EDP: 6262410 Part: 1TG1V-10012TUR01 Series: 1TG1V - Hi-Feed End Mill
Representative image shown ⓘ
The image above is intended to represent the product series for illustrative purposes only. The actual product may vary.
View STEP
Available : 6
International: 20
Product Series Features:
- Ø.625-1.000”
- Chip Surfer Connection
- 06 mm IC Insert with 4 indexes
- 1.0 mm (.040") Max. depth of cut
- Double-Sided 4-corner Insert
- Higher Ramp Down Angle with Secure 'V' Clamping for Improved Productivity
Notes:
- Refer to the product bulletin for detailed programming information.
- Insert screw tightening torque: 10-40 in*lb.
| EDP | Part Number | ISO Number | Description | Additional Info | DXF File | STEP Light File | STEP Detailed File | |
|---|---|---|---|---|---|---|---|---|
| 4305309 | WS-0061 | WS-0061 | 20mm wrench head opening for use with T15 Chip Surfer tooling | Optional Accessory Item; Sold Separately | n/a | n/a | ||
| 7019590 | SM25-064-01 | SM25-064-01 | Screw, M2.5 × 0.45 × 6.4 mm, 60 Deg Head Angle; TP8 Torx Plus drive | n/a | n/a | n/a | ||
| 7010891 | DS-TP08S | DS-TP08S | T8 Torx Plus Screwdriver | n/a | n/a | n/a | ||
| 2920530 | DS-A00-.25-T | DS-A00-.25-T | Driver Handle for use with multi-component Qwik Torque system Preset Torque Adapters over 2.0Nm | Optional Accessory Item; Sold Separately | n/a | n/a | n/a | |
| 2926087 | DT-11-.25 | DT-11-.25 | Torque Adapter Unit preset to 10.6 in lb (1.2 N·m) for use with the multi-component Qwik Torque system | Optional Accessory item; Sold Separately | n/a | n/a | n/a | |
| 2934054 | DS-TP08B | DS-TP08B | T8 Torx Plus Bit, 1.00" OAL; 1/4" Hex drive | Optional Accessory Item; Sold Separately | n/a | n/a | n/a |
