EDP: 2906698 Part: 25J3P-20035D1R01 Series: 25J3P - 90° Shell Mill
Representative image shown ⓘ
The image above is intended to represent the product series for illustrative purposes only. The actual product may vary.
View STEP
Available : 1
Product Series Features:
- Ø2.000-4.000"
- Bore & Keyway
- All Eff. / RH Helix
- 13 mm Insert with 4 indexes
- Ideal for roughing SS & Hi-Temps
- Insert corners: .031", .062", .125" R
Notes:
- Ø 2.00 x 4 flute cutters must use ZDES/ZDMS if radial width of cut is over .50".
- Nose insert is tipped on a slight angle. Use insert SDMS1306**N-FL for true 90°
- Total Number of Inserts = ZNF + ZNP.
- Insert screw tightening torque: 30-35 in*lb.
| EDP | Diameter | Part Number | Adaption | Number of Inserts | DXF File | STEP Light File | STEP Detailed File | |
|---|---|---|---|---|---|---|---|---|
| 7019041 | NA | SM40-100-R0 | NA | - | n/a | n/a | n/a | |
| 7019679 | NA | DS-A00T | NA | - | n/a | n/a | n/a | |
| 7002096 | NA | DS-T156B | 6 mm Hex | - | n/a | n/a | ||
| 2906753 | NA | SD-06-B2 | NA | - | n/a | n/a | n/a | |
| 2920530 | NA | DS-A00-.25-T | NA | - | n/a | n/a | n/a | |
| 2920528 | NA | DT-35-.25 | 1/4" Hex | - | n/a | n/a | n/a | |
| 7011883 | NA | DS-T15B1 | 1/4" Hex | - | n/a | n/a | n/a |
