .015", .031", .062", .078", .093", .125", .156" R

HiPos-Plus
2J5P - 90° Adjustable Finish Mill

Ø32.00 - 80.00mm
9 mm Insert with 2 indexes
9.00mm Depth of Cut
15-32 Ra surface finishes when engaging the wiper (WEP)
Insert corners: .015", .031", .062", .078", .120" R
Cutter design mills on face and shoulder

HiPos-Plus
2L1G - 75° Roughing Face Mill

Ø4.000"
17 mm Insert with 2 indexes
.15" Depth of cut
Insert Corner: .03" R
Uses opposing unused edges of AOMT17 insert, offering the value to obtain 4 indexes.
Ideal for squaring up blocks and general facing.

HiPos-Plus
4W2A - 90° Cartridge Face Mill

Ø8.000-12.000"
18 mm Insert with 2 indexes
.66" Depth of Cut
Cartridge pocket protection (sold separately)

HiPos-Quad
4W2A - 45° Cartridge Face Mill

Ø8.000-12.000"
15 mm Insert with 4 indexes
.40" Depth of cut
Cartridge pocket protection (sold separately)

HiPos-Quad
5N6F - 45° Face Mill

Ø2.000-3.000"
9.6 mm Insert with 4 indexes
.18" Depth of cut
32-63 Ra surface finishes

HiPos-Quad
5N6R - 45° Face Mill

Ø3.000-6.000"
15 mm Insert with 4 indexes
.40" Depth of cut
Finishes as good as 40 Ra

HiPos-Trio
KJ5D, KJ6D - 90° Face Mill

Ø35-63 mm
6 mm Insert with 3 indexes
7 mm Depth of Cut
32-63 Ra surface finishes when engaging the wiper (WEP)
Insert corners: 0.4, 0.8 & 1.6 mm R

HiPos-Trio
KJ5D, KJ6D - 90° Face Mill

Ø1.500-3.000"
6 mm Insert with 3 indexes
.27" Depth of Cut
32-63 Ra surface finishes when engaging the wiper (WEP)
Insert corners: .015", .031", .062" R

HiPos-Trio
KJ5G, KJ6G - 90° Face Mill

Ø1.500-5.000"
10 mm Insert with 3 indexes
.41" Depth of cut
32-63 Ra surface finishes when engaging the wiper (WEP)
Insert corners: .015", .031", .062", .094" R

HiPos-Trio
KJ5G, KJ6G - 90° Face Mill

Ø50-125 mm
11 mm Depth of Cut
10 mm Insert with 3 indexes
32-63 Ra surface finishes when engaging the wiper (WEP)
Insert corners: 0.4, 0.8, 1.6 & 2.4 mm R

HiPos-Trio
KJ5P, KJ6P - 90° Face Mill

Ø63-160 mm
13 mm Insert with 3 indexes
15 mm Depth of cut
32-63 Ra surface finishes when engaging the wiper (WEP)
Insert corners: 0.8, 1.6, 2.4 & 3.2mm R

HiPos-Trio
KJ5P, KJ6P - 90° Face Mill

Ø2.000-6.500"
13 mm Insert with 3 indexes
.57" Depth of Cut
32-63 Ra surface finishes when engaging the wiper (WEP)
Insert corners: .015", .031", .062", .094", .125" R

HiPosWinV
VX_F_R01 - 90° Router Face Mill

Ø1.500-3.000"
10 mm Insert with 2 indexes
.39" Depth of Cut
32-63 Ra surface finishes when engaging the wiper (WEP)
Insert corners: .015" .031" & .062" R
V-Bottom pocket fosters easy insert indexing & minimizes insert screw stress

HiPosWinV
VX_F_R02 - Router, Lg Cnr Rad & Hi-Feed

Ø1.500-3.000"
10 mm Insert with 2 indexes
.39" Depth of Cut
32-63 Ra surface finishes when engaging the wiper (WEP)
Insert corners: .078" .118" .125" R & Hi-Feed
V-Bottom pocket fosters easy insert indexing & minimizes insert screw stress

Iron-Eater
5J2H - 45° SiNi Face Mill

Ø3.00-4.00"
Quad depth of cut: .24"
Octo depth of cut: .15"
Wedge held inserts
Pre-balanced

Iron-Eater
5J2H - 90° SiNi Face Mill

Ø3.000-4.000"
Quad depth of cut: .24"
Octo depth of cut: .15"
Wedge held inserts
Pre-balanced

ISO-Plus
DD6H - Hi-Feed Face Mill

Ø2.000-6.000"
12 mm Insert with 8 indexes
.065" Depth of cut
Great price-per-edge economy!

ISO-Plus
DJ5T, DJ6T - 90° Face Mill

Ø2.000-8.000"
13 mm Insert with 8 indexes
.24" Depth of Cut at 90°
40-80 Ra surface finishes when engaging the wiper (WEP)
Carbide and SiN insert options
Insert corners: .015, .031, .047, .062"

ISO-Plus
DK1G - 85° Face Mill

Ø40-315 mm
11 mm Insert with 8 indexes
8.3 mm Depth of Cut
32-63 Ra finishes
Carbide & SiN options
Great Price-per-Index economy!
Insert Corner: 0.8 mm R.

ISO-Plus
DL5H, DL6H - 75° Face Mill

Ø2.000-6.000"
12 mm Insert with 8 indexes
.35" Depth of cut
Carbide & SiN options
Great Price-per-Edge economy!

ISO-Plus
DL5T, DL6T - 85° Roughing Face Mill

Ø2.000-6.000"
13 mm Insert with 8 indexes
.49" Depth of Cut
Finishes as good as 100 Ra
Carbide & SiN options
Great Price-per-Index economy!
Insert Corner: .015", .031", .047, .062" R.

ISO-Plus
DN5H, DN6H - 45° Face Mill

Ø50-250 mm
12 mm Insert with 8 indexes
6 mm Depth of cut
Finishes as good as 8 Ra when using wiper in one pocket
Great price-per-edge economy!

ISO-Plus
DN5H, DN6H - 45° Face Mill

Ø2.000-6.000"
12 mm Insert with 8 indexes
.23" Depth of cut
Finishes as good as 8 Ra when using wiper in one pocket
Great price-per-edge economy!

ISO-Plus
DQ5T, DQ6T - 88° Face Mill

Ø50-200 mm
13 mm Insert with 8 indexes
11.4 mm Depth of Cut
40-80 Ra surface finishes when engaging the wiper (WEP)
Carbide and SiN insert options
Insert corners: 0.4, 0.8, 1.2 & 1.6 mm

MaxSFeed
1EJ7A - 90° High-Density Face Mill

Ø25-40mm
5 mm insert with 4 indexes
.180" Max. Depth of Cut
Insert corner: .015" R

MaxSFeed
EJ5B, EJ6B - 90° High-Density Face Mill

Ø1.500-3.000"
8 mm insert with 4 indexes
.317" Max. Depth of Cut
Insert corners: .015", .031", .062" R

MaxSFeed
EJ5C, EJ6C - 90° High-Density Face Mill

Ø1.500-4.000"
11 mm insert with 4 indexes
.385" Max. Depth of Cut
Insert corners: .031", .062", .125" R

MaxSFeed
EJ5D, EJ6D - 90° Face Mill

Ø2.000-6.000"
13 mm insert with 4 indexes
.479" Max. depth of cut
Insert corners: .031", .062", .125" R

MaxSFeed
EN5J - 45° Face Mill

Ø2.000-6.000"
13 mm insert with 4 indexes
.315" Max. depth of cut
Insert corner: .010" R

MicroMill
2F5D / 2F6D - Finish & Undercut Face Mill

Ø50.00 - 125.00mm
11 mm Insert with 3 Indexes
0.3 mm Max Depth of Cut
Insert corners: 0.2, 0.4 & 0.8 mm
Finishes as good as 15 Ra
Carbide, Cermet, CBN & PCD insert offerings
Capable of undercutting a relief into a 90° shoulder

MicroMill
6F2B Finish Face Mill

Ø50 mm - 315 mm
12.7 mm Finishing Insert with 2 Indexes
0.5 mm Max Depth of Cut
Easy & accurate adjustment within 0.005 mm
DC is measured at the center of the crowned insert
Finishes 15 - 32 Ra
Can mill up to 90° shoulder

NuMaxHF
8G5A, 8G6A - Hi-Feed Face Mill

Ø2.000-4.000”
15.5 mm Insert with 4 indexes
.058" Depth of cut
12.7° Hi-feed rougher
Heavy duty & super strong!
Excellent performance & economy!

NuMaxHFA
EG5J, EG6J - Hi-Feed Face Mill

Ø2.000-8.000”
12.7 mm IC Insert with 4 indexes
.070" Depth of cut (APMX .090")
10° Hi-feed rougher
Double Dovetail Insert Seating for Maximum Stability
Heavy duty & super strong!
Excellent performance & economy!

OctoPlus
ON5H, ON6H - 43° Face Mill

Ø1.500-6.000"
5 mm Insert with 16 indexes
.12" Depth of cut
Finishes as good as 20 Ra when using wiper in one pocket
Carbide & SiN options
Great Price-per-Edge economy!

OctoPlus
ON5H, ON6H - 43° Face Mill (Metric)

Ø40.00 - 160.00mm
5 mm Insert with 16 indexes
3.00mm Depth of cut
Finishes as good as 20 Ra when using wiper in one pocket
Carbide & SiN options
Great Price-per-Edge economy!

OctoPlus
OP1N - 42° Face Mill with Wedge-Held Inserts

Ø3.000-12.000"
.20" Depth of cut
9 mm Inserts with 16 indexes
20-40 Ra surface finishes when using wiper in one pocket
Carbide & SiN options
RH & LH rotation
Great price-per-edge economy!

OctoPlus
OP1N - 43° Face Mill with Wedge-Held Inserts

Ø80.00 - 315.00 mm
5.00 mm Depth of cut
9 mm Inserts with 16 indexes
20-40 Ra surface finishes when using wiper in one pocket
Carbide & SiN options
RH rotation
Great price-per-edge economy!

OctoPlus
OP5N / OP6N - 43° Face Mill (Metric)

Ø63.00 - 315.00mm
9 mm Inserts with 16 indexes
5.00mm Depth of cut
Finishes as good as 20 Ra when using wiper in one pocket
Carbide & SiN options
Great price-per-edge economy!

OctoPlus
OP6N - 43° Face Mill

Ø2.500-12.000"
9 mm Inserts with 16 indexes
.20" Depth of cut
Finishes as good as 20 Ra when using wiper in one pocket
Carbide & SiN options
Great price-per-edge economy!

PowerFeed 13+
4W2A - Hi-Feed Cartridge Face Mill

Ø8.000-12.000”
13 mm IC Insert with 6 indexes
2 mm (.078") Max. depth of cut
Cartridge pocket protection (sold separately)
Three different insert edge preparations provide application flexibility
Excellent hi-feed performance & economy!

PowerFeed 13+
DG6P, DG5P - Hi-Feed Face Mill

Ø2.00-6.00”
13 mm IC insert with 6 indexes
2 mm (.078") Max. depth of cut
Three different insert edge preparations provide application flexibility
Excellent hi-feed performance & economy!

QuadPlus Finish
DJ1H - 90° Adjustable Finishing Face Mill

Ø50 - 250 mm
12 mm Insert with up to 8 indexes
1 mm Max. Depth of Cut (0.5 mm recommended)
Easy & accurate adjustment within 0.005 mm
0.12 - 0.25 Ra surface finish capability

QuadPlus Finish
DJ1H - 90° Adjustable Finishing Face Mill

Ø2.000-8.000"
12 mm Insert with up to 8 indexes
.040" Max. Depth of Cut (.020" recommended)
Easy & accurate adjustment within .0002"
5-20 Ra surface finish capability

RotoMill
5N6H - 45° & Button Face Mill

Ø2.000-4.000"
5 mm Insert with 8 indexes
.13" Depth of cut
Finishes as good as 63 Ra
Octo and Button insert options

RotoMill
5N6L - 45° Face Mill

Ø2.000-4.000"
7 mm Insert with 8 Indexes
.19" Depth of cut
Finishes as good as 63 Ra

RotoMill
5N6L 5N5L- 45° Face Mill (Metric)

Ø50 - 160 mm
7 mm Insert with 8 Indexes
11.8 mm Depth of cut
Finishes as good as 63 Ra

RoughAir
15_1H - Chamfer Face Mill

45 mm Min
25 mm Insert with 2 indexes
Cutting Edge Angles: 15° 30° 45° 60° & 75°
Included Angles: 150° 120° 90° 60° & 30°
22.8 mm cutting edge length

RoughAir
5X6W - 90° Aluminum Router Face Mill

Ø2.00-6.00"
14 mm Insert with 2 indexes
.61" Depth of Cut
2-Screw clamping ideal for high MRR
Finishes as good as 15 Ra
Insert corners: .020" .031" .062" .079" .093" .125" .157" R

RoughAir
5X6W - 90° Aluminum Router Face Mill

Ø50.00 - 80.00 mm
14 mm Insert with 2 indexes
15.7 mm Depth of Cut
2-Screw clamping ideal for high MRR
Finishes as good as 15 Ra
Insert corners: .031" .062" .079" .093" .125" .197" R

RoughAir
5X6X - 90° Aluminum Router Face Mill

Ø2.000-6.000"
25 mm Insert with 2 indexes
.82" Depth of Cut
2-Screw clamping ideal for high MRR
Finishes as good as 15 Ra
Insert corners: .031" .062" .079" .093" .125" .197" R

RoughAir
5X6X - 90° Aluminum Router Face Mill

Ø50.0 - 125.0 mm
25 mm Insert with 2 indexes
20.8 mm Depth of Cut
2-Screw clamping ideal for high MRR
Finishes as good as 15 Ra
Insert corners: .031" .062" .079" .093" .125" .197" R

RoughAir
5X6Z - 90° Aluminum Router Face Mill

Ø2.500 - 10.000"
33 mm Insert with 2 Indexes
.99" Max. Depth of Cut
2-Screw clamping ideal for high MRR
Finishes as good as 15 Ra
Insert corners: .031" .062" .125" .250" R

SMax
SJ2N, SJ6N - 90° Heavy Duty Face Mill

Ø4.000-12.000"
Insert with 4 indexes
.68" Max. depth of cut
2 Different steel seating pads accomodate both general purpose and heavy duty inserts
SJ2N offers pocket protection

SMax
SN2N - 45° Heavy Duty Face Mill

Ø5.000-12.000"
18 mm Insert with 4 R.H. indexes
.35" Max. depth of cut
Two different steel seating pads accomodate general purpose and heavy duty inserts

SMax
SN2R - 45° Heavy Duty Face Mill

Ø4.000-12.000"
25 mm Insert with 4 indexes
.53" Max. depth of cut

SMax
SN6N - 45° Face Mill

Ø4.000-6.000"
18 mm Insert with 4 R.H. indexes
.35" Max. depth of cut

SuperMax
9M2L - 60° Heavy Duty Face Mill

Ø4.000-12.000"
Insert with 4 indexes
.76" Max. depth of cut
Screw-held inserts with pocket protection
Power shear geometry ideally suited for hard materials, weld

TediFeed
TRGSM - 75° PCD/CBN Adjustable Face Mill

Ø2.500-10.000"
0.43" Max. Depth of Cut
Bi-metal or steel bodies

TediFeed
TRGSM - 75° PCD/CBN Adjustable Face Mill

Ø1.500-2.000"
0.43" Max. Depth of Cut
Steel bodies

TediFeed
TRGSM - 75° PCD/CBN Adjustable Face Mill w/ Wiper

Ø4.000-10.000"
0.43" Max. Depth of Cut
Bi-metal bodies

TediFeed
TRGSM - 90° PCD/CBN Adjustable Face Mill

Ø2.500-10.000"
0.43" Max. Depth of Cut
Steel or bi-metal cutter bodies

TediFeed
TRGSM - 90° PCD/CBN Adjustable Face Mill

Ø1.500-2.000"
0.43" Max. Depth of Cut
Steel cutter bodies

TediFeed
TRGSM - 90° PCD/CBN Adjustable Face Mill w/ Wiper

Ø4.000-10.000"
0.43" Max. Depth of Cut
Bi-metal cutter bodies

TediFeed
TRGSM - Fixed Pocket 75° PCD/CBN Face Mill

Ø2.500-5.000"
0.43" Max. Depth of Cut

TediFeed
TRGSM - Fixed Pocket 75° PCD/CBN Face Mill

Ø1.500-2.000"
0.43" Max. Depth of Cut

TediFeed
TRGSM - Fixed Pocket 90° PCD/CBN Face Mill

Ø2.50-5.00" Fixed Pocket Face Mill
0.43" Max DOC

TediFeed
TRGSM - Fixed Pocket 90° PCD/CBN Face Mill

Ø1.50-2.00" Fixed Pocket Face Mill
0.43" Max DOC

TediFeed
TUGSM - 75° PCD/CBN Adjustable Face Mill

Ø63-250 mm
11 mm Max. Depth of Cut
Bi-metal or steel bodies

TediFeed
TUGSM - 75° PCD/CBN Adjustable Face Mill

Ø40-50 mm
0.43" Max. Depth of Cut
Titanium or steel bodies

TediFeed
TUGSM - 75° PCD/CBN Adjustable Face Mill w/ Wiper

Ø125-250 mm
0.43" Max. Depth of Cut
Bi-metal bodies

TediFeed
TUGSM - 90° PCD/CBN Adjustable Face Mill

Ø63-250 mm
0.43" Max. Depth of Cut
Bi-metal or steel bodies

TediFeed
TUGSM - 90° PCD/CBN Adjustable Face Mill

Ø40-50 mm
0.43" Max. Depth of Cut
Steel bodies

TediFeed
TUGSM - 90° PCD/CBN Adjustable Face Mill w/ Wiper

Ø125-250 mm
0.43" Max. Depth of Cut
Bi-metal bodies

TediMill
FIP - 75° Cartridge Face Mill

Ø2.000-10.000"
3 or 6 mm Depth of cut
Aluminum or steel bodies

TediMill
FIP - 90° Cartridge Face Mill

Ø2.000-10.000"
3 or 6 mm Depth of cut
Aluminum or steel bodies

TediMill
FTP - 75° Cartridge Face Mill

Ø40-400 mm
3 or 6 mm Depth of cut
Aluminum, titanium, or steel bodies

TediMill
FTP - 90° Cartridge Face Mill

Ø40-400 mm
3 or 6 mm Depth of cut
Aluminum, titanium, or steel bodies

TediOctoCut
TOCBA - 45° Cartridge Face Mill-CBN

Ø100-250 mm
1 mm / .039" Depth of cut
9 mm Insert with 8 indexes
Cartridge pocket protection (included)
Great price-per-edge economy!

TediSFeed
TXGSM - 75° PCD Adjustable Face Mill

Ø50-125 mm
4 mm Max. Depth of Cut
Bi-metal or steel bodies

TediSFeed
TXGSM - 75° PCD Adjustable Face Mill

Ø2.000-5.000"
0.16" Max. Depth of Cut
Aluminum or bi-metal bodies

TediSFeed
TXGSM - 90° PCD Adjustable Face Mill

Ø50-125 mm
4 mm Max. Depth of Cut
Bi-metal or steel bodies

TediSFeed
TXGSM - 90° PCD Adjustable Face Mill

Ø2.000-5.000"
0.16" Max. Depth of Cut
Bi-metal or steel bodies

VMax
VK5V - 90° High Density Face Mill

Ø2.000-4.000"
Inserts with up to 8 indexes (4RH/4LH)
.46" Max. depth of cut (2RH/2LH)
.23" Max. depth of cut at 90° (4RH/4LH)
Left & right hand cutter bodies
Insert radii: .031", .063", .125"
Insert chamfer: .031" x 45°

VMax
VK6V - 90° Medium Density Face Mill

Ø2.000-4.000"
Inserts with up to 8 indexes (4RH or 4LH)
.46" Max. depth of cut (2RH or 2LH)
.23" Max. depth of cut at 90° (4RH or 4LH)
Left & right hand cutter bodies
Insert corners: .031", .063", .125"R & .031" x 45°

Milling

Holemaking

ISO Turning
Grade &
Chipbreaker

Turning
Grades

Turning
Chipbreakers

Turning Inserts

Turning Holders & Boring Bars

Turning Holders & Boring Bars

Machining
App

RapidThread
Advisor

Product Lines

Industries

QwikMod

Big Cutter One - Next Stop

Big Cutter Two - Next Stop

In-Person
Seminars

Mobile
Seminars

Tech
Support

Customer
Service

Filter Your Results

Product Categories

Product Categories

Milling

Holemaking

ISO TurningGrade &Chipbreaker

TurningGrades

TurningChipbreakers

Turning Inserts

Turning Holders & Boring Bars

Turning Holders & Boring Bars

MachiningApp

RapidThreadAdvisor

Catalogs

Ingersoll TV

Product Lines

Industries

QwikMod

Our Most Recent QwikCuts

Big Cutter One - Next Stop

Big Cutter Two - Next Stop

In-PersonSeminars

MobileSeminars

Our Upcoming Trade Shows

Address:

Phone or E-Mail:

TechSupport

CustomerService

Filter Your Results

Product Categories

Product Categories

ISO Turning
Grade &
Chipbreaker

Turning
Grades

Turning
Chipbreakers

Machining
App

RapidThread
Advisor

In-Person
Seminars

Mobile
Seminars

Tech
Support

Customer
Service