Series: TQS27
Representative image shown ⓘ
The image above is intended to represent the product series for illustrative purposes only. The actual product may vary.
Product Series Features:
- Precision Four Corner Insert
- For Parting, Grooving, & Turning
- Flat Top
Part Number |
CW Cutting Width |
RE Corner Radius |
CDX Cutting Depth Max. |
S1 Thickness (Overall) |
CUTDIA Max. Work Piece Dia. @ CDX .177" |
CUTDIA Max. Work Piece Dia. @ CDX .197" |
FEEDGN Grooving Feed Min. |
FEEDGX Grooving Feed Max. |
|
|---|---|---|---|---|---|---|---|---|---|
| TQS27-2.39-0.15 | 0.094 | 0.006 | 0.197 | 0.157 | 7.09 | 5.12 | 0.0010 | 0.0060 |
Part Number |
CW Cutting Width |
RE Corner Radius |
CDX Cutting Depth Max. |
S1 Thickness (Overall) |
CUTDIA Max. Work Piece Dia. @ CDX .177" |
CUTDIA Max. Work Piece Dia. @ CDX .197" |
FEEDGN Grooving Feed Min. |
FEEDGX Grooving Feed Max. |
|
|---|---|---|---|---|---|---|---|---|---|
| TQS27-1.00-0.10 | 0.039 | 0.004 | 0.138 | 0.157 | - | - | 0.0010 | 0.0030 | |
| TQS27-1.50-0.20 | 0.059 | 0.008 | 0.197 | 0.157 | 7.09 | 5.12 | 0.0010 | 0.0040 | |
| TQS27-2.00-0.20 | 0.079 | 0.008 | 0.252 | 0.157 | 7.09 | 5.12 | 0.0010 | 0.0040 | |
| TQS27-2.39-0.15 | 0.094 | 0.006 | 0.197 | 0.157 | 7.09 | 5.12 | 0.0010 | 0.0060 | |
| TQS27-2.50-0.20 | 0.098 | 0.008 | 0.197 | 0.157 | 7.09 | 5.12 | 0.0010 | 0.0060 | |
| TQS27-3.00-0.20 | 0.118 | 0.008 | 0.252 | 0.157 | 7.09 | 5.31 | 0.0010 | 0.0060 | |
| TQS27-3.18-0.20 | 0.125 | 0.008 | 0.252 | 0.157 | 7.09 | 5.31 | 0.0010 | 0.0060 |
Chip Breakers
- 1st choice for general grooving at higher feed rates
- Stable and straight cutting edge
- For carbon steel and alloy steel
- 1st choice for soft materials at lower feed rates
- Sharp cutting edge
- For stainless, HRSA, and low carbon steel
- High positive rake angle
- Straight cutting edge
- Low cutting force
- Flat top
