EDP: 4510598 Part: HSKA100HYDRO10X150 Series: HSKA*HYDRO Long
Representative image shown ⓘ
The image above is intended to represent the product series for illustrative purposes only. The actual product may vary.
View STEP
Available : 0
International: 11
Product Series Features:
- HSK-A (DIN 69893/A)
- Hydraulic Milling Chuck (Metric)
- HSKA50, A63 balanced G2.5@25,000RPM
- HSKA80, A100 balanced G2.5@18,000RPM
- Note: Chucking forces will be reduced by 25% when optional reduction sleeves are used
- *See additional notes below
Notes:
- A cooling tube must be used with all coolant through HSK spindles and should be ordered separately.
- *Images are a representation of the product series as a whole & therefore may not be an exact representation of a specific item.
| EDP | Part Number | ISO Number | Description | Additional Info | DXF File | STEP Light File | STEP Detailed File | |
|---|---|---|---|---|---|---|---|---|
| 4559434 | TESTBARHYDRO10 | TESTBARHYDRO10 | 10 x 56 mm Torque Test Bar, 10 mm Hex Drive, Torque 50 N·m; Minimum Engagement = 32 mm | Optional Accessory Item; Sold separately | n/a | n/a | n/a | |
| 4517188 | WRENCHHYDROHEX4 | WRENCHHYDROHEX4 | 4 mm Hex Drive L-Key | Optional Accessory Item; Sold separately | n/a | n/a | n/a | |
| 4517189 | HYDROCLAMPSCREWM8X14 | HYDROCLAMPSCREWM8X14 | Screw, M8 x 14 mm OAL, Coolant through, 8.5 mm Head diameter, | Actuation screw (1) | n/a | n/a | n/a |
