EDP: 2907295 Part: 9N6A-04R01 Series: 9N6A - 45° Face Mill
Representative image shown ⓘ
The image above is intended to represent the product series for illustrative purposes only. The actual product may vary.
View STEP
Available : 4
Product Series Features:
- Ø2.00- 6.00"
- Insert with 4 indexes
- .31" Max depth of cut
- Power shear geometry ideally suited for hard materials, weld & interruptions
Notes:
- Insert screw tightening torque: 30-35 in*lb
- *Images are a representation of the product series and therefore may not be an exact representation of the specific item
| EDP | Part Number | ISO Number | Description | Additional Info | DXF File | STEP Light File | STEP Detailed File | |
|---|---|---|---|---|---|---|---|---|
| 7019137 | SM40-140-R0 | SM40-140-R0 | Screw, M4 × 0.7 × 14 mm, T15 Torx drive | n/a | n/a | n/a | ||
| 7019679 | DS-A00T | DS-A00T | Magnetic Combination Straight & T-Style Handle with (2) 6 mm Hex Drive slots (1) Bit Holding Slot | n/a | n/a | n/a | ||
| 7002096 | DS-T156B | BLD T15/S7 | T15 Torx; 90 mm OAL; 6 mm Hex drive | n/a | n/a | n/a | ||
| 7002894 | SD-12-82 | SD12-82 | SHCS, 3/4-16 × 1.50", 5/8" Hex Drive | For use with 1-1/2" Pilot | n/a | n/a | n/a | |
| 2920530 | DS-A00-.25-T | DS-A00-.25-T | Driver Handle for use with multi-component Qwik Torque system Preset Torque Adapters over 2.0Nm | Optional Accessory Item; Sold Separately | n/a | n/a | n/a | |
| 2920528 | DT-35-.25 | DT-35-.25 | Torque Adapter Unit preset to 35 in lb (4.0 N·m) for use with the multi-component Qwik Torque system | Optional Accessory item; Sold Separately | n/a | n/a | n/a | |
| 7000078 | DS-T15B | DS-0003 | T15 Torx Bit; 1.00" OAL; 1/4" Hex drive | Optional Accessory Item; Sold Separately | n/a | n/a | n/a |
