Series: KJ5P, KJ6P - 90° Face Mill
Representative image shown ⓘ
The image above is intended to represent the product series for illustrative purposes only. The actual product may vary.
Product Series Features:
- Ø2.000-6.500"
- 13 mm Insert with 3 indexes
- .57" Depth of Cut
- 32-63 Ra surface finishes when engaging the wiper (WEP)
- Insert corners: .015", .031", .062", .094", .125" R
EDP |
Part Number |
DC Cutting Dia. |
OAL Overall Length |
ZEFF Eff. Teeth |
DCON Bore Dia. |
KWW Keyway |
CSP Coolant |
RMPX Ramp Angle Max. |
STEP Light File |
STEP Detailed File |
|
|---|---|---|---|---|---|---|---|---|---|---|---|
| 2926830 | KJ5P-30R01 | 3.000 | 1.750 | 7 | 1.0000 | 0.375 | Yes | 1.0 | NA |
EDP |
Part Number |
DC Cutting Dia. |
OAL Overall Length |
ZEFF Eff. Teeth |
DCON Bore Dia. |
KWW Keyway |
CSP Coolant |
RMPX Ramp Angle Max. |
STEP Light File |
STEP Detailed File |
|
|---|---|---|---|---|---|---|---|---|---|---|---|
| 2926826 | KJ5P-20R01 | 2.000 | 1.750 | 5 | 0.7500 | 0.312 | Yes | 1.5 | NA | ||
| 2926828 | KJ6P-20R01 | 2.000 | 1.750 | 4 | 0.7500 | 0.312 | Yes | 1.5 | NA | ||
| 2926829 | KJ5P-25R01 | 2.500 | 1.750 | 6 | 0.7500 | 0.312 | Yes | 1.1 | NA | ||
| 2926830 | KJ5P-30R01 | 3.000 | 1.750 | 7 | 1.0000 | 0.375 | Yes | 1.0 | NA | ||
| 3031438 | KJ6P-30R01 | 3.000 | 1.750 | 6 | 1.0000 | 0.375 | Yes | 1.0 | NA | ||
| 3031440 | KJ5P-40R01 | 4.000 | 1.750 | 8 | 1.5000 | 0.625 | No | 0.7 | NA | ||
| 2926831 | KJ5P-40R02 | 4.000 | 2.375 | 8 | 1.5000 | 0.625 | Yes | 0.7 | NA | ||
| 2926833 | KJ6P-40R02 | 4.000 | 2.375 | 6 | 1.5000 | 0.625 | Yes | 0.7 | NA | ||
| 3031441 | KJ6P-50R01 | 5.000 | 2.000 | 9 | 1.5000 | 0.625 | No | 0.5 | NA | ||
| 2926834 | KJ6P-50R02 | 5.000 | 2.375 | 9 | 1.5000 | 0.625 | Yes | 0.5 | NA | ||
| 3031443 | KJ5P-60R01 | 6.000 | 2.000 | 12 | 1.5000 | 0.625 | No | 0.6 | |||
| 3031442 | KJ6P-60R01 | 6.000 | 2.000 | 8 | 1.5000 | 0.625 | No | 0.6 | NA | ||
| 2922454 | KJ6P-65R01 | 6.500 | 2.000 | 10 | 1.5000 | 0.625 | No | 0.4 | NA |
