EDP: 5811789 Part: 47C16012TRRU06 IN2005 Series: 47_RU - 90° Rough-Fin End Mill
Representative image shown ⓘ
The image above is intended to represent the product series for illustrative purposes only. The actual product may vary.
View STEP
Available : 0
International: 224
Product Series Features:
- Ø8-25 mm
- Chip Surfer Connection
- 4 Flute, 45° Helix
- .7xD Flute Length
- Center-cutting
- 2 serrated edges & 2 smooth edges to diffuse vibration
- Corner: chamfers
Notes:
- When assembling, be sure tip is seated firmly on shank with no gap. No lubricant on adaption. Wrenches sold seperately.
| EDP | Part Number | ISO Number | Description | Additional Info | DXF File | STEP Light File | STEP Detailed File | |
|---|---|---|---|---|---|---|---|---|
| 7010560 | WS-0044 | WS-0044 | 8mm (C) & 13mm (D) wrench head openings for use with T10 Chip Surfer tooling | Optional Accessory Item; Sold separately | n/a | n/a | ||
| 7011300 | DT-250-13 | DT-250-13 | Torque Wrench for T10 Chip Surfer Heads 13 mm Opening Pre-Set to 250 in lbs | Optional Accessory Item; Sold separately | n/a | n/a | n/a |
