Series: 15_1H - Chamfer Face Mill
Representative image shown ⓘ
The image above is intended to represent the product series for illustrative purposes only. The actual product may vary.
Product Series Features:
- 45 mm Min
- 25 mm Insert with 2 indexes
- Cutting Edge Angles: 15° 30° 45° 60° & 75°
- Included Angles: 150° 120° 90° 60° & 30°
- 22.8 mm cutting edge length
EDP |
Part Number |
DC Cutting Dia. |
DCX Cutting Dia. Max. |
KAPR Cutting Edge Angle |
PRFA Profile Angle |
APMX Depth of Cut Max. |
OAL Overall Length |
ZEFF Eff. Teeth |
DCON Bore Dia. |
KWW Keyway |
HAND Hand |
DXF File |
STEP Light File |
STEP Detailed File |
|
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3027799 | 15L1H045050F1R00 | 45.00 mm | 58.1 mm | 75.0 | 30 | 24.40 mm | 50.00 mm | 3 | 22.000 mm | 10.40 mm | Right |
EDP |
Part Number |
DC Cutting Dia. |
DCX Cutting Dia. Max. |
KAPR Cutting Edge Angle |
PRFA Profile Angle |
APMX Depth of Cut Max. |
OAL Overall Length |
ZEFF Eff. Teeth |
DCON Bore Dia. |
KWW Keyway |
HAND Hand |
DXF File |
STEP Light File |
STEP Detailed File |
|
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3027799 | 15L1H045050F1R00 | 45.00 mm | 58.1 mm | 75.0 | 30 | 24.40 mm | 50.00 mm | 3 | 22.000 mm | 10.40 mm | Right | ||||
| 3027800 | 15M1H045050F2R00 | 45.00 mm | 70.3 mm | 60.0 | 60 | 21.80 mm | 50.00 mm | 3 | 22.000 mm | 10.40 mm | Right | ||||
| 3027801 | 15N1H045050F2R00 | 45.00 mm | 80.7 mm | 45.0 | 90 | 17.80 mm | 50.00 mm | 3 | 27.000 mm | 12.40 mm | Right | ||||
| 3027802 | 15P1H045050F2R00 | 45.00 mm | 88.5 mm | 30.0 | 120 | 12.40 mm | 50.00 mm | 3 | 27.000 mm | 12.40 mm | Right | ||||
| 3027803 | 15Q1H045050F2R00 | 45.00 mm | 93.4 mm | 15.0 | 150 | 6.40 mm | 50.00 mm | 3 | 27.000 mm | 12.40 mm | Right |
