EDP: 3068531 Part: 5X6X100R01 Series: 5X6X - 90° Router Face Mill for Aluminum
Representative image shown ⓘ
The image above is intended to represent the product series for illustrative purposes only. The actual product may vary.
Available : 0
Product Series Features:
- Ø50.0 - 125.0 mm
- 25 mm Insert with 2 indexes
- 20.8 mm Depth of Cut
- Pre-Balanced to G6.3 at 20,000 RPM
- Finishes as good as 15 Ra
- Insert Corners: .031", .062", .093", .125" R
| EDP | Part Number | ISO Number | Description | Additional Info | DXF File | STEP Light File | STEP Detailed File | |
|---|---|---|---|---|---|---|---|---|
| 7009629 | SM40-090-00 | SE02-55 | Screw, M4 × 0.7 × 9 mm, T15 Torx drive, Torque: 30-35 in lb | n/a | n/a | n/a | ||
| 2920530 | DS-A00-.25-T | DS-A00-.25-T | Driver Handle for use with multi-component Qwik Torque system Preset Torque Adapters over 2.0Nm | Optional Accessory Item; Sold Separately | n/a | n/a | n/a | |
| 7011883 | DS-T15B1 | DS-T15B1 | T15 Torx Bit, 2.00" OAL; 1/4" Hex drive | Optional Accessory item; Should be ordered separately | n/a | n/a | n/a | |
| 2920528 | DT-35-.25 | DT-35-.25 | Torque Adapter Unit preset to 35 in lb (4.0 N·m) for use with the multi-component Qwik Torque system | Optional Accessory item; Sold Separately | n/a | n/a | n/a |
 |
Balanced |
