Series: 2J1G - 90° Face Mill
Representative image shown ⓘ
The image above is intended to represent the product series for illustrative purposes only. The actual product may vary.
Product Series Features:
- Ø40.00 - 160.00 mm
- Bore & Keyway
- 16.00 mm Depth of cut
- 17 mm Insert with 2 indexes
- 32-63 Ra finish when engaging the wiper
- Insert radii: 0.4, 0.8, 1.0, 1.6, 2.4, 3.2, 4.0, 4.8, 6.4 mm R
EDP |
Part Number |
DC Cutting Dia. |
OAL Overall Length |
ZEFF Eff. Teeth |
DCON Bore Dia. |
KWW Keyway |
CSP Coolant |
DXF File |
STEP Light File |
STEP Detailed File |
|
|---|---|---|---|---|---|---|---|---|---|---|---|
| 3027841 | 2J1G050R00 | 50.00 mm | 40.00 mm | 4 | 22.00 mm | 10.40 mm | Yes |
Notes:
- Relieve cutter body when using insert corner radii larger than R.094 (see product bulletin).
- BOMT17 produces slightly smaller diameter (up to .17mm) for cutters 80mm and larger.
EDP |
Part Number |
DC Cutting Dia. |
OAL Overall Length |
ZEFF Eff. Teeth |
DCON Bore Dia. |
KWW Keyway |
CSP Coolant |
DXF File |
STEP Light File |
STEP Detailed File |
|
|---|---|---|---|---|---|---|---|---|---|---|---|
| 3027840 | 2J1G040R00 | 40.00 mm | 40.00 mm | 3 | 16.00 mm | 8.40 mm | Yes | ||||
| 3027841 | 2J1G050R00 | 50.00 mm | 40.00 mm | 4 | 22.00 mm | 10.40 mm | Yes | ||||
| 3027842 | 2J1G050R01 | 50.00 mm | 40.00 mm | 5 | 22.00 mm | 10.40 mm | Yes | ||||
| 3027843 | 2J1G063R00 | 63.00 mm | 40.00 mm | 5 | 22.00 mm | 10.40 mm | Yes | ||||
| 3027844 | 2J1G063R01 | 63.00 mm | 40.00 mm | 6 | 22.00 mm | 10.40 mm | Yes | ||||
| 3027845 | 2J1G080R00 | 80.00 mm | 50.00 mm | 6 | 27.00 mm | 12.40 mm | Yes | ||||
| 3027846 | 2J1G080R01 | 80.00 mm | 50.00 mm | 8 | 27.00 mm | 12.40 mm | Yes | ||||
| 3027847 | 2J1G100R00 | 100.00 mm | 50.00 mm | 6 | 32.00 mm | 14.40 mm | Yes | ||||
| 3027848 | 2J1G100R01 | 100.00 mm | 50.00 mm | 9 | 32.00 mm | 14.40 mm | Yes | ||||
| 3027849 | 2J1G125R00 | 125.00 mm | 63.00 mm | 7 | 40.00 mm | 16.00 mm | No | ||||
| 3027850 | 2J1G160R00 | 160.00 mm | 63.00 mm | 8 | 40.00 mm | 16.00 mm | No |
