Series: 5X6Z_R02 - 90° Aluminum Router Face Mill
Representative image shown ⓘ
The image above is intended to represent the product series for illustrative purposes only. The actual product may vary.
Product Series Features:
- Ø2.500 - 10.000"
- For large radius inserts
- 33 mm Insert with 2 Indexes
- .99" Max. Depth of Cut
- 2-Screw clamping ideal for high MRR
- Finishes as good as 15 Ra
- Insert corners: .031" .062" .125" .250" R
EDP |
Part Number |
DC Cutting Dia. |
OAL Overall Length |
ZEFF Eff. Teeth |
DCON Bore Dia. |
KWW Keyway |
|
|---|---|---|---|---|---|---|---|
| 3010451 | 5X6Z-50R02 | 5.000 | 2.875 | 3 | 1.5000 | 0.625 |
Notes:
- Max RPM applies to a properly balanced assembly to G2.5 (toolholder, cutter & inserts)
- To load inserts, lightly tighten both screws first. Next, tighten screw in pocket corner. Finally, tighten screw
EDP |
Part Number |
DC Cutting Dia. |
OAL Overall Length |
ZEFF Eff. Teeth |
DCON Bore Dia. |
KWW Keyway |
|
|---|---|---|---|---|---|---|---|
| 3010449 | 5X6Z-30R02 | 3.000 | 2.875 | 3 | 1.2500 | 0.500 | |
| 3010450 | 5X6Z-40R02 | 4.000 | 2.875 | 3 | 1.5000 | 0.625 | |
| 3010451 | 5X6Z-50R02 | 5.000 | 2.875 | 3 | 1.5000 | 0.625 | |
| 3010452 | 5X6Z-60R02 | 6.000 | 2.875 | 3 | 1.5000 | 0.625 | |
| 3011404 | 5X6Z-80R02 | 8.000 | 2.875 | 3 | 2.5000 | 1.000 | |
| 3010453 | 5X6Z-10R02 | 10.000 | 2.875 | 4 | 2.5000 | 1.000 |
