EDP: 2929544 Part: 47D-3756T6RQ03 V IN2005 Series: 47D_RQ - 90° Variable Pitch End Mill (1.5xD Flute)
Representative image shown ⓘ
The image above is intended to represent the product series for illustrative purposes only. The actual product may vary.
Available : 14
Product Series Features:
- Ø.312-1.000"
- Chip Surfer Connection
- 4 Flute, 1.5xD Flute Length
- Variable Pitch
- Center Cutting
- Corner: sharp, .015" & .031"R
Notes:
- When assembling, be sure tip is seated firmly on shank with no gap. No lubricant on adaption. Wrenches sold seperately.
- Best suited with Weldon
| EDP | Part Number | ISO Number | Description | Additional Info | DXF File | STEP Light File | STEP Detailed File | |
|---|---|---|---|---|---|---|---|---|
| 7008923 | WS-0029 | WS-0029 | 5 mm (C) & 8 mm (D) wrench head openings for use with T06 Chip Surfer tooling | Optional Accessory Item; Sold separately | n/a | n/a | ||
| 7011297 | DT-90-08 | DT-90-08 | Torque Wrench for T06 Chip Surfer Heads 8 mm Opening Pre-Set to 90 in lbs | Optional Accessory Item; Sold separately | n/a | n/a | n/a |
