Series: 15N1F - Front-Back Chamfer End Mill
Representative image shown ⓘ
The image above is intended to represent the product series for illustrative purposes only. The actual product may vary.
Product Series Features:
- Ø.50" Min.
- Weldon Shank
- 9 mm Insert with 4 indexes
- Cutting Edge Angle: 45°
EDP |
Part Number |
DC Cutting Dia. |
DCX Cutting Dia. Max. |
KAPR Cutting Edge Angle |
APMX Depth of Cut Max. |
KAPR2 Cutting Edge Angle |
APMX2 Depth of Cut Max. |
LUX Usable Length Max. |
LPR Projection Length |
OAL Overall Length |
ZEFF Eff. Teeth |
DN Neck Dia. |
DCON Shank Dia. |
DXF File |
STEP Light File |
STEP Detailed File |
|
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3010303 | 15N1F-1001584R01 | 0.500 | 1.000 | 45 | 0.230 | 45 | 0.230 | - | 1.50 | 3.50 | 1 | 0.50 | 0.7500 |
EDP |
Part Number |
DC Cutting Dia. |
DCX Cutting Dia. Max. |
KAPR Cutting Edge Angle |
APMX Depth of Cut Max. |
KAPR2 Cutting Edge Angle |
APMX2 Depth of Cut Max. |
LUX Usable Length Max. |
LPR Projection Length |
OAL Overall Length |
ZEFF Eff. Teeth |
DN Neck Dia. |
DCON Shank Dia. |
DXF File |
STEP Light File |
STEP Detailed File |
|
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3010303 | 15N1F-1001584R01 | 0.500 | 1.000 | 45 | 0.230 | 45 | 0.230 | - | 1.50 | 3.50 | 1 | 0.50 | 0.7500 | ||||
| 3010302 | 15N1F-1201584R01 | 0.750 | 1.250 | 45 | 0.230 | 45 | 0.230 | - | 1.50 | 3.50 | 2 | 0.72 | 0.7500 |
