Series: 45N_RA - Front-Back Chamfer & C'Sink
Product Series Features:
- Ø1.20 mm Min.
- Chip Surfer Connection
- 45° Cutting Edge Angle (front & back)
- 90° Included Angle
- 2 flute
EDP |
Part Number |
DCX Cutting Dia. Max. |
DC Cutting Dia. |
KAPR1 Cutting Edge Angle |
APMX1 Depth of Cut Max. |
KAPR2 Cutting Edge Angle |
APMX2 Depth of Cut Max. |
FW Flat Width |
LF Functional Length |
ZEFF Eff. Flutes |
CCMS Connection Code Machine Side |
DHUB Hub Dia. |
DXF File |
|
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 5873268 | 45N11814T6RA45 IN2005 | 11.80 mm | 1.20 mm | 45.0 | 5.30 mm | 45.0 | 1.20 mm | 2.00 mm | 11.20 mm | 2 | Chip Surfer T06 | 9.30 mm |
Notes:
- When assembling, be sure tip is seated firmly on shank with no gap. No lubricant on adaption. Wrenches sold seperately.
EDP |
Part Number |
DCX Cutting Dia. Max. |
DC Cutting Dia. |
KAPR1 Cutting Edge Angle |
APMX1 Depth of Cut Max. |
KAPR2 Cutting Edge Angle |
APMX2 Depth of Cut Max. |
FW Flat Width |
LF Functional Length |
ZEFF Eff. Flutes |
CCMS Connection Code Machine Side |
DHUB Hub Dia. |
DXF File |
|
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 5849026 | 45N09809TQRA45 IN2005 | 9.80 mm | 1.20 mm | 45.0 | 4.30 mm | 45.0 | 0.90 mm | 2.50 mm | 10.80 mm | 2 | Chip Surfer T05 | 7.60 mm | ||
| 5873268 | 45N11814T6RA45 IN2005 | 11.80 mm | 1.20 mm | 45.0 | 5.30 mm | 45.0 | 1.20 mm | 2.00 mm | 11.20 mm | 2 | Chip Surfer T06 | 9.30 mm | ||
| 5849027 | 45N15722T8RA45 IN2005 | 15.70 mm | 1.50 mm | 45.0 | 7.10 mm | 45.0 | 2.20 mm | 2.00 mm | 14.00 mm | 2 | Chip Surfer T08 | 11.50 mm |
