Series: 5X6W - 90° Router Face Mill for Aluminum
Product Series Features:
- Ø2.00-6.00"
- 14 mm Insert with 2 indexes
- .61" Depth of Cut
- Finishes as good as 15 Ra
- Insert corners: .020", .031", .062", .093", .125" R
EDP |
Part Number |
DC Cutting Dia. |
OAL Overall Length |
ZEFF Eff. Teeth |
DCON Bore Dia. |
KWW Keyway |
RMPX Ramp Angle Max. |
RPMX RPM Max. |
STEP Light File |
STEP Detailed File |
|
|---|---|---|---|---|---|---|---|---|---|---|---|
| 3027735 | 5X6W-20R01 | 2.000 | 2.000 | 4 | 0.7500 | 0.312 | 6.2 | 20000 | NA |
Notes:
- Max RPM applies to a properly balanced assembly to G2.5 (toolholder, cutter & inserts).
- To load inserts, lightly tighten both screws first. Next, tighten screw in pocket corner. Finally, tighten screw at cutter face.
EDP |
Part Number |
DC Cutting Dia. |
OAL Overall Length |
ZEFF Eff. Teeth |
DCON Bore Dia. |
KWW Keyway |
RMPX Ramp Angle Max. |
RPMX RPM Max. |
STEP Light File |
STEP Detailed File |
|
|---|---|---|---|---|---|---|---|---|---|---|---|
| 3027735 | 5X6W-20R01 | 2.000 | 2.000 | 4 | 0.7500 | 0.312 | 6.2 | 20000 | NA | ||
| 3027736 | 5X6W-25R01 | 2.500 | 2.000 | 4 | 1.0000 | 0.375 | 4.7 | 20000 | NA | NA | |
| 3027737 | 5X6W-30R01 | 3.000 | 2.000 | 5 | 1.0000 | 0.375 | 3.6 | 20000 | |||
| 3027738 | 5X6W-40R01 | 4.000 | 2.375 | 5 | 1.5000 | 0.625 | 2.8 | 20000 | NA | NA | |
| 3027739 | 5X6W-60R01 | 6.000 | 2.375 | 7 | 1.5000 | 0.625 | 1.5 | 20000 | NA | NA |
 |
Balanced |
