EDP: 3027803 Part: 15Q1H045050F2R00 Series: 15_1H - Chamfer Face Mill
Representative image shown ⓘ
The image above is intended to represent the product series for illustrative purposes only. The actual product may vary.
View STEP
Available : 0
International: 2
Product Series Features:
- 45 mm Min
- 25 mm Insert with 2 indexes
- Cutting Edge Angles: 15° 30° 45° 60° & 75°
- Included Angles: 150° 120° 90° 60° & 30°
- 22.8 mm cutting edge length
| EDP | Part Number | ISO Number | Description | Additional Info | DXF File | STEP Light File | STEP Detailed File | |
|---|---|---|---|---|---|---|---|---|
| 7005191 | SM35-089-00 | SE02-B2 | Screw, M4 × 0.7 × 9.3 mm, T15 Torx drive | n/a | n/a | n/a | ||
| 7051192 | DIN912M12X30-12.9 | DIN912M12X30-12.9 | SHCS, M12 × 1.75 × 30 mm, 10 mm Hex | n/a | n/a | n/a | ||
| 7055908 | DIN912M12X35-12.9 | ISO4762M12X35-12.9 | SHCS, M12 × 1.75 × 35 mm, 10 mm Hex | n/a | n/a | n/a | ||
| 2920530 | DS-A00-.25-T | DS-A00-.25-T | Driver Handle for use with multi-component Qwik Torque system Preset Torque Adapters over 2.0Nm | Optional Accessory Item; Sold Separately | n/a | n/a | n/a | |
| 2920528 | DT-35-.25 | DT-35-.25 | Torque Adapter Unit preset to 35 in lb (4.0 N·m) for use with the multi-component Qwik Torque system | Optional Accessory item; Sold Separately | n/a | n/a | n/a | |
| 7000078 | DS-T15B | DS-0003 | T15 Torx Bit; 1.00" OAL; 1/4" Hex drive | Optional Accessory Item; Sold Separately | n/a | n/a | n/a |
