Series: 12J1G - 90° End Mill
Representative image shown ⓘ
The image above is intended to represent the product series for illustrative purposes only. The actual product may vary.
Product Series Features:
- Ø25.00 - 40.00 mm
- Weldon Shank
- 16.00 mm Depth of cut
- 17 mm Insert with 2 indexes
- 32-63 Ra finish when engaging the wiper
- Insert radii: 0.4, 0.8, 1.0, 1.6, 2.4, 3.2, 4.0, 4.8, & 6.4 mm R
EDP |
Part Number |
DC Cutting Dia. |
LUX Usable Length Max. |
LPR Protruding Length |
OAL Overall Length |
ZEFF Eff. Teeth |
DCON Shank Dia. |
|
|---|---|---|---|---|---|---|---|---|
| 3027818 | 12J1G025040W5R00 | 25.00 mm | 40.0 mm | 44.0 mm | 100.0 mm | 2 | 25.00 mm | |
| 3027819 | 12J1G032040W6R00 | 32.00 mm | 36.0 mm | 40.0 mm | 100.0 mm | 2 | 32.00 mm | |
| 3027820 | 12J1G032120W6R00 | 32.00 mm | 120.0 mm | 125.0 mm | 185.0 mm | 2 | 32.00 mm | |
| 3027821 | 12J1G040050W6R00 | 40.00 mm | 50.0 mm | 50.0 mm | 110.0 mm | 3 | 32.00 mm | |
| 3027822 | 12J1G040130W6R00 | 40.00 mm | 130.0 mm | 135.0 mm | 195.0 mm | 3 | 32.00 mm |
Notes:
- Relieve cutter body when using insert corner radii larger than R.094 (see product bulletin).
- BOMT17 produces slightly larger diameter (up to .25mm) for 25mm cutter.
