EDP: 2927877 Part: 17T07708TQRK02 IN2005 Series: 17T - Extended Neck T-Slitter
Representative image shown ⓘ
The image above is intended to represent the product series for illustrative purposes only. The actual product may vary.
View STEP
Available : 2
International: 42
Product Series Features:
- Ø7.7 mm
- Chip Surfer Connection
- 4 Flute Slitter
- 0.70-2.00 mm width of slot range
- Positive radial & neutral axial rake geometry
Notes:
- Ensure tip is seated firmly on shank (no gap). No lubricant on adaption. Wrenches sold seperately.
- Min. hole dia. to be 0.3mm larger than DC if grooving in a hole.
| EDP | Part Number | ISO Number | Description | Additional Info | DXF File | STEP Light File | STEP Detailed File | |
|---|---|---|---|---|---|---|---|---|
| 7010559 | WS-0043 | WS-0043 | 4mm (C) & 6mm (D) wrench head openings | Optional Accessory Item; Sold Separately | n/a | n/a | ||
| 7011295 | DT-60-06 | DT-60-06 | Torque Wrench for T05 Chip Surfer Heads 6 mm Opening Pre-Set to 60 in lbs | Optional Accessory Item; Sold Separately | n/a | n/a | n/a | |
| 7007521 | WRENCHCS6-05 | CS WRENCH 6-05 7NM | Wrench Head for T05 Chip Surfer 6 mm opening; For use with Adjustable Torque Wrench handle set to 7 N·m / 5 ft lb | Head Only; Adjustable Torque Wrench Handle sold separately | n/a | |||
| 3340289 | WRENCHTORQUE5-50Nm9X12 | TORQUE WRENCH 5-50NM 9X12 | Adjustable Torque Handle (5-50 Nm) for use with Chip Surfer Open End Wrench Heads & Torx Drive Heads, 9 x 12 mm Drive Adaption | n/a | n/a | n/a |
