EDP: 2928017 Part: 47D-6293TRRQ01 IN2005 Series: 47D_RQ - 90° Variable Pitch End Mill (1.5xD Flute)
Representative image shown ⓘ
The image above is intended to represent the product series for illustrative purposes only. The actual product may vary.
View STEP
Available : 0
International: 82
Product Series Features:
- Ø.312-1.000"
- Chip Surfer Connection
- 4 Flute, 1.5xD Flute Length
- Variable Pitch
- Center Cutting
- Corner: sharp, .015" & .031"R
Notes:
- When assembling, be sure tip is seated firmly on shank with no gap. No lubricant on adaption. Wrenches sold seperately.
- Best suited with Weldon
| EDP | Part Number | ISO Number | Description | Additional Info | DXF File | STEP Light File | STEP Detailed File | |
|---|---|---|---|---|---|---|---|---|
| 7011300 | DT-250-13 | DT-250-13 | Torque Wrench for T10 Chip Surfer Heads 13 mm Opening Pre-Set to 250 in lbs | Optional Accessory Item; Sold separately | n/a | n/a | n/a | |
| 7010560 | WS-0044 | WS-0044 | 8mm (C) & 13mm (D) wrench head openings for use with T10 Chip Surfer tooling | Optional Accessory Item; Sold separately | n/a | n/a |
