Series: 2J1E - 90° Face Mill
Representative image shown ⓘ
The image above is intended to represent the product series for illustrative purposes only. The actual product may vary.
Product Series Features:
- Ø2.00-8.00"
- .66" Depth of cut
- 18 mm Insert with 2 indexes
- 32-63 Ra surface finishes when engaging the wiper (WEP)
- Insert corners: .015", .031", .062", .093", .125" R.
- Use 2J4E for .187" & .250 R
EDP |
Part Number |
DC Cutting Dia. |
APMX Depth of Cut Max. |
OAL Overall Length |
ZEFF Eff. Teeth |
DCON Bore Dia. |
KWW Keyway |
DBC Bolt Circle Dia. |
CSP Coolant |
RMPX Ramp Angle Max. |
DXF File |
STEP Light File |
STEP Detailed File |
|
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3017398 | 2J1E-20R01 | 2.000 | 0.660 | 1.570 | 3 | 0.7500 | 0.312 | NA | Yes | 3.0 | NA | |||
| 3017399 | 2J1E-20R02 | 2.000 | 0.660 | 1.570 | 5 | 0.7500 | 0.312 | NA | Yes | 3.0 | NA | |||
| 3017400 | 2J1E-25R01 | 2.500 | 0.660 | 1.570 | 4 | 0.7500 | 0.312 | NA | Yes | 2.6 | NA | |||
| 3017401 | 2J1E-25R02 | 2.500 | 0.660 | 1.570 | 6 | 0.7500 | 0.312 | NA | Yes | 2.6 | NA | |||
| 3017402 | 2J1E-30R01 | 3.000 | 0.660 | 1.750 | 5 | 1.0000 | 0.375 | NA | Yes | 1.8 | NA | |||
| 3012938 | 2J1E-30R02 | 3.000 | 0.660 | 1.750 | 7 | 1.0000 | 0.375 | NA | Yes | 1.8 | NA | |||
| 3024025 | 2J1E-30R03 | 3.000 | 0.660 | 1.750 | 4 | 1.0000 | 0.375 | NA | Yes | 1.8 | NA | |||
| 3012939 | 2J1E-40R01 | 4.000 | 0.660 | 2.000 | 6 | 1.5000 | 0.625 | NA | No | 1.2 | NA | |||
| 3017403 | 2J1E-40R02 | 4.000 | 0.660 | 2.000 | 8 | 1.5000 | 0.625 | NA | No | 1.2 | NA | |||
| 3012941 | 2J1E-50R01 | 5.000 | 0.660 | 2.000 | 7 | 1.5000 | 0.625 | NA | No | 0.9 | NA | NA | ||
| 3012942 | 2J1E-50R02 | 5.000 | 0.660 | 2.000 | 9 | 1.5000 | 0.625 | NA | No | 0.9 | NA | |||
| 3012943 | 2J1E-60R01 | 6.000 | 0.660 | 2.000 | 8 | 2.0000 | 0.750 | NA | No | 0.6 | NA | |||
| 3012944 | 2J1E-60R02 | 6.000 | 0.660 | 2.000 | 10 | 2.0000 | 0.750 | NA | No | 0.6 | NA | |||
| 3012839 | 2J1E-80R01 | 8.000 | 0.680 | 2.480 | 10 | 2.5000 | 1.000 | 4.00 | No | - | NA | NA | ||
| 3012945 | 2J1E-80R02 | 8.000 | 0.680 | 2.480 | 12 | 2.5000 | 1.000 | 4.00 | No | - | n/a | NA | NA |
Notes:
- Cutter body must be relieved when using insert corner radii larger than R.062 (Body R" = Insert R" - .02")
