EDP: 3027726 Part: 15X1W-12017X8R01 Series: 15X1W - 90° Aluminum Router End Mill
Representative image shown ⓘ
The image above is intended to represent the product series for illustrative purposes only. The actual product may vary.
View STEP
Available : 4
International: 6
Product Series Features:
- Ø.750-1.500"
- TopOn Connection
- 14 mm Insert with 2 indexes
- .61" Depth of cut
- 2-Screw clamping ideal for high MRR
- Finishes as good as 15 Ra
- Insert corners: .020" .031" .062" .079" .093" .125" .157" R
Notes:
- Max RPM applies to a properly balanced assembly to G2.5 (toolholder, cutter & inserts).
- To load inserts, lightly tighten both screws first. Next, tighten screw in pocket corner. Finally, tighten screw at cutter face.
| EDP | Diameter | Part Number | Adaption | Number of Inserts | DXF File | STEP Light File | STEP Detailed File | |
|---|---|---|---|---|---|---|---|---|
| 7019164 | NA | 622MM | NA | - | n/a | n/a | n/a | |
| 7070040 | NA | SM30-082-00 | NA | - | n/a | n/a | n/a | |
| 2926085 | NA | DS-A00-.25-S | NA | - | n/a | n/a | n/a | |
| 7009746 | NA | DS-T09B | 1/4" Hex | - | n/a | n/a | n/a | |
| 2926274 | NA | DT-18-.25 | 1/4" Hex | - | n/a | n/a | n/a | |
| 7009052 | NA | DS-T09W | NA | - | n/a | n/a | n/a | |
| 7019679 | NA | DS-A00T | NA | - | n/a | n/a | n/a |
