Series: RDC
Product Series Features:
- Pressed Double-Ended Insert
- For Parting & Grooving
- C-Type Chipbreaker
Part Number |
SSC Insert Seat Size |
CW Cutting Width |
RE Corner Radius |
CDX Cutting Depth Max. |
WB Body Width |
INSL Insert Length |
IH Insert Hand |
FEEDGN Grooving Feed Min. |
FEEDGX Grooving Feed Max. |
|
|---|---|---|---|---|---|---|---|---|---|---|
| RDC2 | 2 | 0.079 | 0.008 | 0.512 | 0.067 | 0.551 | Neutral | 0.002 | 0.007 |
Part Number |
SSC Insert Seat Size |
CW Cutting Width |
RE Corner Radius |
CDX Cutting Depth Max. |
WB Body Width |
INSL Insert Length |
IH Insert Hand |
FEEDGN Grooving Feed Min. |
FEEDGX Grooving Feed Max. |
|
|---|---|---|---|---|---|---|---|---|---|---|
| RDC2 | 2 | 0.079 | 0.008 | 0.512 | 0.067 | 0.551 | Neutral | 0.002 | 0.007 | |
| RDC2-15R | 2 | 0.079 | 0.008 | 0.512 | 0.067 | 0.551 | Right | 0.001 | 0.006 | |
| RDC2-15RS | 2 | 0.079 | 0.001 | 0.512 | 0.067 | 0.535 | Right | 0.001 | 0.005 | |
| RDC2-6R | 2 | 0.079 | 0.008 | 0.512 | 0.067 | 0.551 | Right | 0.001 | 0.006 | |
| RDC3 | 3 | 0.118 | 0.008 | 0.512 | 0.094 | 0.551 | Neutral | 0.003 | 0.010 | |
| RDC3-15R | 3 | 0.118 | 0.008 | 0.512 | 0.094 | 0.551 | Right | 0.002 | 0.007 | |
| RDC3-6R | 3 | 0.118 | 0.008 | 0.512 | 0.094 | 0.551 | Right | 0.002 | 0.007 |
Parting and Grooving Chip Breakers
- 1st choice for general use in parting and deep grooving
- Stable cutting edge & interrupted cut
- Medium-to-high feed
- For carbon steel, alloy steel and cast iron
- For hard materials
- 1st choice for soft materials in parting and deep grooving
- Sharp cutting edge & low cutting force
- Low-to-medium feed
- Tubes, small diameter and thin-wall parts
- For stainless steel & low carbon steel
- For heat resistant super alloy
- Sharp cutting edge and wide groove with minimized burrs
- For tubes of small size workpieces
- For stainless steel and mild steel
- Narrow chip breaker
- Good chip control in low feed of ductile materials and low-carbon steel
- For Cr-Ni alloy steel and bearing steel
