EDP: 2908432 Part: 5C2M-12R01 Series: 5C2M - 60° Heavy Duty Face Mill
Representative image shown ⓘ
The image above is intended to represent the product series for illustrative purposes only. The actual product may vary.
View STEP
Available : 2
Product Series Features:
- Ø4.00-14.00" (RH rotation)
- .51" Depth of cut
- 20 mm Insert with 4 indexes
- Finishes as good as 63 Ra
- Wedge-held inserts with pocket protection
- Power shear geometry ideally suited for hard materials, weld & interruptions
Notes:
- Insert seat screw tightening torque: 40-45 in*lb.
- Insert wedge screw tightening torque: 55-60 in*lb.
- *Images are a representation of the product series and therefore may not be an exact representation of the specific item
| EDP | Diameter | Part Number | Adaption | Number of Inserts | DXF File | STEP Light File | STEP Detailed File | |
|---|---|---|---|---|---|---|---|---|
| 7018925 | NA | SM50-130-R0 | NA | - | n/a | n/a | n/a | |
| 4352522 | NA | TS80200W | NA | - | n/a | n/a | n/a | |
| 7019679 | NA | DS-A00T | NA | - | n/a | n/a | n/a | |
| 7002090 | NA | DS-T206B | 6 mm Hex | - | n/a | n/a | ||
| 7007111 | NA | DS-H04T | NA | - | n/a | n/a | n/a | |
| 4354202 | NA | WSC8R-21 | NA | - | n/a | n/a | n/a | |
| 2907586 | NA | PAR0748 | NA | - | n/a | n/a | n/a | |
| 7009114 | NA | SD10-68 | NA | - | n/a | n/a | n/a | |
| 7003488 | NA | SD12-51 | NA | - | n/a | n/a | n/a | |
| 2909904 | NA | KIT HARDWARE 5C2M-R | NA | - | n/a | n/a | n/a |
