Series: 12J1E - 90° End Mill
Representative image shown ⓘ
The image above is intended to represent the product series for illustrative purposes only. The actual product may vary.
Product Series Features:
- Ø1.00-2.00 (Weldon)
- .66" Depth of Cut (18 mm Insert)
- 32-63 Ra surface finishes when engaging integrated wiper (WEP)
- Insert Corner: .015" .031" .062" .093" & .125" R. Use 12J4E for .187" & .250" R
- Insert with 2 Indexes
EDP |
Part Number |
DC Cutting Dia. |
LUX Usable Length Max. |
LPR Protruding Length |
OAL Overall Length |
ZEFF Eff. Teeth |
DCON Shank Dia. |
CSP Coolant |
RMPX Ramp Angle Max. |
DXF File |
STEP Light File |
STEP Detailed File |
|
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3040332 | 12J1E-0901780R01 | 0.970 | 1.37 | 1.75 | 4.00 | 2 | 1.0000 | Yes | 6.2 | ||||
| 3012023 | 12J1E-1001780R01 | 1.000 | 1.39 | 1.75 | 4.00 | 2 | 1.0000 | Yes | 6.0 | ||||
| 3016776 | 12J1E-1002780R01 | 1.000 | 2.39 | 2.75 | 5.00 | 2 | 1.0000 | Yes | 6.0 | ||||
| 3017392 | 12J1E-1003780R01 | 1.000 | 3.39 | 3.75 | 6.00 | 2 | 1.0000 | Yes | 6.0 | ||||
| 3013156 | 12J1E-1005780R01 | 1.000 | 5.61 | 5.75 | 8.00 | 2 | 1.0000 | No | - | ||||
| 3013157 | 12J1E-1005781R01 | 1.000 | 1.18 | 5.75 | 8.00 | 2 | 1.2500 | No | - | n/a | n/a | n/a | |
| 3017393 | 12J1E-1202281R01 | 1.250 | 1.44 | 1.50 | 4.50 | 3 | 1.2500 | Yes | 4.1 | ||||
| 3017394 | 12J1E-1204281R01 | 1.250 | 4.11 | 4.25 | 6.50 | 3 | 1.2500 | Yes | 4.1 | ||||
| 3013158 | 12J1E-1206281R01 | 1.250 | 6.12 | 6.25 | 8.50 | 2 | 1.2500 | No | - | ||||
| 3017395 | 12J1E-1502281R01 | 1.500 | 2.25 | 2.25 | 4.50 | 4 | 1.2500 | Yes | 3.0 | ||||
| 3017397 | 12J1E-1502281R03 | 1.500 | 2.25 | 2.25 | 4.50 | 3 | 1.2500 | Yes | 3.0 | ||||
| 3016779 | 12J1E-1504281R01 | 1.500 | 4.25 | 4.25 | 6.50 | 3 | 1.2500 | Yes | 3.0 | ||||
| 3017396 | 12J1E-2002281R01 | 2.000 | 2.25 | 2.25 | 4.50 | 5 | 1.2500 | Yes | 3.0 |
