Series: 12J1E - 90° End Mill (V-Flange)
Representative image shown ⓘ
The image above is intended to represent the product series for illustrative purposes only. The actual product may vary.
Product Series Features:
- Ø1.00 - 1.50" (V-Flange)
- .66" Depth of Cut (18 mm Insert)
- 32-63 Ra surface finishes when engaging integrated wiper (WEP)
- Insert Corner: .015" .031" .062" .093" & .125" R.
- Insert with 2 Indexes
EDP |
Part Number |
DC Cutting Dia. |
LUX Usable Length Max. |
OAL Overall Length |
ZEFF Eff. Teeth |
CCMS Connection Code Machine Side |
RMPX Ramp Angle Max. |
DXF File |
STEP Light File |
STEP Detailed File |
|
|---|---|---|---|---|---|---|---|---|---|---|---|
| 3016768 | 12J1E-1004029R01 | 1.000 | 2.50 | 6.69 | 2 | ICTC #40 | 6.0 | NA | |||
| 3016777 | 12J1E-1202829R01 | 1.250 | 2.00 | 5.56 | 3 | ICTC #40 | 4.1 | NA | NA | ||
| 3016778 | 12J1E-1502829R01 | 1.500 | 2.00 | 5.56 | 3 | ICTC #40 | 3.0 | NA | NA |
Notes:
- **Note, product series is being PHASED OUT.
- Refer to the following for stocked alternatives:
- HiPos+ series 12J1R or 12J1G
- HiPosTrio series 1KJ1G
- DiPosDuo series 1TJ1F or 1TJ1G
