Log In
Careers About Us
Ingersoll Logo Ingersoll Logo
  • Products
    • Indexable Milling

      Indexable Milling

      • Face Mills

        Face Mills

      • End Mills

        End Mills

      • Milling Inserts

        Inserts

      • Slotters

        Slotters

      • Plunge Mills

        Plunge Mills

      • All Indexable Milling

        All Indexable Milling

    • Solid Milling

      Solid Milling

      • Solid

        Solid

      • Modular

        Modular

      • Modular

        Brazed PCD

      • All Solid Milling

        All Solid Milling

    • Boring & Reaming

      Boring & Reaming

      • Precision Boring

        Precision Boring

      • Reamers

        Reamers

      • All Boring & Reaming

        All Boring & Reaming

    • Holemaking Tools

      Holemaking Tools

      • Counterbore Tools

        Counterbore Tools

      • Deep Hole

        Deep Hole

      • Drilling

        Drilling

      • Spotting Engraving

        Spotting/Engraving

      • All Holemaking

        All Holemaking

    • Parting & Grooving

      Parting & Grooving

      • Holders

        Holders

      • Inserts

        Inserts

      • Adapters

        Adapters

      • Micro Tools

        Micro Tools

      • All Parting & Grooving

        All Parting & Grooving

    • Threading

      Threading

      • Thread Milling

        Thread Milling

      • Thread Turning

        Thread Turning

      • All Threading

        All Threading

    • Tool Holding

      Tool Holding

      • Coolant Driven Spindles

        Coolant Driven Spindles

      • Toolholders

        Toolholders

      • Modular Toolholders

        Modular Toolholders

      • ITTEDI

        IT.TE.DI. Holders

      • All Tool Holding

        All Tool Holding

    • Turning

      Turning

      • Turning Holders

        Turning Holders

      • Turning Boring Bars

        Turning Boring Bars

      • Turning Inserts

        Turning Inserts

      • Micro Tools

        Micro Tools

      • Multi-Function Tools

        Multi-Function Tools

      • All Turning

        All Turning

    • Tool Storage

      Tool Storage

      • Matrix Mini

        Matrix Mini

      • Matrix Maxi

        Matrix Maxi

  • Industry Solutions
  • Events
    • Big Cutter Seminars
    • Live Seminars
    • Trade Shows
  • Resources
    • Product Lines
    • Catalogs
    • Ingersoll TV
    • Machining App
    • Rapid Thread Advisor
    • Insert Info (Grades, etc.)
      • Milling Insert Grades
      • Holemaking Insert Grades
      • Turning Insert Master
      • Turning Grades Cross References
      • Chipbreaker Cross References
    • Qwik-Cuts Newsletters
    • Product Announcements
  • About Us
    • Our Profile
    • Photos
    • Our History
    • Careers
    • Ingersoll Germany
  • Contact Us
    • Tech Support
    • Customer Service
    • Address:
      Ingersoll Cutting Tools
      845 S. Lyford Rd.
      Rockford, IL 61108

    • Phone & Email
      Tel: 815-387-6600
      Email: info@ingersoll-imc.com
      Fax: 815-387-6337

Ingersoll Logo Ingersoll Logo
  • Products
    • Indexable Milling
      • View All Indexable Milling Products...
      • Indexable Milling
      • milling facemill

        Face Mills

        milling endmill

        End Mills

        Milling Inserts

        Inserts


        plungemill

        Plunge Mills

        slotter

        Slotters

    • Solid Milling
      • View All Solid Milling Tools...
      • Solid Milling
      • solid carbide end mill

        Solid

        modular

        Modular

        solid carbide end mill

        Brazed PCD

    • Boring & Reaming
      • View All Boring & Reaming Products...
      • Boring & Reaming Tools
      • precision boring

        Precision Boring

        reamers

        Reamers

    • Holemaking
      • View All Holemaking Tools...
      • Holemaking Tools
      • counterbore tools

        Counterbore Tools

        Deep Hole

        Deep Hole


        Drilling

        Drilling

        Spotting Engraving

        Spotting/Engraving

    • Parting & Grooving
      • View All Parting & Grooving Products...
      • Parting & Grooving
      • Holders

        Holders

        Inserts

        Inserts


        Adapters

        Adapters

        Micro Tools

        Micro Tools

    • Threading
      • View All Threading Tools...
      • Threading Tools
      • Thread Milling

        Thread Milling

        Thread Turning

        Thread Turning

    • Tool Holding
      • View All Tool Holders...
      • Tool Holders
      • Coolant Driven Spindles

        Coolant Driven Spindles

        Toolholders

        Toolholders


        Modular Toolholders

        Modular Toolholders

        ITTEDI

        IT.TE.DI. Holders

    • Turning Tools & Inserts
      • View All Turning Products...
      • Turning Tools and Inserts
      • Turning Holders

        Turning Holders

        Boring Bars

        Boring Bars

        Inserts

        Inserts


        Micro Tools

        Micro Tools

        Multi-Function

        Multi-Function

    • Tool Storage
      • View All Matrix Tool Storage...
      • Matrix Tool Storage
      • Matrix Maxi

        Matrix Maxi

        Matrix Mini

        Matrix Mini

    • Product Announcements
  • Resources
    • Product Resources Product Lines (ePIPs), Industries
    • Media Catalog & Product PDFs, IngersollTV
    • Insert InformationGrades, Chipbreakers, Cross-References
    • Apps/CalculatorsMachining App, Threading Advisor
    • Qwik-CutsView Qwik-Cuts Newsletters
    Insert Grade Info

    Milling

    Searchable
     
    Insert Grade Info

    Holemaking

    Searchable
     
    Insert Master

    Turning

    Insert Guide
    Insert Cross-Reference

    Turning Grades

    Insert Cross-Reference

    Turning Chipbreakers

     
    MachiningApp

    Machining
    App

    User-Friendly Machining Calculator

    Rapid Thread Advisor

    RapidThread
    Advisor

    Select the Correct Threading Tool

     
    Catalogs

    Catalogs

    View & Download Product Catalogs

    Ingersoll TV

    Ingersoll TV

    See Our Tools in Action!

    Product Lines

    Product Lines

    View All of Our Tooling Options

    Industry Solutions

    Industries

    Learn About our Industry Solutions

    Our Most Recent Qwik-Cuts

    Qwik-Cut May 20, 2022

    May 20, 2022

    TClamp CBN Hi-Feed Bi-Direction Turning in Hardened Materials

    Qwik-Cut May 3, 2022

    May 3, 2022

    DeepDuo Deep Hole Drills, w/Dual Guide Pads & 2-Index Inserts

    Qwik-Cut April 8, 2022

    April 8, 2022

    In Two Months, Ingersoll’s Turning Seminar is BACK!

    Qwik-Cut April 1, 2022

    April 1, 2022

    MiniTurn: 4 Lines Targeting Swiss Automatic Machines

    Qwik-Cut March 23 2022

    March 23, 2022

    RhinoDrills Thru-Coolant, Double-Margin 3xD, 5xD & 8xD Drills

     

    View All Qwik-Cuts

  • Events
    • Seminars Attend a live or mobile seminar
    • The BIG CutterFind out where the Big Cutters are
    • Trade Shows Find out where we'll be next

    Big Cutter One - Next Stop

    Big Cutter


    ,

    Big Cutter Two - Next Stop

    Big Cutter


    ,

     

    Visit the Big Cutter Page

    Live Seminars

    Live
    Seminars

    View our Schedule

    The Big Cutter Mobile Seminar

    Mobile
    Seminars

    View our Schedule

    View the Trade Show Page...

    Our Upcoming Trade Shows

    Show Name Dates Location Website
    Motion + Power Technology Expo (formerly Gear Expo) September 14-16, 2021 St. Louis, MO Show Website
    South-Tec October 26-28, 2021 Greenville, SC Show Website
  • Contact Us

    Address:

    Ingersoll Cutting Tools
    845 S. Lyford Rd.
    Rockford, Illinois 61108

    Phone or E-Mail:

    - 815-387-6600
    - info@ingersoll-imc.com

    Tech Support

    Tech
    Support

    For Technical Questions

    Customer Service

    Customer
    Service

    Get General Assistance

  • Log In
Home > Milling > Indexable Milling

Filter Your Results

Applications

Workpiece Material

Grade

Coating

Cutting Dia.

IC

Corner Radius

Cutting Dia. Max.

Depth of Cut Max.

Overall Length

Corner Chamfer

Cutting Edge Angle

Eff. Teeth / Flutes

Hand of Rotation

Back Angle

Number of Indexes

Adaption Machine Side

Included Angle

Insert Hand

Cutting Width

Helix Hand

Insert Seat Size

Coolant

Holder Shape

Slot Width

Button Insert IC

Product Family

Product Categories

Indexable Mills

Milling Inserts

Product Categories

Indexable Mills

Milling Inserts



Photo of Aluminator

Aluminator
15U1G - 90° End Mill for Aluminum

  • Ø1.000-2.000" (Weldon)
  • .41" Depth of cut
  • 11 mm Insert with 4 indexes
  • 15-32 Ra surface finishes when engaging wiper (WEP)
  • Insert corners: .008" .020" .031" .062" .093", .125" R
Photo of Aluminator

Aluminator
15U1G - 90° End Mill for Aluminum

  • Ø1.000-1.500" (M-Adaption)
  • .41" Depth of cut
  • 11 mm Insert with 4 indexes
  • 15-32 Ra surface finishes when engaging wiper (WEP)
  • Insert corners: .008" .020" .031" .062" .093", .125" R
Photo of Aluminator

Aluminator
5H6G - 90° Finish Face Mill for Aluminum

  • Ø2.00-6.00"
  • .41" Depth of cut
  • 11 mm Insert
  • Insert with 4 indexes
  • 15-32 Ra surface finishes when engaging wiper (WEP)
  • Insert corners: .008", .020", .031", .062", .093", .125" R
Photo of Aluminator

Aluminator
SHET11 - Insert for Non-Ferrous

  • Sharp edge & polished rake face for non-ferrous materials
  • Wiper flats on face for producing 15-25 Ra surface finishes
  • 4 Indexes
Photo of Black-Max

Black-Max
19N1A- 45° End Mill

  • Ø1.000-2.000" (Weldon)
  • .31" Max. depth of cut
  • Insert with 4 indexes
  • Power Shear geometry ideally suited for hard materials, weld & interruptions
Photo of Black-Max

Black-Max
9N6A - 45° Face Mill

  • Ø2.00- 6.00"
  • Insert with 4 indexes
  • .31" Max depth of cut
  • Power shear geometry ideally suited for hard materials, weld & interruptions
Photo of Black-Max

Black-Max
LSE324R045-S

  • Milling Insert
Photo of CeraSFeed

CeraSFeed
1ZG3F, End Mill

  • Ceramic Hi-Feed Indexable End Mill
  • Ø1.000-1.500 Diameter
  • 9 MM IC Insert, double sided inserts
  • 4 Cutting edge insert, 4 indexes
  • .060" Max. depth of cut
  • Strong secure clamping
  • Excellent high-feed performance & economy!
Photo of CeraSFeed

CeraSFeed
DG1H*R01, DG2H*R01 (12 mm Insert)

  • Ø2.00-3.00" Ceramic Hi-Feed Face Mill
  • 12 mm IC insert, double sided insert
  • 6 cutting edge insert, 6 indexes
  • .098” Max. depth of cut
  • Strong secure wedge clamp system
  • Excellent high-feed performance & economy!
Photo of CeraSFeed

CeraSFeed
LNXF0905R01, 9 mm IC Ceramic High Feed Insert

  • Ceramic Hi-Feed Insert
  • Ideal for high feed milling of difficult-to-cut materials
  • 4 Indexes
Photo of CeraSFeed

CeraSFeed
TG1Q*R01, TG2Q*R01 (9 mm Insert)

  • Ceramic Hi-Feed Indexable Face Mill
  • 9 mm IC Insert, double sided inserts
  • 4 Cutting edge insert, 4 indexes
  • .060” Max. depth of cut
  • Strong secure dimple clamp system
  • Excellent high-feed performance & economy!
Photo of CeraSFeed

CeraSFeed
TNXN1207N01, 12 mm IC Ceramic High Feed Insert

  • Ceramic Hi-Feed Insert
  • Ideal for high feed milling of difficult-to-cut materials
  • 6 Indexes
Photo of Cougar-Mill

Cougar-Mill
5C2M - 60° Heavy Duty Face Mill

  • Ø4.00-14.00" (RH rotation)
  • .51" Depth of cut
  • 20 mm Insert with 4 indexes
  • Finishes as good as 63 Ra
  • Wedge-held inserts with pocket protection
  • Power shear geometry ideally suited for hard materials, weld & interruptions
Photo of Cougar-Mill

Cougar-Mill
5C2M_L - 60° Heavy Duty Face Mill

  • Ø8.00-14.00" (LH rotation)
  • .51" Depth of cut
  • 20 mm Insert with 4 indexes
  • Finishes as good as 63 Ra
  • Wedge-held inserts with pocket protection
  • Power Shear geometry ideally suited for hard materials, weld & interruptions
Photo of Cougar-Mill

Cougar-Mill
SPEN20_MR General Purpose

  • Milling Insert
Photo of Cougar-Mill

Cougar-Mill
SPKN20_HD Heavy Duty

  • Milling Insert
Photo of Cougar-Mill

Cougar-Mill
ZPKN20_HD Heavy Duty

  • Serrated Milling Insert
Photo of Cougar-Mill-HSHR

Cougar-Mill-HSHR
SEXN_L

  • Milling Insert
Photo of Cougar-Mill-HSHR

Cougar-Mill-HSHR
SEXN_R

  • Milling Insert
Photo of DiFeed-Deka

DiFeed-Deka
PNCQ08_ZNTN - Flat Top Hi-Feed Insert

  • Flat Top with strong edge
  • Ideal for interrupted cuts, mateirals with hard crust and vibration prone conditions
  • 10 indexes
Photo of DiFeed-Deka

DiFeed-Deka
PNCT08 - Positive Hi-Feed Insert

  • Pressed rake face for efficient chip formation
  • 5 indexes
Photo of DiPos-Deka

DiPos-Deka
4W2A - 70° Cartridge Face Mill

  • Ø8.00-12.00"
  • .23" Depth of cut
  • 8 mm Insert with 10 indexes
  • Cartridge pocket protection (sold separatly)
  • Great price-per-edge economy!
Photo of DiPos-Deka

DiPos-Deka
DM2Q - 70° Heavy Duty Face Mill

  • Ø6.00-12.00"
  • .50" Depth of cut
  • 17 mm Insert with 10 indexes
  • Pocket protection with screw-held seat
  • 32-63 Ra surface finishes when engaging the wiper (WEP)
  • Great Price-per-Edge economy!
Photo of DiPos-Deka

DiPos-Deka
DM5G, DM6G - 70° Face Mill

  • Ø1.50-8.00"
  • .23" Depth of cut
  • 8 mm Insert with 10 indexes
  • Finishes as good as 20 Ra when using wiper in one pocket
  • Carbide & SiN options
  • Great price-per-edge economy!
Photo of DiPos-Deka

DiPos-Deka
DM6Q - 70° Heavy Duty Face Mill

  • Ø3.00-8.00"
  • .50" Depth of cut
  • 17 mm Insert with 10 indexes
  • 32-63 Ra surface finishes when engaging the wiper (WEP)
  • Great price-per-edge economy!
Photo of DiPos-Deka

DiPos-Deka
PNCQ08 - Flat Top Insert

  • Flat Top with strong edge
  • Ideal for interrupted cuts, mateirals with hard crust and vibration prone conditions
  • 10 indexes
Photo of DiPos-Deka

DiPos-Deka
PNCQ17 - Flat Top Insert

  • Flat Top with strong edge
  • Ideal for interrupted cuts, mateirals with hard crust and vibration prone conditions
  • 10 indexes
Photo of DiPos-Deka

DiPos-Deka
PNCU08 - Multi-Purpose Insert

  • Pressed rake face geometry promotes efficient chip formation
  • Integrated wiper flat produces surface finishes as good as 32 Ra
  • Designed for multiple materials and facing applications
  • Carbide and SiN options
  • 10 indexes
Photo of DiPos-Deka

DiPos-Deka
PNCU08_GNR - SiN Insert

  • Pressed rake face geometry promotes efficient chip formation
  • Integrated wiper flat produces surface finishes as good as 32 Ra
  • Designed for iron on facing applications
  • 10 indexes
Photo of DiPos-Deka

DiPos-Deka
PNCU08_HS - Insert for SS/Hi-Temps

  • Keen Edge for SS / Hi-Temp / Ti
  • Integrated wiper flat produces surface finishes as good as 32 Ra
  • Pressed rake face geometry promotes efficient chip formation
  • 10 indexes
Photo of DiPos-Deka

DiPos-Deka
PNCU08_P - Insert for Non-Ferrous

  • Sharp edge and polished rake for non-ferrous materials
  • Integrated wiper flat produces 32-63 Ra surface finishes
  • Pressed rake face geometry promotes efficient chip formation
  • 10 indexes
Photo of DiPos-Deka

DiPos-Deka
PNCU08-W - Wiper Insert

  • Long wiper flat produces surface finishes as good as 20 Ra when placed in one pocket
  • Remaining pockets to be loaded with _GNTR or -HS
  • Pressed rake face geometry promotes efficient chip formation
  • Designed for utmost surface finishes on Steel, Iron, SS & Hi-Temps
  • 2 indexes
Photo of DiPos-Deka

DiPos-Deka
PNCU17 - Multi-Purpose Insert

  • Pressed rake face geometry promotes efficient chip formation
  • Integrated wiper flat produces surface finishes as good as 20 Ra
  • Designed for multiple materials and facing applications
  • J hone for light duty cuts
  • E hone for high horse power cuts
  • 10 indexes
Photo of DiPosDuo

DiPosDuo
1TJ1B - 90° & Hi-Feed EM (Metric)

  • Ø10-25mm (M-Adaption)
  • 4mm Insert with 4 indexes
  • 90°: 3.5mm DOC, Hi-Feed: 0.5mm DOC
  • 32-63 Ra surface finishes when engaging the wiper (WEP)
  • Insert corners: 0.2, 0.4, 0.8mm R & Hi-Feed
Photo of DiPosDuo

DiPosDuo
1TJ1B - 90° & Hi-Feed End Mill

  • Ø.500-1.000" (T-Adaption)
  • 4mm Insert with 4 indexes
  • 90°: .14" DOC, Hi-Feed: .019" DOC
  • 32-63 Ra surface finishes when engaging the wiper (WEP)
  • Insert corners: .008" .015" .031" R & Hi-Feed
Photo of DiPosDuo

DiPosDuo
1TJ1B - 90° & Hi-Feed End Mill

  • Ø.500-1.000" (M-Adaption)
  • 4 mm Insert with 4 indexes
  • 90° DOC: 0.14" , Hi-Feed DOC: 0.019"
  • 32-63 Ra surface finishes when engaging the wiper (WEP)
  • Insert corners: .008" .015" .031" R & Hi-Feed
Photo of DiPosDuo

DiPosDuo
1TJ1B - 90° & Hi-Feed End Mill

  • Ø.750-1.500" (Weldon)
  • 4mm Insert with 4 indexes
  • 90°: .14" DOC, Hi-Feed: .019" DOC
  • 32-63 Ra surface finishes when engaging the wiper (WEP)
  • Insert corner: .008" .015" .031" R & Hi-Feed
Photo of DiPosDuo

DiPosDuo
1TJ1B - 90° & Hi-Feed End Mill

  • Ø.500-1.000" (Cyl)
  • 4mm Insert with 4 indexes
  • 90°: .14" DOC, Hi-Feed: .019" DOC
  • 32-63 Ra surface finishes when engaging the wiper (WEP)
  • Insert corners: .008" .015" .031" R & Hi-Feed
Photo of DiPosDuo

DiPosDuo
1TJ1D - 90° Backdraft & Hi-Feed EM

  • Ø.625-1.500" (Weldon)
  • 6 mm Insert with 4 indexes
  • .24" Depth of cut
  • Insert corners: .015" .031" .039" .047" .059" .062".079" R & Hi-Feed
  • 32-63 Ra finishes when using insert with integrated wiper (WEP). 63-125 Ra finishes when using insert with no integrated wiper
  • Backdraft insert option to reduce vibration for long reach applications
Photo of DiPosDuo

DiPosDuo
1TJ1D - 90° Backdraft & Hi-Feed EM

  • Ø.625-1.000" (T-Adaption)
  • 6 mm Insert with 4 indexes
  • .24" Depth of cut
  • Insert corners: .015" .031" .039" .047" .059" .062".079" R & Hi-Feed
  • 32-63 Ra finishes when using insert with integrated wiper (WEP). 63-125 Ra finishes when using insert with no integrated wiper
  • Backdraft insert option to reduce vibration for long reach applications
Photo of DiPosDuo

DiPosDuo
1TJ1D - 90° Backdraft & Hi-Feed EM

  • Ø.625-1.500" (Cylindrical)
  • 6 mm Insert with 4 indexes
  • .24" Depth of cut
  • Insert corners: .015" .031" .039" .047" .059" .062".079" R & Hi-Feed
  • 32-63 Ra finishes when using insert with integrated wiper (WEP). 63-125 Ra finishes when using insert with no integrated wiper
  • Backdraft insert option to reduce vibration for long reach applications
Photo of DiPosDuo

DiPosDuo
1TJ1D - 90° Backdraft & Hi-Feed EM

  • Ø.750-1.500" (M-Adaption)
  • 6 mm Insert with 4 indexes
  • .24" Depth of cut
  • Insert corners: .015" .031" .039" .047" .059" .062".079" R & Hi-Feed
  • 32-63 Ra finishes when using insert with integrated wiper (WEP). 63-125 Ra finishes when using insert with no integrated wiper
  • Backdraft insert option to reduce vibration for long reach applications
Photo of DiPosDuo

DiPosDuo
1TJ1D - 90° B-Draft & Hi-Feed (Metric)

  • Ø16-40mm (M-Adaption)
  • 6 mm Insert with 4 indexes
  • 6mm Depth of Cut
  • Insert corners: 0.4, 0.8, 1.0, 1.2, 1.5, 1.6, 2.0mm R & Hi-Feed
  • 32-63 Ra finishes when using insert with integrated wiper (WEP). 63-125 Ra finishes when using insert with no integrated wiper
  • Backdraft insert option to reduce vibration for long reach applications
Photo of DiPosDuo

DiPosDuo
1TJ1D - 90° B-Draft & Hi-Feed (Metric)

  • Ø16-32mm (Weldon)
  • 6 mm Insert with 4 indexes
  • 6mm Depth of Cut
  • Insert corners: 0.4, 0.8, 1.0, 1.2, 1.5, 1.6, 2.0mm R & Hi-Feed
  • 32-63 Ra finishes when using insert with integrated wiper (WEP). 63-125 Ra finishes when using insert with no integrated wiper
  • Backdraft insert option to reduce vibration for long reach applications
Photo of DiPosDuo

DiPosDuo
1TJ1D - 90° B-Draft & Hi-Feed (Metric)

  • Ø16-25mm (T-Adaption)
  • 6 mm Insert with 4 indexes
  • 6mm Depth of cut
  • Insert corners: 0.4, 0.8, 1.0, 1.2, 1.5, 1.6, 2.0mm R & Hi-Feed
  • 32-63 Ra finishes when using insert with integrated wiper (WEP). 63-125 Ra finishes when using insert with no integrated wiper
  • Backdraft insert option to reduce vibration for long reach applications
Photo of DiPosDuo

DiPosDuo
1TJ1D - 90° End Mill for Knee Mills

  • Ø2.50-3.00" (R8)
  • 6 mm Insert with 4 indexes
  • .24" Depth of cut
  • Insert corners: .015" .031" .039" .047" .059" .062".079" R & Hi-Feed
  • 32-63 Ra finishes when using insert with integrated wiper (WEP). 63-125 Ra finishes when using insert with no integrated wiper
Photo of DiPosDuo

DiPosDuo
1TJ1D - 90° End Mill for Knee Mills

  • Ø1.00-2.00" (Cylindrical)
  • 6 mm Insert with 4 indexes
  • .24" Depth of cut
  • Insert corners: .015" .031" .039" .047" .059" .062".079" R & Hi-Feed
  • 32-63 Ra finishes when using insert with integrated wiper (WEP). 63-125 Ra finishes when using insert with no integrated wiper
Photo of DiPosDuo

DiPosDuo
1TJ1F - 90° & Hi-Feed EM (Metric)

  • Ø20-40mm (M-Adaption)
  • 9mm Insert with 4 indexes
  • 90°: 8mm DOC, Hi-Feed: 1.5mm DOC
  • Insert corners: 0.4, 0.8, 1.6mm R & Hi-Feed
  • 32-63 Ra finishes when using insert with integrated wiper (WEP).
  • 63-125 Ra finishes when using insert with no integrated wiper
Photo of DiPosDuo

DiPosDuo
1TJ1F - 90° & Hi-Feed EM (Metric)

  • Ø20-32mm (Weldon)
  • 9mm Insert with 4 indexes
  • 90°: 8mm DOC, Hi-Feed: 1.5mm DOC
  • Insert corners: 0.4, 0.8, 1.6mm R & Hi-Feed
  • 32-63 Ra finishes when using insert with integrated wiper (WEP)
  • 63-125 Ra finishes when using insert with no integrated wiper
Photo of DiPosDuo

DiPosDuo
1TJ1F - 90° & Hi-Feed End Mill

  • Ø1.000-1.500" (Cylindrical)
  • 9mm Insert with 4 indexes
  • 90°: .32" DOC, Hi-Feed: .059" DOC
  • Insert corners: .015" .031" .062" R & Hi-Feed
  • 32-63 Ra finishes when using insert with integrated wiper (WEP).
  • 63-125 Ra finishes when using insert with no integrated wiper
Photo of DiPosDuo

DiPosDuo
1TJ1F - 90° & Hi-Feed End Mill

  • Ø1.000-1.500" (M-Adaption)
  • 9mm Insert with 4 indexes
  • 90°: .32" DOC, Hi-Feed: .059" DOC
  • Insert corners: .015" .031" .062" R & Hi-Feed
  • 32-63 Ra finishes when using insert with integrated wiper (WEP).
  • 63-125 Ra finishes when using insert with no integrated wiper
Photo of DiPosDuo

DiPosDuo
1TJ1F - 90° & Hi-Feed End Mill

  • Ø1.000-1.500" (Weldon)
  • 9mm Insert with 4 indexes
  • 90°: .32" DOC, Hi-Feed: .059" DOC
  • Insert corners: .015", .031", .062" R & Hi-Feed
  • 32-63 Ra finishes when using insert with integrated wiper (WEP)
  • 63-125 Ra finishes when using insert with no integrated wiper
Photo of DiPosDuo

DiPosDuo
1TJ1G - 90° & Hi-Feed EM (Metric)

  • Ø25-40mm (M-Adaption)
  • 11mm Insert with 4 indexes
  • 90°: 10.5mm DOC, Hi-Feed: 2.0mm DOC
  • Insert corners: 0.8mm R & Hi-Feed
  • 32-63 Ra finishes when using insert with integrated wiper (WEP)
  • 63-125 Ra finishes when using insert with no integrated wiper
Photo of DiPosDuo

DiPosDuo
1TJ1G - 90° & Hi-Feed EM (Metric)

  • Ø25-32mm (Weldon)
  • 11mm Insert with 4 indexes
  • 90°: 10.5mm DOC, Hi-Feed: 2mm DOC
  • Insert corners: 0.8mm R & Hi-Feed
  • 32-63 Ra finishes when using insert with integrated wiper (WEP)
  • 63-125 Ra finishes when using insert with no integrated wiper
Photo of DiPosDuo

DiPosDuo
1TJ1G - 90° & Hi-Feed End Mill

  • Ø1.000-1.500" (Weldon)
  • 11mm Insert with 4 indexes
  • 90°: .41" DOC, Hi-Feed: .078" DOC
  • Insert corners: .031" R & Hi-Feed
  • 32-63 Ra finishes when using insert with integrated wiper (WEP)
  • 63-125 Ra finishes when using insert with no integrated wiper
Photo of DiPosDuo

DiPosDuo
1TJ1G - 90° & Hi-Feed End Mill

  • Ø1.000-1.500" (M-Adaption)
  • 11mm Insert with 4 indexes
  • 90°: .41" DOC, Hi-Feed: .078" DOC
  • Insert corners: .031" R & Hi-Feed
  • 32-63 Ra finishes when using insert with integrated wiper (WEP)
  • 63-125 Ra finishes when using insert with no integrated wiper
Photo of DiPosDuo

DiPosDuo
1TJ1J - 90° & Hi-Feed End Mill

  • Ø1.250-1.500" (M-Adaption)
  • 14mm Insert with 4 indexes
  • 90°: .54" DOC, Hi-Feed: .118" DOC
  • Insert corners: .031" R & Hi-Feed
  • 32-63 Ra finishes when using insert with integrated wiper (WEP)
  • 63-125 Ra finishes when using insert with no integrated wiper
Photo of DiPosDuo

DiPosDuo
1TJ1J - 90° & Hi-Feed End Mill

  • Ø1.250-1.500" (Weldon)
  • 14mm Insert with 4 indexes
  • 90°: .54" DOC, Hi-Feed: .118" DOC
  • Insert corners: .031" R & Hi-Feed
  • 32-63 Ra finishes when using insert with integrated wiper (WEP)
  • 63-125 Ra finishes when using insert with no integrated wiper
Photo of DiPosDuo

DiPosDuo
1TV1D - Modular Backdraft End Mill

  • Ø.625-1.000" (T-Adaption)
  • 6 mm Insert with 4 indexes
  • Backdraft with single point diameter contact lowers radial forces, ideal for long reach side wall finishing
  • Insert corners: .015", .031", .047", .062" & .079" R
Photo of DiPosDuo

DiPosDuo
MNCU06_P - Insert for Alum, Face Wiper

  • Pressed rake face geometry promotes efficient chip formation
  • Sharp edge & polished rake face for non-ferrous materials
  • Integrated wiper flat on face for producing 32-63 Ra surface finishes
  • To be loaded in all pockets of the cutter
  • 4 Indexes
Photo of DiPosDuo

DiPosDuo
MNCU09_AL - Insert for Alum, Face Wiper

  • Pressed rake face geometry promotes efficient chip formation
  • Sharp edge & polished rake face for non-ferrous materials
  • Integrated wiper flat on face for producing 32-63 Ra surface finishes
  • 4 Indexes
Photo of DiPosDuo

DiPosDuo
MNCU11_AL - Insert for Alum, Face Wiper

  • Pressed rake face geometry promotes efficient chip formation
  • Sharp edge & polished rake face for non-ferrous materials
  • Integrated wiper flat on face for producing 32-63 Ra surface finishes
  • 4 Indexes
Photo of DiPosDuo

DiPosDuo
MNCU14_AL - Insert for Alum, Face Wiper

  • Pressed rake face geometry promotes efficient chip formation
  • Sharp edge & polished rake face for non-ferrous materials
  • Integrated wiper flat on face for producing 32-63 Ra surface finishes
  • 4 Indexes
Photo of DiPosDuo

DiPosDuo
MNHU04_M - Multi-Purpose Insert

  • Pressed rake face geometry promotes efficient chip formation
  • Designed for multiple materials and applications
  • 4 Indexes
Photo of DiPosDuo

DiPosDuo
MNHU06 - Multi-Purpose Insert

  • Pressed rake face geometry promotes efficient chip formation
  • Designed for multiple materials and applications
  • 4 Indexes
Photo of DiPosDuo

DiPosDuo
MNHU06_HW - SS/Hi-Temp/Ti, Face Wiper

  • Pressed rake face geometry promotes efficient chip formation
  • Integrated wiper flat on face for producing 32-63 Ra surface finishes
  • To be loaded in all pockets of the cutter
  • 4 Indexes
Photo of DiPosDuo

DiPosDuo
MNHU06_PH - Insert for SS/Hi-Temp/Ti

  • Keen edge for SS/Hi-Temp/Ti
  • Pressed rake face geometry promotes efficient chip formation
  • 4 Indexes
Photo of DiPosDuo

DiPosDuo
MNHU06_SW - Backdraft, OD Wiper

  • Pressed rake face geometry promotes efficient chip formation.
  • Integrated wiper flat on OD for producing superior surface finishes.
  • Backdrafted to minimize radial forces in long reach applications
  • Ideal for finishing hardened steel > Rc 50
  • 4 Indexes
Photo of DiPosDuo

DiPosDuo
MNHU09_M - Multi-Purpose Insert

  • Pressed rake face geometry promotes efficient chip formation
  • Designed for multiple materials and applications
  • 4 Indexes
Photo of DiPosDuo

DiPosDuo
MNHU09_ML - SS/Hi-Temp/Ti, Face Wiper

  • Keen edge for SS/Hi-Temp/Ti
  • Pressed rake face geometry promotes efficient chip formation
  • Integrated wiper flat on face for producing surface finishes as good as 40 Ra
  • 4 Indexes
Photo of DiPosDuo

DiPosDuo
MNHU11_M - Multi-Purpose Insert

  • Pressed rake face geometry promotes efficient chip formation
  • Designed for multiple materials and applications
  • 4 Indexes
Photo of DiPosDuo

DiPosDuo
MNHU11_PNR-M - Multi-Purpose/Face Wiper

  • Pressed rake face geometry promotes efficient chip formation
  • Integrated wiper flat on face for producing surface finishes as good as 32 Ra
  • Designed for multiple materials and applications
  • 4 Indexes
Photo of DiPosDuo

DiPosDuo
MNHU14_M - Multi-Purpose Insert

  • Pressed rake face geometry promotes efficient chip formation
  • Designed for multiple materials and applications
  • 4 Indexes
Photo of DiPosDuo

DiPosDuo
MNHU14_PNR-M - Multi-Purpose/Face Wiper

  • Pressed rake face geometry promotes efficient chip formation
  • Integrated wiper flat on face for producing surface finishes as good as 32 Ra
  • Designed for multiple materials and applications
  • 4 Indexes
Photo of DiPosDuo

DiPosDuo
TJ1D - 90° Backdraft & Hi-Feed FM

  • Ø1.50-3.00"
  • 6 mm Insert with 4 indexes
  • .24" Depth of cut
  • Insert corners: .015" .031" .039" .047" .059" .062".079" R & Hi-Feed
  • 32-63 Ra finishes when using insert with integrated wiper (WEP). 63-125 Ra finishes when using insert with no integrated wiper
  • Backdraft insert option to reduce vibration for long reach applications
Photo of DiPosDuo

DiPosDuo
TJ1D - 90° B-Draft & Hi-Feed (Metric)

  • Ø32-63mm
  • 6 mm Insert with 4 indexes
  • 6mm Depth of cut
  • Insert corners: 0.4, 0.8, 1.0, 1.2, 1.5, 1.6, 2.0mm R & Hi-Feed
  • 32-63 Ra finishes when using insert with integrated wiper (WEP). 63-125 Ra finishes when using insert with no integrated wiper
  • Backdraft insert option to reduce vibration for long reach applications
Photo of DiPosDuo

DiPosDuo
TJ5F - 90° & Hi-Feed FM (Metric)

  • Ø40-80mm
  • 9mm Insert with 4 indexes
  • 90°: 8mm DOC, Hi-Feed: 1.5mm DOC
  • Insert corners: 0.4, 0.8, 1.6mm R & Hi-Feed
  • 32-63 Ra finishes when using insert with integrated wiper (WEP). 63-125 Ra finishes when using insert with no integrated wiper
Photo of DiPosDuo

DiPosDuo
TJ5G TJ6G - 90° & Hi-Feed Face Mill

  • Ø2.00-4.00"
  • 11mm Insert with 4 indexes
  • 90°: .41" DOC, Hi-Feed: .078" DOC
  • Insert corners: .031" R & Hi-Feed
  • 32-63 Ra finishes when using insert with integrated wiper (WEP). 63-125 Ra finishes when using insert with no integrated wiper
Photo of DiPosDuo

DiPosDuo
TJ5G TJ6G - 90° & Hi-Feed FM (Metric)

  • Ø40-100mm
  • 11mm Insert with 4 indexes
  • 90°: 10.5mm DOC, Hi-Feed: 2.0mm DOC
  • Insert corners: 0.8mm R & Hi-Feed
  • 32-63 Ra finishes when using insert with integrated wiper (WEP). 63-125 Ra finishes when using insert with no integrated wiper
Photo of DiPosDuo

DiPosDuo
TJ5J TJ6J - 90° & Hi-Feed Face Mill

  • Ø2.00-4.00"
  • 14 mm Insert with 4 indexes
  • 90°: .54" DOC, Hi-Feed: .118" DOC
  • Insert corners: .031" R & Hi-Feed
  • 32-63 Ra finishes when using insert with integrated wiper (WEP). 63-125 Ra finishes when using insert with no integrated wiper
Photo of DiPosDuo

DiPosDuo
TJ5J TJ6J - 90° & Hi-Feed FM (Metric)

  • Ø50-125 mm
  • 14 mm Insert with 4 indexes
  • 90° Depth of Cut: 13.8 mm
  • Hi-Feed Depth of Cut: 3.0 mm
  • Insert corners: 0.8 mm R & Hi-Feed
  • 32-63 Ra finishes when using insert with integrated wiper (WEP). 63-125 Ra finishes when using insert with no integrated wiper
Photo of DiPosDuo

DiPosDuo
TJ6F - 90° & Hi-Feed Face Mill

  • Ø1.50-4.00"
  • 9mm Insert with 4 indexes
  • 90°: .32" DOC, Hi-Feed: .059" DOC
  • Insert corners: .015" .031" 062" R & Hi-Feed
  • 32-63 Ra finishes when using insert with integrated wiper (WEP). 63-125 Ra finishes when using insert with no integrated wiper
Photo of DiPosDuo

DiPosDuo
UNHU04_HF - Hi-Feed Insert

  • Insert fits same MNHU04 pocket for Hi-Feed milling applications
  • Pressed rake face geometry promotes efficient chip formation
  • Designed for multiple materials and applications
  • 4 Indexes
Photo of DiPosDuo

DiPosDuo
UNHU06_HF - Hi-Feed Insert

  • Insert fits same MNHU06 pocket for Hi-Feed milling applications
  • Pressed rake face geometry promotes efficient chip formation
  • Designed for multiple materials and applications
  • 4 Indexes
Photo of DiPosDuo

DiPosDuo
UNHU09_HF - Hi-Feed Insert

  • Insert fits same MNHU09 pocket for Hi-Feed milling applications
  • Pressed rake face geometry promotes efficient chip formation
  • Designed for multiple materials and applications
  • 4 Indexes
Photo of DiPosDuo

DiPosDuo
UNHU11_HF - Hi-Feed Insert

  • Insert fits same MNHU11 pocket for Hi-Feed milling applications
  • Pressed rake face geometry promotes efficient chip formation
  • Designed for multiple materials and applications
  • 4 Indexes
Photo of DiPosDuo

DiPosDuo
UNHU14_HF - Hi-Feed Insert

  • Insert fits same MNHU14 pocket for Hi-Feed milling applications
  • Pressed rake face geometry promotes efficient chip formation
  • Designed for multiple materials and applications
  • 4 Indexes
Photo of DiPosFeed

DiPosFeed
1TG1B Hi-Feed End Mill

  • Ø.312-1.000”
  • 4 mm IC Insert with 4 indexes
  • .5 mm (.020") Max. depth of cut
  • Two different insert edge preparations provide application flexibility
  • Excellent high-feed performance & economy!
Photo of DiPosFeed

DiPosFeed
1TG1B Hi-Feed End Mill (Metric)

  • Ø10 mm - 25 mm
  • 4 mm IC Insert with 4 indexes
  • .5 mm (.020") Max. depth of cut
  • Two different insert edge preparations provide application flexibility
  • Excellent high-feed performance & economy!
Photo of DiPosFeed

DiPosFeed
1TG1B Modular Hi-Feed End Mill

  • Ø.394-1.00" (T-Adaption)
  • 4 mm IC Insert with 4 indexes
  • .5 mm (.020") Max. depth of cut
  • Two different insert edge preparations provide application flexibility
  • Excellent high feed performance & economy!
Photo of DiPosFeed

DiPosFeed
1TG1B Modular Hi-Feed End Mill (Metric)

  • Ø10 mm - 25 mm (T-Adaption)
  • 4 mm IC Insert with 4 indexes
  • .5 mm (.020") Max. depth of cut
  • Two different insert edge preparations provide application flexibility
  • Excellent high feed performance & economy!
Photo of DiPosFeed

DiPosFeed
1TG1B TopOn Hi-Feed End Mill

  • Ø.394-1.250”
  • 4 mm IC Insert with 4 indexes
  • .5 mm (.020") Max. depth of cut
  • Two different insert edge preparations provide application flexibility
  • Excellent high feed performance & economy!
Photo of DiPosFeed

DiPosFeed
1TG1B TopOn Hi-Feed End Mill (Metric)

  • Ø10 mm - 32 mm
  • 4 mm IC Insert with 4 indexes
  • .5 mm (.020") Max. depth of cut
  • Two different insert edge preparations provide application flexibility
  • Excellent high feed performance & economy!
Photo of DiPosFeed

DiPosFeed
1TG1F - Modular Hi Feed End Mill

  • Ø.62-1.00" (T-Adaption)
  • 6 mm IC Insert with 4 indexes
  • .040" Max. depth of cut
  • Three different insert edge preparations provide application flexibility
  • Excellent high-feed performance & economy
Photo of DiPosFeed

DiPosFeed
1TG1F TopOn Style

  • Ø.625-1.500”
  • 6 mm IC Insert with 4 indexes
  • .040" Max. depth of cut
  • Three different insert edge preparations provide application flexibility
  • Excellent high-feed performance & economy!
Photo of DiPosFeed

DiPosFeed
1TG1F TopOn Style (Metric)

  • Ø16-30 mm
  • 6 mm IC Insert with 4 indexes
  • .040" Max. depth of cut
  • Three different insert edge preparations provide application flexibility
  • Excellent high feed performance & economy!
Photo of DiPosFeed

DiPosFeed
1TG1F, End Mills

  • Ø.625-1.250”
  • .040" Max. depth of cut
  • 6 mm IC Insert with 4 indexes
  • Three different insert edge preparations provide application flexibility
  • Excellent high-feed performance & economy!
Photo of DiPosFeed

DiPosFeed
1TG1F, End Mills (Metric)

  • Ø16-30 mm
  • 6 mm IC Insert with 4 indexes
  • .040" Max. depth of cut
  • Three different insert edge preparations provide application flexibility
  • Excellent high-feed performance & economy!
Photo of DiPosFeed

DiPosFeed
1TG1F, End Mills (Weldon)

  • Ø1.25-1.500”
  • .040" Max. depth of cut
  • 6 mm IC Insert with 4 indexes
  • Three different insert edge preparations provide application flexibility
  • Excellent high-feed performance & economy!
Photo of DiPosFeed

DiPosFeed
1TG1G TopOn Style

  • Ø1.00-1.500”
  • 9 mm IC Insert with 4 indexes
  • 1.5 mm (.059") Max. depth of cut
  • Three different insert edge preparations provide application flexibility
  • Excellent high feed performance & economy!
Photo of DiPosFeed

DiPosFeed
1TG1G TopOn Style (Metric)

  • Ø25-35 mm
  • 9 mm IC Insert with 4 indexes
  • 1.5 mm (.059") Max. depth of cut
  • Three different insert edge preparations provide application flexibility
  • Excellent high feed performance & economy!
Photo of DiPosFeed

DiPosFeed
1TG1G, End Mills

  • Ø1.000”
  • 9 mm IC Insert with 4 indexes
  • 1.5 mm (.059") Max. depth of cut
  • Three different insert edge preparations provide application flexibility.
  • Excellent high feed performance & economy!
Photo of DiPosFeed

DiPosFeed
1TG1G, End Mills (Metric)

  • Ø25-32 mm
  • 9 mm IC Insert with 4 indexes
  • 1.5 mm (.059") Max. depth of cut
  • Three different insert edge preparations provide application flexibility.
  • Excellent high feed performance & economy!
Photo of DiPosFeed

DiPosFeed
1TG1G, End Mills (Weldon)

  • Ø1.250-1.500”
  • 9 mm IC Insert with 4 indexes
  • 1.5 mm (.059") Max. depth of cut
  • Three different insert edge preparations provide application flexibility
  • Excellent high-feed performance & economy!
Photo of DiPosFeed

DiPosFeed
1TG1J, End Mills (Weldon)

  • Ø1.250 - 1.50”
  • 11 mm IC Insert with 4 indexes
  • 2 mm (.078") Max. depth of cut
  • Two different insert edge preparations provide application flexibility
  • Excellent high-feed performance & economy!
Photo of DiPosFeed

DiPosFeed
1TG1J, TopOn Style

  • Ø1.250 - 1.500”
  • 11 mm IC Insert with 4 indexes
  • 2 mm (.078") Max. depth of cut
  • Two different insert edge preparations provide application flexibility
  • Excellent high-feed performance & economy!
Photo of DiPosFeed

DiPosFeed
1TG1J, TopOn Style (Metric)

  • Ø30 mm - 42 mm
  • 11 mm IC Insert with 4 indexes
  • 2 mm (.078") Max. depth of cut
  • Two different insert edge preparations provide application flexibility
  • Excellent high-feed performance & economy!
Photo of DiPosFeed

DiPosFeed
TG1F Hi-Feed Face Mill

  • Ø2.00”
  • 1 mm (.039") Max. depth of cut
  • 6 mm IC insert with 4 indexes
  • Three different insert edge preparations provide application flexibility
  • Excellent hi-feed performance & economy!
Photo of DiPosFeed

DiPosFeed
TG1F Hi-Feed Face Mill (Metric)

  • Ø40-63 mm
  • Max. depth of cut: 1 mm (.039")
  • 06 mm IC insert with 4 indexes
  • Three different insert edge preparations provide application flexibility
  • Excellent hi-feed performance & economy!
Photo of DiPosFeed

DiPosFeed
TG1G,TG2G Face Mill

  • Ø2.00-3.00”
  • 1.5 mm (.059") Max. depth of cut
  • 9 mm IC Insert with 4 indexes
  • Three different insert edge preparations provide application flexibility
  • Excellent hi-feed performance & economy!
Photo of DiPosFeed

DiPosFeed
TG1G,TG2G,TG3G,TG4G Face Mill (Metric)

  • Ø40-80 mm
  • 1.5 mm (.059") Max. depth of cut
  • 9 mm IC Insert with 4 indexes
  • Three different insert edge preparations provide application flexibility
  • Excellent hi-feed performance & economy!
Photo of DiPosFeed

DiPosFeed
TG1J, TG2J Face Mill

  • Ø2.00-4.00”
  • 11 mm IC Insert with 4 indexes
  • 2.0 mm (.078") Max. depth of cut
  • Three different insert edge preparations provide application flexibility
  • Excellent hi-feed performance & economy!
Photo of DiPosFeed

DiPosFeed
TG1J, TG2J Face Mill (Metric)

  • Ø50-100 mm
  • 11 mm IC Insert with 4 indexes
  • 2.0 mm (.078") Max. depth of cut
  • Three different insert edge preparations provide application flexibility
  • Excellent hi-feed performance & economy!
Photo of DiPosFeed

DiPosFeed
UNLU0402M0TR, 4 mm IC Hi-Feed Insert

  • Multi-Purpose
  • Ideal for ferrous materials
  • 4 Indexes
Photo of DiPosFeed

DiPosFeed
UNLU0402M0TR-ML, 4 mm IC Hi-Feed Insert

  • Multi-Purpose
  • Ideal for ferrous materials
  • 4 Indexes
Photo of DiPosFeed

DiPosFeed
UNLU0603M0TR, 6 mm IC Hi-Feed Insert

  • Multi-Purpose
  • Ideal for ferrous materials
  • 8 Indexes
Photo of DiPosFeed

DiPosFeed
UNLU0603M0TR-ML, 6 mm IC Hi-Feed Insert

  • High-Positive - Keen Edge
  • Ideal for ferrous materials
  • 4 Indexes
Photo of DiPosFeed

DiPosFeed
UNLU0603M0TR-MM, 6 mm IC Hi-Feed Insert

  • Multi-Purpose - Keen Edge
  • Ideal for ferrous materials
  • 4 Indexes
Photo of DiPosFeed

DiPosFeed
UNLU0904M0TR, 9 mm IC Hi-Feed Insert

  • Multi-Purpose
  • Ideal for ferrous materials
  • 4 Indexes
Photo of DiPosFeed

DiPosFeed
UNLU0904M0TR-ML, 9 mm IC Hi-Feed Insert

  • Multi-Purpose - Keen Edge
  • Ideal for ferrous materials
  • 4 Indexes
Photo of DiPosFeed

DiPosFeed
UNLU0904M0TR-MM, 9 mm IC Hi-Feed Insert

  • Multi-Purpose - Keen Edge
  • Ideal for ferrous materials
  • 4 Indexes
Photo of DiPosFeed

DiPosFeed
UNLU1105M0TR, 11 mm IC Hi-Feed Insert

  • Multi-Purpose
  • Ideal for ferrous materials
  • 4 Indexes
Photo of DiPosFeed

DiPosFeed
UNLU1105M0TR-ML, 11 mm IC Hi-Feed Insert

  • Multi-Purpose
  • Ideal for ferrous materials
  • 4 Indexes
Photo of DiPosFinishT

DiPosFinishT
ANED12_AL - Insert for non-ferrous

  • Pressed rake face geometry promotes efficient chip evacuation
  • Crowned wiper produces surface finishes as good as 3 Ra
  • Sharp & polished for aluminum & other non-ferrous materials
  • 4 Indexes
Photo of DiPosFinishT

DiPosFinishT
ANED12_CBN - CBN Tipped Insert

  • Positive rake face geometry promotes efficient chip evacuation
  • Crowned wiper produces surface finishes as good as 3 Ra
  • 1 Index
Photo of DiPosFinishT

DiPosFinishT
ANED12_ML - Multi-Purpose Insert

  • Pressed rake face geometry promotes efficient chip evacuation
  • Crowned wiper produces surface finishes as good as 3 Ra
  • Designed for multiple materials and applications
  • 4 Indexes
Photo of DiPosFinishT

DiPosFinishT
ANED12_PCD - PCD Tipped Insert

  • Positive rake face geometry promotes efficient chip evacuation
  • Crowned wiper produces surface finishes as good as 3 Ra
  • 1 Index
Photo of DiPosFinishT

DiPosFinishT
TA3Q - Fixed Pocket Finish Face Mill

  • Ø2.00-6.00"
  • 12 mm Insert with up to 4 indexes
  • .020" Max. depth of cut (.012" Min. depth of cut)
  • Non-adjusting design reduces set up time
  • Long crowned wiper produces 3-15 Ra surface finish
  • Stepped insert orientation alleviates axial & radial forces
  • Can mill up to 90° shoulder
  • Carbide, CBN & PCD insert offering for a wide variety of materials
Photo of DiPos-Hexa

DiPos-Hexa
HN5D, HN6D - 45° Face Mill

  • Ø1.50-6.00"
  • .11" Depth of cut
  • 6 mm Insert with 12 indexes
  • 32-63 Ra surface finishes
  • Great price-per-edge economy!
Photo of DiPos-Hexa

DiPos-Hexa
HN5D, HN6D - 45° Face Mill (Metric)

  • Ø40-160 mm
  • 3 mm Depth of cut
  • 6 mm Insert with 12 indexes
  • 32-63 Ra surface finishes
  • Great price-per-edge economy!
Photo of DiPos-Hexa

DiPos-Hexa
HN5G, HN6G - 45° Face Mill

  • Ø2.50-10.00"
  • .20" Depth of cut
  • 10mm Insert with 12 indexes
  • 32-63 Ra surface finishes
  • Great price-per-edge economy!
Photo of DiPos-Hexa

DiPos-Hexa
HN5G, HN6G - 45° Face Mill (Metric)

  • Ø63-250mm
  • 5mm Depth of cut
  • 10mm Insert with 12 indexes
  • 32-63 Ra surface finishes
  • Great price-per-edge economy!
Photo of DiPos-Hexa

DiPos-Hexa
HNGU06_M - Medium Roughing Insert

  • Pressed rake face geometry promotes efficient chip formation
  • Integrated wiper flats
  • Designed for multiple materials and applications
  • 12 indexes
Photo of DiPos-Hexa

DiPos-Hexa
HNGU06_MM - Medium Positive Insert

  • Pressed rake face geometry promotes efficient chip formation
  • Integrated wiper flats
  • Extra positive rake face geometry
  • 12 indexes
Photo of DiPos-Hexa

DiPos-Hexa
HNGU10_HR - Heavy Roughing Insert

  • Pressed rake face geometry promotes efficient chip formation
  • Integrated wiper flats
  • Integrated wiper
  • Strengthened Edge for abusive conditions & aggressive chiploads
  • 12 indexes
Photo of DiPos-Hexa

DiPos-Hexa
HNGU10_M - Medium Roughing Insert

  • Pressed rake face geometry promotes efficient chip formation
  • Integrated wiper flats
  • Integrated wiper
  • Designed for multiple materials and applications
  • 12 indexes
Photo of DiPos-Hexa

DiPos-Hexa
HNGU10_MM - Medium Positive Insert

  • Pressed rake face geometry promotes efficient chip formation
  • Integrated wiper flats
  • Integrated wiper
  • Extra positive rake face geometry
  • 12 indexes
Photo of DiPosPenta

DiPosPenta
1DP1C - Hi-Feed End Mill

  • Ø.750-1.500" (M-Adaption)
  • .059" Depth of cut
  • 5mm Insert with 10 indexes
  • Same insert fits Hi-Feed & 65° MIlls
  • Positive rake and reinforced edge offer low cutting forces and smooth machining in deep cavities
  • High ramping capability
  • Great price-per-edge economy!
Photo of DiPosPenta

DiPosPenta
1DP1C - Hi-Feed End Mill

  • Ø.750-1.500" (Cylindrical)
  • .059" Depth of cut
  • 5mm Insert with 10 indexes
  • Same insert fits Hi-Feed & 65° MIlls
  • Positive rake and reinforced edge offer low cutting forces and smooth machining in deep cavities
  • High ramping capability
  • Great price-per-edge economy!
Photo of DiPosPenta

DiPosPenta
1DP1P - Hi-Feed End Mill

  • Ø1.500" (Cylindrical)
  • .11" Depth of cut
  • 10mm Insert with 10 indexes
  • Same insert fits Hi-Feed & 65° MIlls
  • Positive rake and reinforced edge offer low cutting forces and smooth machining in deep cavities
  • High ramping capability
  • Great price-per-edge economy!
Photo of DiPosPenta

DiPosPenta
1DP1P - Hi-Feed End Mill

  • Ø1.500" (M-Adaption)
  • .11" Depth of cut
  • 10mm Insert with 10 indexes
  • Same insert fits Hi-Feed & 65° MIlls
  • Positive rake and reinforced edge offer low cutting forces and smooth machining in deep cavities
  • High ramping capability
  • Great price-per-edge economy!
Photo of DiPosPenta

DiPosPenta
DM6C - 65° Face Mill

  • Ø1.50-3.00"
  • .13" Depth of cut
  • 5mm Insert with 10 indexes
  • Same insert fits Hi-Feed & 65° MIlls
  • Positive rake and reinforced edge offer low cutting forces and smooth machining
  • Great price-per-edge economy!
Photo of DiPosPenta

DiPosPenta
DM6P - 65° Face Mill

  • Ø2.00-4.00"
  • .25" Depth of cut
  • 10mm Insert with 10 indexes
  • Same insert fits Hi-Feed & 65° MIlls
  • 63-125 Ra surface finishes
  • Positive rake and reinforced edge offer low cutting forces and smooth machining
  • Great price-per-edge economy!
Photo of DiPosPenta

DiPosPenta
DP6C - Hi-Feed Face Mill

  • Ø1.50-2.50"
  • .059" Depth of cut
  • 5mm Insert with 10 indexes
  • Same insert fits Hi-Feed & 65° MIlls
  • Positive rake and reinforced edge offer low cutting forces and smooth machining in deep cavities
  • High ramping capability
  • Great price-per-edge economy!
Photo of DiPosPenta

DiPosPenta
DP6P - Hi-Feed Face Mill

  • Ø2.00-3.00"
  • .11" Depth of cut
  • 10mm Insert with 10 indexes
  • Same insert fits Hi-Feed & 65° MIlls
  • Positive rake and reinforced edge offer low cutting forces and smooth machining in deep cavities
  • High ramping capability
  • Great price-per-edge economy!
Photo of DiPosPenta

DiPosPenta
PNCU05_M - Multi-Purpose Insert

  • Reinforced Cutting Edge
  • Positive rake face for efficient chip evacuation and smooth cutting
  • 10 indexes
Photo of DiPosPenta

DiPosPenta
PNCU10_M - Multi-Purpose Insert

  • Reinforced Cutting Edge
  • Positive rake face for efficient chip evacuation and smooth cutting
  • 10 indexes
Photo of DiPosQuad

DiPosQuad
1DJ1E - 90° Modular EM (Metric)

  • Ø16-40mm (M-Adaption)
  • 5mm Depth of cut
  • 7mm Insert with 8 indexes
  • 15-32 Ra surface finishes when engaging the wiper (WEP)
  • Great Price-per-Edge economy!
  • Insert corner: .031" R
Photo of DiPosQuad

DiPosQuad
1DJ1E - 90° Rough & Finish EM (Metric)

  • Ø16-32mm (Weldon)
  • 5mm Depth of cut
  • 7mm Insert with 8 indexes
  • 15-32 Ra surface finishes when engaging the wiper (WEP)
  • Great Price-per-Edge economy!
  • Insert corner: .031" R
Photo of DiPosQuad

DiPosQuad
1DJ1E - 90° Rough & Finish End Mill

  • Ø.625-1.500" (Weldon)
  • .19" Depth of cut
  • 7mm Insert with 8 indexes
  • 15-32 Ra surface finishes when engaging the wiper (WEP)
  • Great Price-per-Edge economy!
  • Insert corner: .031" R
Photo of DiPosQuad

DiPosQuad
DJ5E - 90° Rough & Finish FM (Metric)

  • Ø32-50mm
  • 5mm Depth of cut
  • 7mm Insert with 8 indexes
  • 15-32 Ra surface finishes when engaging the wiper (WEP)
  • Insert corners: .031" R
Photo of DiPosQuad

DiPosQuad
DJ5E, DJ6E - 90° Rough & Finish Face Mill

  • Ø1.50-3.00"
  • .19" Depth of cut
  • 7mm Insert with 8 indexes
  • 15-32 Ra surface finishes when engaging the wiper (WEP)
  • Insert corners: .031" R
Photo of DiPosQuad

DiPosQuad
DJ5G, DJ6G - 90° Face Mill

  • Ø2.00-6.00"
  • .33" Depth of cut
  • 12mm Insert with 8 indexes
  • 32-63 Ra surface finishes when engaging the wiper (WEP)
  • Insert corners: .031" R
Photo of DiPosQuad

DiPosQuad
SQGU07_M - Multi-Purpose Insert

  • Pressed rake face geometry promotes efficient chip formation
  • Integrated wiper flats
  • Insert Corner: .031" R
  • 8 indexes
Photo of DiPosQuad

DiPosQuad
SQGU12_MM - Medium Positive Insert

  • Pressed rake face geometry promotes efficient chip formation
  • Integrated wiper flats
  • Insert Corner: .031" R
  • Strengthened Edge for abusive conditions & aggressive chiploads
  • 8 indexes