EDP: 6260156 - Part Number: XS1090032R8RT1 - Series: XS-S - 3xD QwikReamS Thru Shanks

Careers About Us

Big Cutter One - Next Stop

,

Big Cutter Two - Next Stop

,

Visit the Big Cutter Page

In-Person
Seminars

View our Schedule

Mobile
Seminars

View our Schedule

View the Trade Shows page...

Our Upcoming Trade Shows

	Show Name	Dates	Location	Website
1	PMTS (Precision Machining Technology Show)	April 1–3, 2025	Huntington Convention Center, Cleveland, OH	Show Website

Contact Us
Address:

Ingersoll Cutting Tools
845 S. Lyford Rd.
Rockford, Illinois 61108

Phone or E-Mail:

- 815-387-6600
- info@ingersoll-imc.com

Tech
Support

For Technical Questions

Customer
Service

Get General Assistance

Home > Qwik Ream S > XS-S - 3xD QwikReamS Thru Shanks > 6260156 XS1090032R8RT1

EDP: 6260156
Part: XS1090032R8RT1
Series: XS-S - 3xD QwikReamS Thru Shanks

Coolant-Thru

DCN Cutting Dia. Min.

0.3543 (8.999 mm)

DCX Cutting Dia. Max.

0.3936 (9.997 mm)

SSC Insert Seat Size

XT1

S Thickness

0.177

LU Usable Length

1.24

LF Functional Length

3.19

LS Shank Length

1.77

DCON Shank Dia.

0.375

ULDR Usable Length Dia. Ratio

3×

CSP Coolant

Yes

BMC Body Material Code

Steel

Available : 14

Product Series Features:

Steel Cylindrical Shank
3xD

Coolant-Thru

DCN - Cutting Dia. Min.	0.3543 (8.999 mm)
DCX - Cutting Dia. Max.	0.3936 (9.997 mm)
SSC - Insert Seat Size	XT1
S - Thickness	0.177
LU - Usable Length	1.24
LF - Functional Length	3.19
LS - Shank Length	1.77
DCON - Shank Dia.	0.375
ULDR - Usable Length Dia. Ratio	3×
CSP - Coolant	Yes
BMC - Body Material Code	Steel

Photo of HydroMax

HydroMax
CAT*HYDRO

CAT V-Flange
Hydraulic Milling Chuck
CAT40 Balanced G2.5@18,000 RPM
CAT50 Balanced G2.5@12,000 RPM
Runout Accuracy <.00012"
Recommended for chatter dampening when machining high temperature alloys such as titanium
Chucking forces will be reduced by 25% when using sleeves
*See Notes below

Photo of Tool Holders

Tool Holders
ER*SEAL*AA

ER Series DIN 6499/ISO15488-B Collet
Single Diameter
8 Slot Rubber Sealed Design
AA High Precision
.0002" TIR
Collapse Range 0.008" Max
Super Finish Surface with Anti-Corrosion protection
1450 PSI Max
For use with coolant through cutting tools

Photo of HydroMax

HydroMax
HSKA*HYDRO

HSK-A (DIN 69893/A)
Hydraulic Milling Chuck
HSKA50-A63 balanced G2.5@25,000RPM
HSKA100 balanced G2.5@18,000RPM
Note: Chucking forces will be reduced by 25% when optional reduction sleeves are used
*See additional notes below

Photo of HydroMax

HydroMax
SC*HYDRO

Sealed Reduction Sleeve
For use in hydraulic milling chucks
Note: Sleeves are compatible with all cylindrical shanks and Weldon shanks .250"-.750" diameter (Sleeves are not recommended for use with Weldon shanks over .750" diameter)

Photo of Tool Holders

Tool Holders
SC*SEAL

Sealed Power Milling Chuck Sleeve
1450 Max PSI
Preset Screw available for tool positioning (Sold Separately)
*Chucking forces will be reduced by 25% when optional reduction sleeves are used

Photo of Qwik Ream S

Qwik Ream S
XLB-S - Thru Hole Carbide Reaming Head

Ø.3149 -4724"
Nominal Inch Diameters
Produced to H7 Tolerance
LH Flute
Front End Code B - 25°× 0.042"
Grade IN2005

Photo of Qwik Ream S

Qwik Ream S
XLB-S - Thru Hole Carbide Reaming Head

Ø8.0 - 12.0 mm
Nominal Metric Diameters
Produced to H7 Tolerance
LH Flute
Front End Code B - 25°× 0.042"
Grade IN2005

Photo of Qwik Ream S

Qwik Ream S
XSA-S - Blind Hole Carbide Reaming Head

Ø.3149 - .4724"
Nominal Inch Diameters
Straight Flute
Produced to H7 Tolerance
Front End Code A - 45°× 0.020"
Grade IN2005

Photo of Qwik Ream S

Qwik Ream S
XSA-S - Blind Hole Carbide Reaming Head

Ø8.0 - 12.0 mm
Nominal Metric Diameters
Straight Flute
Front End Code A - 45°× 0.020"
Grade IN2005

QwikReamS New-394-1