EDP: 4510613 Part: HSKA100HYDRO20X150 Series: HSKA*HYDRO Long
Representative image shown ⓘ
The image above is intended to represent the product series for illustrative purposes only. The actual product may vary.
View STEP
Available : 0
International: 2
Product Series Features:
- HSK-A (DIN 69893/A)
- Hydraulic Milling Chuck (Metric)
- HSKA50, A63 balanced G2.5@25,000RPM
- HSKA80, A100 balanced G2.5@18,000RPM
- Note: Chucking forces will be reduced by 25% when optional reduction sleeves are used
- *See additional notes below
Notes:
- A cooling tube must be used with all coolant through HSK spindles and should be ordered separately.
- *Images are a representation of the product series as a whole & therefore may not be an exact representation of a specific item.
| EDP | Diameter | Part Number | Adaption | Number of Inserts | DXF File | STEP Light File | STEP Detailed File | |
|---|---|---|---|---|---|---|---|---|
| 4559439 | NA | TESTBARHYDRO20 | Test Bar 20 mm | - | n/a | n/a | n/a | |
| 4517188 | NA | WRENCHHYDROHEX4 | NA | - | n/a | n/a | n/a | |
| 4517189 | NA | HYDROCLAMPSCREWM8X14 | NA | - | n/a | n/a | n/a |
