Series: SP6H Hi-Feed Face Mill (12.7mm Insert)
Representative image shown ⓘ
The image above is intended to represent the product series for illustrative purposes only. The actual product may vary.
Product Series Features:
- Ø2.00-4.00”
- .059" Depth of cut
- 12.7 mm Insert with 4 indexes
- 10° Hi-feed rougher
- Heavy duty & super strong!
- Excellent performance & economy!
EDP |
Part Number |
DCX Cutting Dia. Max. |
DC Cutting Dia. |
OAL Overall Length |
ZEFF Eff. Teeth |
REEQ Program Radius Equivalent |
DCON Bore Dia. |
KWW Keyway |
RMPX Ramp Angle Max. |
DXF File |
STEP Light File |
STEP Detailed File |
|
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3026092 | SP6H-02R02 | 2.000 | 1.151 | 1.750 | 4 | 0.105 | 0.750 | 0.31 | 0.40 | NA |
Notes:
- **Note: OBSOLETE PRODUCT LINE
- Refer to the following for stocked alternatives:
- NuMax HFA, series EG5J, EG6J
- NuMax HF, series 8G5A, 8G6A
- Insert screw tightening torque: 30-35 in*lb.
- SP6N uses 18mm IC insert
EDP |
Part Number |
DCX Cutting Dia. Max. |
DC Cutting Dia. |
OAL Overall Length |
ZEFF Eff. Teeth |
REEQ Program Radius Equivalent |
DCON Bore Dia. |
KWW Keyway |
RMPX Ramp Angle Max. |
DXF File |
STEP Light File |
STEP Detailed File |
|
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3030241 | SP6H-02R01 | 2.000 | 1.151 | 1.750 | 5 | 0.105 | 0.750 | 0.31 | 0.40 | NA | |||
| 3026092 | SP6H-02R02 | 2.000 | 1.151 | 1.750 | 4 | 0.105 | 0.750 | 0.31 | 0.40 | NA | |||
| 3026108 | SP6H-03R02 | 3.000 | 2.139 | 1.750 | 7 | 0.108 | 1.000 | 0.38 | 0.20 | ||||
| 3026991 | SP6H-04R02 | 4.000 | 3.178 | 2.500 | 9 | 0.109 | 1.500 | 0.63 | 0.20 | NA |
