Series: 15J1E (8 mm Insert) Weldon Shank
Representative image shown ⓘ
The image above is intended to represent the product series for illustrative purposes only. The actual product may vary.
Product Series Features:
- 90° End Mill
- .31" Max. depth of cut
- 8 mm Insert with 4 indexes
- Insert corners: .020", .031", .062" R
EDP |
Part Number |
DC Cutting Dia. |
LUX Usable Length Max. |
LPR Protruding Length |
OAL Overall Length |
ZEFF Eff. Teeth |
DCON Shank Dia. |
RMPX Ramp Angle Max. |
DXF File |
STEP Light File |
STEP Detailed File |
|
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3016479 | 15J1E-0601584R01 | 0.625 | 1.31 | 1.50 | 3.50 | 1 | 0.7500 | 2.5 | NA | NA | NA | |
| 3017064 | 15J1E-0701784R01 | 0.750 | 1.70 | 1.75 | 3.75 | 2 | 0.7500 | 2.5 | NA | NA | NA | |
| 3012732 | 15J1E-0703084R01 | 0.750 | 2.95 | 3.00 | 5.00 | 2 | 0.7500 | 2.5 | NA | NA | NA | |
| 3017065 | 15J1E-1001780R01 | 1.000 | 1.70 | 1.75 | 4.00 | 3 | 1.0000 | 1.5 | NA | NA | NA | |
| 3012733 | 15J1E-1003580R01 | 1.000 | 3.45 | 3.50 | 5.75 | 2 | 1.0000 | 1.5 | ||||
| 3012734 | 15J1E-1201780R01 | 1.250 | 1.72 | 1.75 | 4.00 | 4 | 1.0000 | 1.0 | NA | NA | NA | |
| 3012735 | 15J1E-1203580R01 | 1.250 | - | 3.50 | 5.75 | 3 | 1.0000 | 1.0 | NA | NA | NA |
Notes:
- **Note, OBSOLETE product series.
- Refer to the following for stocked alternatives:
- DiPosDuo, series 1TJ1F
- DiPosQuad, series 1DJ1E
- DiPosTrio, series 1DJ1F
- HiPosTrio, series 1KJ1D
