Series: TQS20
Product Series Features:
- Precision Four Corner Insert
- For Parting, Grooving, & Turning
- Flat Top
Part Number |
CW Cutting Width |
RE Corner Radius |
CDX Cutting Depth Max. |
IH Insert Hand |
FEEDGN Grooving Feed Min. |
FEEDGX Grooving Feed Max. |
|
|---|---|---|---|---|---|---|---|
| TQS20-0.50-0.05-R | 0.020 | 0.002 | 0.087 | Right | 0.0010 | 0.0030 |
Notes:
- CDX = Maximum Groove Depth
- Dependent on workpiece diameter "CUTDIA"
- Refer to chart
Part Number |
CW Cutting Width |
RE Corner Radius |
CDX Cutting Depth Max. |
IH Insert Hand |
FEEDGN Grooving Feed Min. |
FEEDGX Grooving Feed Max. |
|
|---|---|---|---|---|---|---|---|
| TQS20-0.50-0.05-L | 0.020 | 0.002 | 0.087 | Left | 0.0010 | 0.0030 | |
| TQS20-0.50-0.05-R | 0.020 | 0.002 | 0.087 | Right | 0.0010 | 0.0030 | |
| TQS20-0.80-0.05-L | 0.032 | 0.002 | 0.098 | Left | 0.0010 | 0.0030 | |
| TQS20-0.80-0.05-R | 0.032 | 0.002 | 0.098 | Right | 0.0010 | 0.0030 | |
| TQS20-1.00-0.10-L | 0.039 | 0.004 | 0.106 | Left | 0.0010 | 0.0030 | |
| TQS20-1.00-0.10-R | 0.039 | 0.004 | 0.106 | Right | 0.0010 | 0.0030 | |
| TQS20-1.20-0.05-L | 0.047 | 0.002 | 0.118 | Left | 0.0010 | 0.0030 | |
| TQS20-1.20-0.05-R | 0.047 | 0.002 | 0.118 | Right | 0.0010 | 0.0030 | |
| TQS20-1.20-0.10-L | 0.047 | 0.004 | 0.118 | Left | 0.0010 | 0.0030 | |
| TQS20-1.20-0.10-R | 0.047 | 0.004 | 0.118 | Right | 0.0010 | 0.0030 | |
| TQS20-1.50-0.10-L | 0.059 | 0.004 | 0.197 | Left | 0.0010 | 0.0040 | |
| TQS20-1.50-0.10-R | 0.059 | 0.004 | 0.197 | Right | 0.0010 | 0.0040 | |
| TQS20-1.57-0.05-L | 0.062 | 0.002 | 0.197 | Left | 0.0010 | 0.0030 | |
| TQS20-1.57-0.05-R | 0.062 | 0.002 | 0.197 | Right | 0.0010 | 0.0030 | |
| TQS20-1.57-0.10-L | 0.062 | 0.004 | 0.197 | Left | 0.0010 | 0.0040 | |
| TQS20-1.57-0.10-R | 0.062 | 0.004 | 0.197 | Right | 0.0010 | 0.0040 | |
| TQS20-2.00-0.10-L | 0.079 | 0.004 | 0.197 | Left | 0.0010 | 0.0040 | |
| TQS20-2.00-0.10-R | 0.079 | 0.004 | 0.197 | Right | 0.0010 | 0.0040 | |
| TQS20-2.00-0.20-R | 0.079 | 0.008 | 0.197 | Right | 0.0010 | 0.0040 | |
| TQS20-2.00-1.00-L | 0.079 | 0.039 | 0.197 | Left | 0.0015 | 0.0055 | |
| TQS20-2.00-1.00-R | 0.079 | 0.039 | 0.197 | Right | 0.0015 | 0.0055 | |
| TQS20-2.39-0.05-L | 0.094 | 0.002 | 0.197 | Left | 0.0010 | 0.0030 | |
| TQS20-2.39-0.05-R | 0.094 | 0.002 | 0.197 | Right | 0.0010 | 0.0030 | |
| TQS20-2.39-0.10-L | 0.094 | 0.004 | 0.197 | Left | 0.0020 | 0.0050 | |
| TQS20-2.39-0.10-R | 0.094 | 0.004 | 0.197 | Right | 0.0020 | 0.0050 | |
| TQS20-2.50-0.10-L | 0.098 | 0.004 | 0.197 | Left | 0.0020 | 0.0050 | |
| TQS20-2.50-0.10-R | 0.098 | 0.004 | 0.197 | Right | 0.0020 | 0.0050 | |
| TQS20-3.00-0.10-L | 0.118 | 0.004 | 0.197 | Left | 0.0015 | 0.0060 | |
| TQS20-3.00-0.10-R | 0.118 | 0.004 | 0.197 | Right | 0.0015 | 0.0060 | |
| TQS20-3.00-1.50-L | 0.118 | 0.059 | 0.197 | Left | 0.0015 | 0.0060 | |
| TQS20-3.00-1.50-R | 0.118 | 0.059 | 0.197 | Right | 0.0015 | 0.0060 | |
| TQS20-3.18-0.10-L | 0.125 | 0.004 | 0.197 | Left | 0.0015 | 0.0060 | |
| TQS20-3.18-0.10-R | 0.125 | 0.004 | 0.197 | Right | 0.0015 | 0.0060 |
Chip Breakers
- 1st choice for general grooving at higher feed rates
- Stable and straight cutting edge
- For carbon steel and alloy steel
- 1st choice for soft materials at lower feed rates
- Sharp cutting edge
- For stainless, HRSA, and low carbon steel
- High positive rake angle
- Straight cutting edge
- Low cutting force
- Flat top
