EDP: 3139926 Part: S100T15CA-11 Series: S*T*CA - Carbide Shank, No Neck
Representative image shown ⓘ
The image above is intended to represent the product series for illustrative purposes only. The actual product may vary.
Available : 4
International: 5
Product Series Features:
- Cylindrical Shank
- Chip Surfer Connection
- No Neck Relief
- Due to tolerance, shank diameter will be slightly larger than tip diameter. .010" per side neck modification required for clearance when milling 90° shoulder
Notes:
- When assembling, be sure carbide tip is seated firmly on shank with no gap. No lubricant on adaption. Wrenches sold seperately.
- Tightening Torque:
- T05=60 in lb
- T06=90 in lb
- T08=130 in lb
- T10=250 in lb
- T12=250 in lb
- T15=350 in lb
