EDP: 3010450 Part: 5J2Z04R03 Series: 5X6Z_R02 - 90° Aluminum Router Face Mill
Representative image shown ⓘ
The image above is intended to represent the product series for illustrative purposes only. The actual product may vary.
Available : 0
Product Series Features:
- Ø2.500 - 10.000"
- For large radius inserts
- 33 mm Insert with 2 Indexes
- .99" Max. Depth of Cut
- 2-Screw clamping ideal for high MRR
- Finishes as good as 15 Ra
- Insert corners: .031" .062" .125" .250" R
Notes:
- Max RPM applies to a properly balanced assembly to G2.5 (toolholder, cutter & inserts)
- To load inserts, lightly tighten both screws first. Next, tighten screw in pocket corner. Finally, tighten screw
| EDP | Part Number | ISO Number | Description | Additional Info | DXF File | STEP Light File | STEP Detailed File | |
|---|---|---|---|---|---|---|---|---|
| 7001304 | DS-T20T | DS-0034 | T20 T-Handle Torx Driver | n/a | n/a | n/a | ||
| 7005256 | SM50-100-10 | SE03-79 | Screw, M5 × 0.8 × 10 mm, T20 Torx drive | n/a | n/a | n/a | ||
| 2920530 | DS-A00-.25-T | DS-A00-.25-T | Driver Handle for use with multi-component Qwik Torque system Preset Torque Adapters over 2.0Nm | Optional Accessory Item; Sold Separately | n/a | n/a | n/a | |
| 7018957 | DS-T20B1 | DS-T20B1 | T20 Torx Bit, 2.00" OAL; 1/4" Hex drive | Optional Accessory Item; Sold Separately | n/a | n/a | n/a | |
| 2920529 | DT-44-.25 | DT-44-.25 | Torque Adapter Unit preset to 44 in lb (5.0 N·m) for use with the multi-component Qwik Torque system | Optional Accessory item; Sold Separately | n/a | n/a | n/a |
