EDP: 6321203 - Part Number: S016LPSA-16 - Series: S*L*SA - Steel Shank, Necked

Careers About Us

Big Cutter One - Next Stop

,

Big Cutter Two - Next Stop

,

Visit the Big Cutter Page

In-Person
Seminars

View our Schedule

Mobile
Seminars

View our Schedule

View the Trade Shows page...

Our Upcoming Trade Shows

	Show Name	Dates	Location	Website
1	PMTS (Precision Machining Technology Show)	April 1–3, 2025	Huntington Convention Center, Cleveland, OH	Show Website

Contact Us
Address:

Ingersoll Cutting Tools
845 S. Lyford Rd.
Rockford, Illinois 61108

Phone or E-Mail:

- 815-387-6600
- info@ingersoll-imc.com

Tech
Support

For Technical Questions

Customer
Service

Get General Assistance

Home > MultiSurfer > S*L*SA - Steel Shank, Necked > 6321203 S016LPSA-16

EDP: 6321203
Part: S016LPSA-16
Series: SLSA - Steel Shank, Necked

View STEP

DCON Shank Dia.

16.00 mm

CCWS Connection Code Workpiece Side

Multi-Surfer LP

LB Body Length

13.00 mm

LBX Body Length Max.

16.60 mm

LF Functional Length

100.00 mm

OAL Overall Length

104.35 mm

BD Body Dia.

13.00 mm

CSP Coolant

No

BMC Body Material Code

Steel

Available : 3
International: 32

Product Series Features:

Cylindrical Shank (Metric)
MultiSurfer Connection
Neck Relief
Ideal for slotting and threading tips
Shank modifications can be made by cutting off the back to desired length or turning back neck for more usable length
Strong and precise Pilot, Screw & Tri-Lobe Drive Connection

DCON - Shank Dia.	16.00 mm
CCWS - Connection Code Workpiece Side	Multi-Surfer LP
LB - Body Length	13.00 mm
LBX - Body Length Max.	16.60 mm
LF - Functional Length	100.00 mm
OAL - Overall Length	104.35 mm
BD - Body Dia.	13.00 mm
CSP - Coolant	No
BMC - Body Material Code	Steel
DXF File
STEP Light File
STEP Detailed File

Choose a Section

Photo of MultiSurfer

MultiSurfer
18F 19F - 90° Face Mill Tip

Ø25-40 mm
Muti-Surfer Connection
8-10 mm DOC
25 - 40 Ra surface finishes when engaging the wiper (WEP)
Corners: 0.4 mm R
Strong and precise Bore, Screw & Tri-Lobe Drive Connection that accommodates high torque transfer

Photo of MultiSurfer

MultiSurfer
18T 19T - T-Slot Tip

Ø.970-1.562"
Multi-Surfer Connection
.125-.375" Width of slot range
6-10 Flute stagger tooth
Positive axial & positive radial rake geometry
Strong and precise Bore, Screw & Tri-Lobe Drive Connection that accomodates high torque transfer

Photo of MultiSurfer

MultiSurfer
18T 19T - T-Slot Tip

Ø24.7-39.7 mm
Multi-Surfer Connection
3.0-10.0 mm Width of slot range
6-10 Flute stagger tooth
Positive axial & positive radial rake geometry
Strong and precise Bore, Screw & Tri-Lobe Drive Connection that accomodates high torque transfer

Photo of MultiSurfer

MultiSurfer
18Y_60 & 19Y_60 - Thread Mill Tip

60° Partial Profile
Ø24.7 mm Min.
Multi-Surfer Connection
6-10 Flute
Strong and precise Bore, Screw & Tri-Lobe Drive Connection

Photo of MaxSFeed

MaxSFeed
3EJ6A - Modular Axial Drive Slotter

Ø.875-1.500"
.276" Cutting Width
MultiSurfer Connection
Insert with 4 indexes (2LH/2RH)
Insert radii: .015"
Half Effective

Photo of HydroMax

HydroMax
BT*FC*HYDRO

BT MAS-403 Face Contact
Hydraulic Milling Chuck (Metric)
High runout accuracy of < 0.003 mm
For use in Reaming, Drilling, Finish Milling, and fine, accurate machining applications
Balanced G2.5@18,000 RPM
Chucking forces will be reduced by 25% when using sleeves
*See Notes below

Photo of HydroMax

HydroMax
BT*HYDRO

BT MAS-403
Hydraulic Milling Chuck (Metric)
High runout accuracy of < 0.003 mm
For use in Reaming, Drilling, Finish Milling, and fine, accurate machining applications
BT30/BT40 balanced G2.5@18,000 RPM
BT50 balanced G2.5@12,000 RPM
Chucking forces will be reduced by 25% when using sleeves
*See Notes below

Photo of HydroMax

HydroMax
BT*HYDRO*HD

BT MAS-403
Heavy Duty Hydraulic Milling Chuck (Metric)
High runout accuracy of < 0.003 mm
For use in Reaming, Drilling, Tapping, and difficult high volume machining applications
Balanced G2.5@25,000 RPM
Chucking forces will be reduced by 25% when reduction sleeves are used
*See Notes below

Photo of HydroMax

HydroMax
DIN69871*HYDRO

DIN69871 V-Flange
Hydraulic Milling Chuck (Metric)
High runout accuracy of < 0.003 mm
For use in Reaming, Drilling, Finish Milling, and fine, accurate machining applications
DIN69871-40 balanced G2.5@18,000 RPM
DIN69871-50 balanced G2.5@12,000 RPM
Chucking forces will be reduced by 25% when using sleeves
*See Notes below

Photo of HydroMax

HydroMax
DIN69871*HYDRO*HD

DIN69871 / SK V-Flange
Heavy Duty Hydraulic Milling Chuck (Metric)
High runout accuracy of < 0.003 mm
For use in Reaming, Drilling, Tapping, and difficult high volume machining applications
Balanced G2.5@25,000 RPM
Chucking forces will be reduced by 25% when using sleeves
*See Notes below

Photo of Tool Holders

Tool Holders
ER*SEAL*AA JET

DIN 6499/ISO 15488-B Collet
Single Diameter (Metric)
8 Slot Rubber Sealed Design with 4 Cooling Jets directing coolant flow to the cutting edge
AA High Precision
0.005 mm TIR
Collapse Range 0.2 mm Max
Super Finish Surface with Anti-Corrosion protection
100 Bar Max
For use with solid shank cutting tools
Recommended for improved runout & clamping torque

Photo of Tool Holders

Tool Holders
ER*SPR

ER Series DIN 6499 /ISO15488-B Spring Collet
Inch/Metric Combination
.0004" TIR
Hard Touch Coated
NOTE: ER11 COLLETS SHOWN WITH .039" (1 mm) CLAMPING RANGE HAVE BEEN PHASED OUT AND REPLACED WITH .020" (0.5 mm) CLAMPING RANGE

Photo of Tool Holders

Tool Holders
ER*SPR*AA

ER Series DIN 6499 Spring Collet
Inch/Metric Combination
AA High Precision
.0002" TIR
Hard Touch coated

Photo of HydroMax

HydroMax
HSKA*HYDRO

HSK-A (DIN 69893/A)
Hydraulic Milling Chuck (Metric)
HSKA50, A63 balanced G2.5@25,000RPM
HSKA80, A100 balanced G2.5@18,000RPM
Note: Chucking forces will be reduced by 25% when optional reduction sleeves are used
*See additional notes below

Photo of HydroMax

HydroMax
HSKA*HYDRO Long

HSK-A (DIN 69893/A)
Hydraulic Milling Chuck (Metric)
HSKA50, A63 balanced G2.5@25,000RPM
HSKA80, A100 balanced G2.5@18,000RPM
Note: Chucking forces will be reduced by 25% when optional reduction sleeves are used
*See additional notes below

Photo of Tool Holders

Tool Holders
SC*HYDRO

OBSOLETE - See SC*HYDRO*HD
Sealed Reduction Sleeve (Metric)
For use in hydraulic milling chucks
Note: Sleeves are compatible with all cylindrical shanks and flatted shanks 6-20 mm diameter (Sleeves are not recommended for use with flatted shanks over 20 mm diameter)

Photo of HydroMax

HydroMax
SC*HYDRO

Sealed Reduction Sleeve (Inch to Metric)
For use in hydraulic milling chucks
Max Runout 0.0001"
Note: Sleeves are compatible with all cylindrical shanks and Weldon shanks .250"-.750" diameter (Sleeves are not recommended for use with Weldon shanks over .750" diameter)

Photo of HydroMax

HydroMax
SC*HYDRO*HP

Sealed Reduction Sleeve (Metric)
For use in hydraulic milling chucks
Runout Accuracy <0.003 mm
Max Coolant Pressure 85 Bar
Note: Sleeves are compatible with all cylindrical shanks and flatted shanks 6-20 mm diameter (Sleeves are not recommended for use with flatted shanks over 20 mm diameter)

Photo of Tool Holders

Tool Holders
SC*SPR

Straight Sleeve/Collet (Metric)
For use with MAXIN Power Milling Chucks
Preset Screw available for tool positioning (Sold Separately)
*Chucking forces will be reduced by 25% when optional reduction sleeves are used

Photo of Tool Holders

Tool Holders
SC*SPR INCH/METRIC

Straight Sleeve/Collet (Inch OD to Metric ID)
For use with Power Milling Chucks
Chucking forces will be reduced by 25% when optional reduction sleeves are used

	EDP	Part Number	ISO Number	Description	Additional Info	DXF File	STEP Light File	STEP Detailed File
	6320858	TS40T098/HG-P	TS40T098/HG-P	Screw, M4 × 0.5 × 9.8 mm, TP15 Torx Plus drive	Torque 35 in lb (4 N·m)	n/a	n/a	n/a
	7003093	DS-TP156B	BLD IP15/S7	TP15 Torx Plus Driver Blade,90 mm OAL; 6 mm Hex drive		n/a	n/a	n/a
	7019679	DS-A00T	DS-A00T	Magnetic Combination Straight & T-Style Handle with (2) 6 mm Hex Drive slots (1) Bit Holding Slot		n/a	n/a	n/a

MultiSurfer