Series: TDA
Representative image shown ⓘ
The image above is intended to represent the product series for illustrative purposes only. The actual product may vary.
Product Series Features:
- Full Radius
- Precision Double-Ended Insert
- For Grooving, Turning, & Profiling
- A-Type Chipbreaker
Part Number |
SSC Insert Seat Size |
CW Cutting Width |
RE Corner Radius |
CDX Cutting Depth Max. |
WB Body Width |
INSL Insert Length |
S1 Thickness |
AN Clearance Angle Major |
DAXIN Axial Groove I.D. Min. |
DMIN Min. Bore Dia. |
FEEDGN Grooving Feed Min. |
FEEDGX Grooving Feed Max. |
FEEDN Turning Feed Min. |
FEEDX Turning Feed Max. |
APMX Turning Depth of Cut Max. |
|
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| TDA5.00-2.50 | 5 | 0.197 | 0.098 | 0.866 | 0.157 | 0.980 | 0.205 | 7 | 1.457 | 1.733 | 0.0040 | 0.0100 | 0.008 | 0.019 | 0.098 |
Part Number |
SSC Insert Seat Size |
CW Cutting Width |
RE Corner Radius |
CDX Cutting Depth Max. |
WB Body Width |
INSL Insert Length |
S1 Thickness |
AN Clearance Angle Major |
DAXIN Axial Groove I.D. Min. |
DMIN Min. Bore Dia. |
FEEDGN Grooving Feed Min. |
FEEDGX Grooving Feed Max. |
FEEDN Turning Feed Min. |
FEEDX Turning Feed Max. |
APMX Turning Depth of Cut Max. |
|
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| TDA3.00-1.50 | 3 | 0.118 | 0.059 | 0.708 | 0.095 | 0.790 | 0.185 | 7 | 1.614 | 1.496 | 0.0030 | 0.0060 | 0.006 | 0.012 | 0.059 | |
| TDA4.00-2.00 | 4 | 0.157 | 0.079 | 0.670 | 0.118 | 0.790 | 0.185 | 7 | 1.339 | 1.496 | 0.0040 | 0.0090 | 0.008 | 0.017 | 0.079 | |
| TDA4.78-2.39 | 5 | 0.188 | 0.094 | 0.866 | 0.157 | 0.980 | 0.205 | 7 | 1.457 | 1.733 | 0.0040 | 0.0100 | 0.008 | 0.019 | 0.098 | |
| TDA5.00-2.50 | 5 | 0.197 | 0.098 | 0.866 | 0.157 | 0.980 | 0.205 | 7 | 1.457 | 1.733 | 0.0040 | 0.0100 | 0.008 | 0.019 | 0.098 | |
| TDA6.00-3.00 | 6 | 0.236 | 0.118 | 0.827 | 0.157 | 0.980 | 0.205 | 7 | 1.457 | 1.733 | 0.0040 | 0.0110 | 0.008 | 0.023 | 0.118 | |
| TDA6.35-3.18 | 6 | 0.250 | 0.125 | 0.827 | 0.157 | 0.980 | 0.205 | 7 | 1.300 | 1.580 | 0.0050 | 0.0130 | 0.009 | 0.024 | 0.138 | |
| TDA8.00-4.00 | 8 | 0.315 | 0.157 | 0.984 | 0.235 | 1.180 | 0.252 | 10 | 1.024 | 1.457 | 0.0060 | 0.0150 | 0.009 | 0.026 | 0.157 |
Groove-Turn Chip Breakers
- 1st choice for general use in groove-turn
- Multi functional chip breaker for external, internal, and face machining
- Low cutting force and good chip control
- Medium-to-high feed grooving, low-to-medium feed turning
- Steel, stainless steel and heat resistant alloy
- For external and internal grooving as well as turning applications
- Good chip control when external face grooving and turning
- Flat bottom surface machining
- Low-to-medium feed grooving, medium-to-high feed turning
- Ideal for steel, stainless steel, cast iron and super alloys machining
- Stable cutting edge and flat bottom surface machining in grooving and parting
- Covers C-type chip breaker applications including a built-in chip breaker for turning applications
- Medium-to-high feed range
- Steel, cast iron, stainless steel and heat resistant alloys
- 1st choice for side turning of cast iron
- Turning and grooving with various geometry
- Steel and cast iron
- High feed rate
- 1st choice for profiling in steel and cast iron
- Tough cutting edge
- Good chip control even in low depth
- Good surface finish
- High feed rate and low depth of cut
- 1st choice for medium to finishing machining of heat-resistant super alloys
- For external and internal profiling, turning and grooving applications
- Low cutting force and good surface finish due to the sharp edge
- Precision machining and excellent repeatability
- 1st choice for profiling in non-ferrous materials
- Very sharp cutting edge
- Ceramic insert
- Recommended for aged cast iron material
- Not recommended for grooving in steel
