Untitled Document
RIGHT WAY (4 steps below)
WRONG WAY (4 steps below)
EDP: 4542130 Part: ER32ODPM08X25 Series: ER*ODP
View STEP
Available : 0
International: 26
Product Series Features:
- ER Style Integral Collet
- TopOn Threaded Adaption Adapter
- JET2 Style Ported Coolant
- Max 1450 psi
- For use with standard straight shank tooling
Integral ER Collet Assembly Instructions
RIGHT WAY (4 steps below)
(Click image to enlarge)
1. Place the nut on the integral ER collet. Assemble the nut with the shank by mating the retention tabs with the ER groove.
(Click image to enlarge)
2. The nut/shank assembly is shown ready for installation.
(Click image to enlarge)
3. Place the nut/shank assembly into the holder and secure the nut.
(Click image to enlarge)
4. No gap.
WRONG WAY (4 steps below)
(Click image to enlarge)
1. Remove nut from ER holder.
(Click image to enlarge)
2. Place the integral ER collet into the collet chuck.
(Click image to enlarge)
3. Screw the nut on the holder.
(Click image to enlarge)
4. The nut will BIND up on the retention tabs prematurely, leaving a GAP. Applying extra force may BREAK THE NUT.
