Untitled Document
EDP: 2902934 Part: EBSTD06Z02CM06L10C01 Series: EBST - Center-Cutting Brazed PCD End Mill
Available : 4
Product Series Features:
- Ø4-12 mm
- Carbide Cylindrical Shanks
- 20 mm Max DOC
| Metric | Inch | ||||
|---|---|---|---|---|---|
| MATERIAL | Grade | Vc (m/min) | Fz (mm/z) | Vc (SFM) | Fz (in/tooth) |
| Aluminum Casting Alloys (Si < 12%) |
PCD | 300-500 | 0.05 - 0.18 | 950 - 1650 | .002" - .007" |
| Aluminum Casting Alloys (Si > 12%) |
PCD | 300-500 | 0.04 - 0.14 | 950 - 1650 | .0015" - .0055" |
| Copper, Bronze, Brass Alloys |
PCD | 300-500 | 0.03 - 0.08 | 950 - 1650 | .001" - .003" |
| Magnesium Alloys | PCD | 300-500 | 0.06 - 0.16 | 950 - 1650 | .0025" - .006" |
| Graphite | PCD | 300-500 | 0.06 - 0.16 | 950 - 1650 | .0025" - .006" |
Note: Feed and speed recommendations are starting operating parameters. They are only guidelines from which further optimization should take place. Operating parameters are influenced by many machining variables. These variables may cause for reductions in feeds and speed or dramatic increases. Additionally, DOC and WOC may need to be revised to optimize the tools performance.
