Home >
HiPos-Plus >
12J1G - 90° End Mill (Weldon) >
3018648 12J1G-1006080R01
EDP: 3018648
Part: 12J1G-1006080R01
Series: 12J1G - 90° End Mill (Weldon)
DC Cutting Dia.
1.000
APMX Depth of Cut Max.
0.630
LUX Usable Length Max.
5.75
LPR Protruding Length
6.00
OAL Overall Length
8.00
ZEFF Eff. Teeth
2
KAPR Cutting Edge Angle
90.0
DCON Shank Dia.
1.0000
CSP Coolant
Yes
RMPX Ramp Angle Max.
5.0
Available : 16
Product Series Features:
- Ø.750-2.000"
- Weldon Shank
- 17 mm Insert with 2 indexes
- Optional Coolant
- Insert corners: .015" .031" .062" .093" .125" .156" .187" & .250" R
- 32-63 Ra surface finishes when engaging the wiper (WEP)
- .63" Depth of cut
Notes:
- Relieve cutter body when using insert corner radii larger than R.094 (see product bulletin).
- BOMT17 produces slightly larger diameter (up to .25mm) for 25mm cutter.
Choose a Section
| Part Number | Corner | Application | Grades | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| IN1030 | IN10K | IN2005 | IN2035 | IN2036 | IN2504 | IN2505 | IN2510 | IN2530 | IN2540 | IN4030 | IN6537 | IN7035 | IN90D | ||||
| AOCT170508FR-P | 0.031 R | General Purpose Aluminum | |||||||||||||||
| AOMT170504R | 0.015 R | Multi-Purpose | |||||||||||||||
| AOMT170508R | 0.031 R | Multi-Purpose | |||||||||||||||
| AOMT170508R-HS | 0.031 R | SS/Hi-Temp/Ti | |||||||||||||||
| AOMT170510R | 0.039 R | Multi-Purpose | |||||||||||||||
| AOMT170516R | 0.062 R | Multi-Purpose | |||||||||||||||
| AOMT170516R-HS | 0.062 R | SS/Hi-Temp/Ti | |||||||||||||||
| AOMT170524R | 0.093 R | Multi-Purpose | |||||||||||||||
| AOMT170532R | 0.125 R | Multi-Purpose | |||||||||||||||
| AOMT170532R-HS | 0.125 R | SS/Hi-Temp/Ti | |||||||||||||||
| AOMT170540R | 0.157 R | Multi-Purpose | |||||||||||||||
| AOMT170548R | 0.187 R | Multi-Purpose | |||||||||||||||
| AOMT170550R | 0.197 R | Multi-Purpose | |||||||||||||||
| AOMT170564R | 0.25 R | Multi-Purpose | |||||||||||||||
| AOMT170564R-HS | 0.25 R | SS/Hi-Temp/Ti | |||||||||||||||
| APKT170504R-DT | 0.015 R | PCD Tipped | |||||||||||||||
| BOCT170508FR-P | 0.031 R | Grd/Pol for Al | |||||||||||||||
| BOCT170508R-HS | 0.031 R | Precision - SS/Hi-Temp/Ti | |||||||||||||||
| BOCT170516FR-P | 0.062 R | Grd/Pol for Al | |||||||||||||||
| BOCT170530FR-P | 0.118 R | Grd/Pol for Al | |||||||||||||||
| BOCT170532FR-P | 0.125 R | Grd/Pol for Al | |||||||||||||||
| BOCT170564FR-P | 0.25 R | Grd/Pol for Al | |||||||||||||||
| BOMT170608R | 0.031 R | Heavy-Duty | |||||||||||||||
| ZOCT170508FR-P | 0.031 R | Grd/Pol for Al - Chip Splitters | |||||||||||||||
| ZOMT170508R | 0.031 R | Multi-Purpose - Chip Splitters | |||||||||||||||
| EDP | Part Number | ISO Number | Description | Additional Info | DXF File | STEP Light File | STEP Detailed File | |
|---|---|---|---|---|---|---|---|---|
| 7006441 | SM40-084-20 | SE02-B7 | Screw, M4 X 0.7 × 8.4 mm, T15 Torx drive | n/a | n/a | n/a | ||
| 7019679 | DS-A00T | DS-A00T | Magnetic Combination Straight & T-Style Handle with (2) 6 mm Hex Drive slots (1) Bit Holding Slot | n/a | n/a | n/a | ||
| 7002096 | DS-T156B | BLD T15/S7 | T15 Torx; 90 mm OAL; 6 mm Hex drive | n/a | n/a | n/a | ||
| 2920530 | DS-A00-.25-T | DS-A00-.25-T | Driver Handle for use with multi-component Qwik Torque system Preset Torque Adapters over 2.0Nm | Optional Accessory Item; Sold Separately | n/a | n/a | n/a | |
| 2920528 | DT-35-.25 | DT-35-.25 | Torque Adapter Unit preset to 35 in lb (4.0 N·m) for use with the multi-component Qwik Torque system | Optional Accessory item; Sold Separately | n/a | n/a | n/a | |
| 7011883 | DS-T15B1 | DS-T15B1 | T15 Torx Bit, 2.00" OAL; 1/4" Hex drive | Optional Accessory Item; Sold Separately; For Clamp Screw | n/a | n/a | n/a |
